| View previous topic :: View next topic |
| Author |
Message |
Joseph_sys
Advocate
Joined: 08 Jun 2004
Posts: 2712
Location: Edmonton, AB
|
 Posted: Sun Feb 07, 2021 5:20 am Post subject: XFCE4 - black screen after log-in |
 |
|
I have a new Gentoo installation and I'm experiencing strange behavior with XFCE4, sometime when I Log-out and try to Log-In again,
the screen is missing top or bottom panels or is just black background.
I had to log-into the system from another computer and restart "xdm" sometimes several times. (I'm using slim) . I've notice this behavior on two different recently installed Gentoo system (both are using XFCE).
Here is what dmesg is showing: | Code: | [77293.342781] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[77293.342846] caller _nv000709rm+0x1af/0x200 [nvidia] mapping multiple BARs
[77306.744049] traps: xfsettingsd[27362] trap int3 ip:7f33ce395e25 sp:7ffc5e0ea570 error:0
[77306.744050] traps: xfsettingsd[27363] trap int3 ip:7f8f9addfe25 sp:7ffe29ba8e40 error:0
[77306.744052] in libglib-2.0.so.0.6400.5[7f33ce35a000+86000]
[77306.744052] in libglib-2.0.so.0.6400.5[7f8f9ada4000+86000]
[77306.745743] traps: xfsettingsd[27366] trap int3 ip:7f5b12a34e25 sp:7ffdfa6d9450 error:0 in libglib-2.0.so.0.6400.5[7f5b129f9000+86000]
[77306.745751] traps: xfsettingsd[27367] trap int3 ip:7fce94fa7e25 sp:7ffd7d846980 error:0 in libglib-2.0.so.0.6400.5[7fce94f6c000+86000]
[77306.747389] traps: xfsettingsd[27369] trap int3 ip:7f7f69209e25 sp:7ffff2db31d0 error:0 in libglib-2.0.so.0.6400.5[7f7f691ce000+86000]
[77306.747506] traps: xfsettingsd[27370] trap int3 ip:7f8be5533e25 sp:7ffc267124e0 error:0 in libglib-2.0.so.0.6400.5[7f8be54f8000+86000]
[77306.748799] traps: xfsettingsd[27371] trap int3 ip:7f0007bf1e25 sp:7ffc96a4cb30 error:0 in libglib-2.0.so.0.6400.5[7f0007bb6000+86000]
[77306.749593] traps: xfsettingsd[27372] trap int3 ip:7fed1022be25 sp:7ffc42986120 error:0 in libglib-2.0.so.0.6400.5[7fed101f0000+86000]
[77306.750678] traps: xfsettingsd[27373] trap int3 ip:7f630cc74e25 sp:7ffe501c6270 error:0 in libglib-2.0.so.0.6400.5[7f630cc39000+86000]
[77306.750692] traps: xfsettingsd[27374] trap int3 ip:7f8fa1b16e25 sp:7ffc8c58a2b0 error:0 in libglib-2.0.so.0.6400.5[7f8fa1adb000+86000]
[77311.337281] elogind-daemon[1565]: Removed session 1.
[77413.172468] elogind-daemon[1565]: New session 13 of user joseph.
[77460.380139] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[77460.380206] caller _nv000709rm+0x1af/0x200 [nvidia] mapping multiple BARs
[77489.910717] elogind-daemon[1565]: Existing logind session ID 13 used by new audit session, ignoring.
[77489.910792] elogind-daemon[1565]: New session c1 of user joseph.
[77490.343551] show_signal: 1 callbacks suppressed
[77490.343552] traps: xfsettingsd[28678] trap int3 ip:7f009378be25 sp:7ffca8b3e3e0 error:0 in libglib-2.0.so.0.6400.5[7f0093750000+86000]
[77490.343930] traps: xfsettingsd[28680] trap int3 ip:7f6a5f01fe25 sp:7ffd2b285e40 error:0 in libglib-2.0.so.0.6400.5[7f6a5efe4000+86000]
[77490.345990] traps: xfsettingsd[28684] trap int3 ip:7fdd8d90be25 sp:7ffd0ece3770 error:0 in libglib-2.0.so.0.6400.5[7fdd8d8d0000+86000]
[77490.348030] traps: xfsettingsd[28686] trap int3 ip:7f71173d0e25 sp:7fff2f3f0d40 error:0 in libglib-2.0.so.0.6400.5[7f7117395000+86000]
[77490.348558] traps: xfsettingsd[28687] trap int3 ip:7fc8c21e9e25 sp:7fff73baa8d0 error:0 in libglib-2.0.so.0.6400.5[7fc8c21ae000+86000]
[77490.348672] traps: xfsettingsd[28688] trap int3 ip:7f75bd90ce25 sp:7ffdc99800f0 error:0 in libglib-2.0.so.0.6400.5[7f75bd8d1000+86000]
[77490.349626] traps: xfsettingsd[28689] trap int3 ip:7ff1562cbe25 sp:7ffd0ea09a00 error:0 in libglib-2.0.so.0.6400.5[7ff156290000+86000]
[77490.349650] traps: xfsettingsd[28690] trap int3 ip:7f1963180e25 sp:7fff7c734df0 error:0 in libglib-2.0.so.0.6400.5[7f1963145000+86000]
[77490.351248] traps: xfsettingsd[28691] trap int3 ip:7f11e1e20e25 sp:7fff5aa1b610 error:0 in libglib-2.0.so.0.6400.5[7f11e1de5000+86000]
[77490.351794] traps: xfsettingsd[28692] trap int3 ip:7f89e16e6e25 sp:7ffcadc97c20 error:0 in libglib-2.0.so.0.6400.5[7f89e16ab000+86000 |
I don't even know where to start looking.
Sometimes I just need to re-boot the computer for X to work with XFCE
| Code: | emerge --info
Portage 3.0.13 (python 3.8.7-final-0, default/linux/amd64/17.1/desktop, gcc-9.3.0, glibc-2.32-r6, 5.4.72-gentoo x86_64)
=================================================================
System uname: Linux-5.4.72-gentoo-x86_64-AMD_Ryzen_7_3800XT_8-Core_Processor-with-glibc2.2.5
KiB Mem: 32854288 total, 14801352 free
KiB Swap: 524284 total, 522236 free
Timestamp of repository gentoo: Sat, 06 Feb 2021 01:00:01 +0000
Head commit of repository gentoo: 3b6683fc05973226a6d6a1cc3f4f6bc62ee867cf
sh bash 5.0_p18
ld GNU ld (Gentoo 2.34 p6) 2.34.0
app-shells/bash: 5.0_p18::gentoo
dev-java/java-config: 2.3.1::gentoo
dev-lang/perl: 5.30.3::gentoo
dev-lang/python: 3.7.9::gentoo, 3.8.7-r1::gentoo, 3.9.1-r1::gentoo
dev-util/cmake: 3.18.5::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/openrc: 0.42.1-r1::gentoo
sys-apps/sandbox: 2.20::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
sys-devel/automake: 1.16.2-r1::gentoo
sys-devel/binutils: 2.34-r2::gentoo, 2.35.1-r1::gentoo
sys-devel/gcc: 9.3.0-r2::gentoo
sys-devel/gcc-config: 2.3.2-r1::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.32-r6::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-max-age: 24
sync-rsync-extra-opts:
sync-rsync-verify-jobs: 1
brother-overlay
location: /var/lib/layman/brother-overlay
masters: gentoo
priority: 50
Local
location: /usr/local/portage
masters: gentoo
priority: 99999999
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA @FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/fax /usr/share/easy-rsa /usr/share/gnupg/qualified.txt /var/spool/fax/etc /var/www/localhost/htdocs/phpmyadmin"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php7.4/ext-active/ /etc/php/cgi-php7.4/ext-active/ /etc/php/cli-php7.4/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c /var/spool/fax/etc/xferfaxlog"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/var/cache/distfiles"
EMERGE_DEFAULT_OPTS="--autounmask-write=y --keep-going --with-bdeps=y"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-march=native -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs collision-protect config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=native -O2 -pipe"
GENTOO_MIRRORS="http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ http://gentoo.osuosl.org/ ftp://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ ftp://ftp.spline.inf.fu-berlin.de/mirrors/gentoo/ http://ftp.spline.inf.fu-berlin.de/mirrors/gentoo/"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j8 --load-average=8"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acpi alsa amd64 apache2 bluetooth branding bzip2 cairo cdda cdr cgi cleartype cli corefonts crypt cups dbus dri dts dvd dvdr elogind emboss encode exif fam flac foomaticdb fortran gdbm gif gimp gimpprint gpm gtk gui iconv icu ipv6 java jpeg kpathsea lcms libglvnd libnotify libtirpc lock mad mng mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds qt5 qtk readline scanner sdl seccomp session spell split-usr ssl startup-notification svg tcpd tetex thunar tiff truetype type1 udev udisks unicode upower usb vorbis wxwidgets x264 xattr xcb xml xv xvid zlib" ABI_X86="64" ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev" KERNEL="linux" L10N="en en-CA" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-4" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_8" PYTHON_TARGETS="python3_8" RUBY_TARGETS="ruby26" SANE_BACKENDS="fujitsu epson2" USERLAND="GNU" VIDEO_CARDS="nvidia" VOICEMAIL_STORAGE="file" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS |
|
|
| Back to top |
|
 |
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3918
|
| Posted: Sun Feb 07, 2021 10:14 am Post subject: |
|
|
Hi
On the second part of your question please read
eselect news read 18
Apparently we are now using display-manager and not xdm.
_________________
 |
|
| Back to top |
|
|
DespLock
n00b
Joined: 27 Jul 2020
Posts: 65
|
| Posted: Sun Feb 07, 2021 8:38 pm Post subject: Re: XFCE4 - black screen after log-in |
|
|
| Joseph_sys wrote: |
[...]
[77306.744049] traps: xfsettingsd[27362] trap int3 ip:7f33ce395e25 sp:7ffc5e0ea570 error:0
[...]
|
trap int 3 is used for debbugers to set breakpoints, so for developers. Should be harmless since programms don't call int3 usually.
There are some things you can try:
1) press <ctrl>+<alt>+F1 to switch to console while you have the black screen
from there run
| Code: |
rc-service xdm stop
startx
|
2) what says X11 log?
=> /var/log/Xorg.0.log.old for previous session
=> /var/log/Xorg.0.log for this session
3) check the instructions for the nvidia driver:
https://wiki.gentoo.org/wiki/NVidia/nvidia-drivers
4) might be related to XFCE setting. Do you save sessions? If yes, disable it and try again
https://askubuntu.com/questions/427842/how-to-permanently-disable-the-save-session-feature-in-xubuntu (old but worked for me)
5) You can also create a new user and see if the issue persist for that one. |
|
| Back to top |
|
|
Joseph_sys
Advocate
Joined: 08 Jun 2004
Posts: 2712
Location: Edmonton, AB
|
| Posted: Sun Feb 07, 2021 9:18 pm Post subject: |
|
|
| alamahant wrote: | Hi
On the second part of your question please read
eselect news read 18
Apparently we are now using display-manager and not xdm. |
Yah, I did but it seems to me the dust hasn't settle yet, it is too fresh. It will be implemented from March I think. |
|
| Back to top |
|
|
Joseph_sys
Advocate
Joined: 08 Jun 2004
Posts: 2712
Location: Edmonton, AB
|
| Posted: Sun Feb 07, 2021 9:31 pm Post subject: Re: XFCE4 - black screen after log-in |
|
|
| DespLock wrote: | | Joseph_sys wrote: |
[...]
[77306.744049] traps: xfsettingsd[27362] trap int3 ip:7f33ce395e25 sp:7ffc5e0ea570 error:0
[...]
|
trap int 3 is used for debbugers to set breakpoints, so for developers. Should be harmless since programms don't call int3 usually.
There are some things you can try:
1) press <ctrl>+<alt>+F1 to switch to console while you have the black screen
from there run
| Code: |
rc-service xdm stop
startx
|
2) what says X11 log?
=> /var/log/Xorg.0.log.old for previous session
=> /var/log/Xorg.0.log for this session
3) check the instructions for the nvidia driver:
https://wiki.gentoo.org/wiki/NVidia/nvidia-drivers
4) might be related to XFCE setting. Do you save sessions? If yes, disable it and try again
https://askubuntu.com/questions/427842/how-to-permanently-disable-the-save-session-feature-in-xubuntu (old but worked for me)
5) You can also create a new user and see if the issue persist for that one. |
Thanks for feedback. I will eventually implement new "display-manager" but I think the "slim" (I'm using) is falling apart, it doesn't have a maintainer.
So for now I'm starting X from .xinitrc
| Code: | cat .xinitrc
exec startxfce4
cat .bash_profile
...
if [[ -f ~/.bashrc ]] ; then
. ~/.bashrc
fi
if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then exec startx; fi |
It works OK less complicated.
But her is my /var/log/Xorg.0.log
If you see something that I could change.
| Code: | X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 15.838] Build Operating System: Linux 5.4.80-gentoo-r1 x86_64 Gentoo
[ 15.838] Current Operating System: Linux white 5.4.80-gentoo-r1 #5 SMP Mon Jan 25 05:53:03 MST 2021 x86_64
[ 15.838] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.80-gentoo-r1 root=/dev/nvme0n1p4 ro
[ 15.838] Build Date: 24 January 2021 09:47:01PM
[ 15.838]
[ 15.838] Current version of pixman: 0.40.0
[ 15.838] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.838] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.838] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 7 13:47:49 2021
[ 15.838] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.839] (==) No Layout section. Using the first Screen section.
[ 15.839] (==) No screen section available. Using defaults.
[ 15.839] (**) |-->Screen "Default Screen Section" (0)
[ 15.839] (**) | |-->Monitor "<default monitor>"
[ 15.839] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.839] (==) Automatically adding devices
[ 15.839] (==) Automatically enabling devices
[ 15.839] (==) Automatically adding GPU devices
[ 15.839] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 15.839] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.839] Entry deleted from font path.
[ 15.839] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.839] Entry deleted from font path.
[ 15.839] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.839] Entry deleted from font path.
[ 15.840] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.840] Entry deleted from font path.
[ 15.840] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.840] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.840] Entry deleted from font path.
[ 15.840] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.840] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.840] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 15.840] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.840] (II) Loader magic: 0x55927420fce0
[ 15.840] (II) Module ABI versions:
[ 15.840] X.Org ANSI C Emulation: 0.4
[ 15.840] X.Org Video Driver: 24.1
[ 15.840] X.Org XInput driver : 24.1
[ 15.840] X.Org Server Extension : 10.0
[ 15.840] (++) using VT number 7
[ 15.840] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 15.840] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.842] (--) PCI:*(8@0:0:0) 10de:1f82:1458:4027 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 15.842] (II) LoadModule: "glx"
[ 15.842] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 15.845] (II) Module glx: vendor="X.Org Foundation"
[ 15.845] compiled for 1.20.10, module version = 1.0.0
[ 15.845] ABI class: X.Org Server Extension, version 10.0
[ 15.845] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 15.845] loading driver: nvidia
[ 15.845] (==) Matched nvidia as autoconfigured driver 0
[ 15.845] (==) Matched nouveau as autoconfigured driver 1
[ 15.845] (==) Matched nv as autoconfigured driver 2
[ 15.845] (==) Matched modesetting as autoconfigured driver 3
[ 15.845] (==) Matched fbdev as autoconfigured driver 4
[ 15.845] (==) Matched vesa as autoconfigured driver 5
[ 15.845] (==) Assigned the driver to the xf86ConfigLayout
[ 15.845] (II) LoadModule: "nvidia"
[ 15.845] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 15.846] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.846] compiled for 1.6.99.901, module version = 1.0.0
[ 15.846] Module class: X.Org Video Driver
[ 15.846] (II) LoadModule: "nouveau"
[ 15.846] (WW) Warning, couldn't open module nouveau
[ 15.846] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 15.846] (II) LoadModule: "nv"
[ 15.846] (WW) Warning, couldn't open module nv
[ 15.846] (EE) Failed to load module "nv" (module does not exist, 0)
[ 15.846] (II) LoadModule: "modesetting"
[ 15.846] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 15.847] (II) Module modesetting: vendor="X.Org Foundation"
[ 15.847] compiled for 1.20.10, module version = 1.20.10
[ 15.847] Module class: X.Org Video Driver
[ 15.847] ABI class: X.Org Video Driver, version 24.1
[ 15.847] (II) LoadModule: "fbdev"
[ 15.847] (WW) Warning, couldn't open module fbdev
[ 15.847] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.847] (II) LoadModule: "vesa"
[ 15.847] (WW) Warning, couldn't open module vesa
[ 15.847] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 15.847] (II) NVIDIA dlloader X Driver 455.45.01 Thu Nov 5 23:01:05 UTC 2020
[ 15.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 15.848] (II) Loading sub module "fb"
[ 15.848] (II) LoadModule: "fb"
[ 15.848] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 15.848] (II) Module fb: vendor="X.Org Foundation"
[ 15.848] compiled for 1.20.10, module version = 1.0.0
[ 15.848] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.848] (II) Loading sub module "wfb"
[ 15.848] (II) LoadModule: "wfb"
[ 15.848] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 15.849] (II) Module wfb: vendor="X.Org Foundation"
[ 15.849] compiled for 1.20.10, module version = 1.0.0
[ 15.849] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.849] (II) Loading sub module "ramdac"
[ 15.849] (II) LoadModule: "ramdac"
[ 15.849] (II) Module "ramdac" already built-in
[ 15.849] (WW) Falling back to old probe method for modesetting
[ 15.849] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.849] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 15.849] (==) NVIDIA(0): RGB weight 888
[ 15.849] (==) NVIDIA(0): Default visual is TrueColor
[ 15.849] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.849] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.849] (II) Loading sub module "glxserver_nvidia"
[ 15.849] (II) LoadModule: "glxserver_nvidia"
[ 15.849] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so
[ 15.867] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 15.867] compiled for 1.6.99.901, module version = 1.0.0
[ 15.867] Module class: X.Org Server Extension
[ 15.867] (II) NVIDIA GLX Module 455.45.01 Thu Nov 5 22:58:18 UTC 2020
[ 15.868] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 16.403] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:8:0:0
[ 16.403] (--) NVIDIA(0): DFP-0
[ 16.403] (--) NVIDIA(0): DFP-1
[ 16.403] (--) NVIDIA(0): DFP-2
[ 16.403] (--) NVIDIA(0): DFP-3 (boot)
[ 16.403] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1650 (TU117-A) at PCI:8:0:0 (GPU-0)
[ 16.403] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 16.403] (--) NVIDIA(0): VideoBIOS: 90.17.4d.00.68
[ 16.403] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.403] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 16.403] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 16.403] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 16.403] (--) NVIDIA(GPU-0):
[ 16.403] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 16.403] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 16.403] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[ 16.403] (--) NVIDIA(GPU-0):
[ 16.403] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 16.403] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 16.403] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 16.403] (--) NVIDIA(GPU-0):
[ 16.433] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): connected
[ 16.433] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): Internal TMDS
[ 16.433] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): 600.0 MHz maximum pixel clock
[ 16.433] (--) NVIDIA(GPU-0):
[ 16.472] (==) NVIDIA(0):
[ 16.472] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 16.472] (==) NVIDIA(0): will be used as the requested mode.
[ 16.472] (==) NVIDIA(0):
[ 16.473] (II) NVIDIA(0): Validated MetaModes:
[ 16.473] (II) NVIDIA(0): "DFP-3:nvidia-auto-select"
[ 16.473] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[ 16.519] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[ 16.519] (--) NVIDIA(0): option
[ 16.519] (II) UnloadModule: "modesetting"
[ 16.519] (II) Unloading modesetting
[ 16.519] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 16.519] (II) NVIDIA: access.
[ 16.521] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 16.521] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 16.521] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 16.521] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 16.521] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 16.521] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 16.521] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 16.521] (II) NVIDIA(0): Config Options in the README.
[ 16.534] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
[ 16.640] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.640] (==) NVIDIA(0): Backing store enabled
[ 16.640] (==) NVIDIA(0): Silken mouse enabled
[ 16.640] (==) NVIDIA(0): DPMS enabled
[ 16.640] (II) Loading sub module "dri2"
[ 16.640] (II) LoadModule: "dri2"
[ 16.640] (II) Module "dri2" already built-in
[ 16.640] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.640] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.640] (II) Initializing extension Generic Event Extension
[ 16.640] (II) Initializing extension SHAPE
[ 16.640] (II) Initializing extension MIT-SHM
[ 16.640] (II) Initializing extension XInputExtension
[ 16.640] (II) Initializing extension XTEST
[ 16.640] (II) Initializing extension BIG-REQUESTS
[ 16.640] (II) Initializing extension SYNC
[ 16.640] (II) Initializing extension XKEYBOARD
[ 16.640] (II) Initializing extension XC-MISC
[ 16.640] (II) Initializing extension XFIXES
[ 16.640] (II) Initializing extension RENDER
[ 16.640] (II) Initializing extension RANDR
[ 16.640] (II) Initializing extension COMPOSITE
[ 16.640] (II) Initializing extension DAMAGE
[ 16.640] (II) Initializing extension MIT-SCREEN-SAVER
[ 16.640] (II) Initializing extension DOUBLE-BUFFER
[ 16.640] (II) Initializing extension RECORD
[ 16.640] (II) Initializing extension DPMS
[ 16.640] (II) Initializing extension Present
[ 16.640] (II) Initializing extension DRI3
[ 16.640] (II) Initializing extension X-Resource
[ 16.640] (II) Initializing extension XVideo
[ 16.640] (II) Initializing extension XVideo-MotionCompensation
[ 16.640] (II) Initializing extension GLX
[ 16.640] (II) Initializing extension GLX
[ 16.640] (II) Indirect GLX disabled.
[ 16.640] (II) GLX: Another vendor is already registered for screen 0
[ 16.640] (II) Initializing extension XFree86-VidModeExtension
[ 16.640] (II) Initializing extension XFree86-DGA
[ 16.640] (II) Initializing extension XFree86-DRI
[ 16.641] (II) Initializing extension DRI2
[ 16.641] (II) Initializing extension NV-GLX
[ 16.641] (II) Initializing extension NV-CONTROL
[ 16.641] (II) Initializing extension XINERAMA
[ 16.661] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.661] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.661] (II) LoadModule: "evdev"
[ 16.661] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 16.662] (II) Module evdev: vendor="X.Org Foundation"
[ 16.662] compiled for 1.20.10, module version = 2.10.6
[ 16.662] Module class: X.Org XInput Driver
[ 16.662] ABI class: X.Org XInput driver, version 24.1
[ 16.662] (II) Using input driver 'evdev' for 'Power Button'
[ 16.662] (**) Power Button: always reports core events
[ 16.662] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.662] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.662] (--) evdev: Power Button: Found keys
[ 16.662] (II) evdev: Power Button: Configuring as keyboard
[ 16.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.662] (**) Option "xkb_rules" "evdev"
[ 16.662] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.662] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.662] (II) Using input driver 'evdev' for 'Power Button'
[ 16.662] (**) Power Button: always reports core events
[ 16.662] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.662] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.662] (--) evdev: Power Button: Found keys
[ 16.662] (II) evdev: Power Button: Configuring as keyboard
[ 16.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 16.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.662] (**) Option "xkb_rules" "evdev"
[ 16.662] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 16.662] (II) No input driver specified, ignoring this device.
[ 16.662] (II) This device may have been added with another device file.
[ 16.662] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 16.663] (II) No input driver specified, ignoring this device.
[ 16.663] (II) This device may have been added with another device file.
[ 16.663] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[ 16.663] (II) No input driver specified, ignoring this device.
[ 16.663] (II) This device may have been added with another device file.
[ 16.663] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event12)
[ 16.663] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.663] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 16.663] (**) Logitech USB Keyboard: always reports core events
[ 16.663] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event12"
[ 16.663] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 16.663] (--) evdev: Logitech USB Keyboard: Found keys
[ 16.663] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 16.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.0/0003:046D:C31C.0002/input/input12/event12"
[ 16.663] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 16.663] (**) Option "xkb_rules" "evdev"
[ 16.663] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event13)
[ 16.663] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.663] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 16.663] (**) Logitech USB Keyboard: always reports core events
[ 16.663] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event13"
[ 16.663] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 16.663] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 16.663] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 16.663] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 16.663] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 16.663] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 16.663] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 16.663] (--) evdev: Logitech USB Keyboard: Found keys
[ 16.663] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 16.663] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 16.663] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 16.663] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 16.663] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.1/0003:046D:C31C.0003/input/input13/event13"
[ 16.663] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 16.663] (**) Option "xkb_rules" "evdev"
[ 16.663] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 16.663] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 16.663] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 16.663] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 16.663] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 16.663] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 16.663] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event14)
[ 16.663] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.663] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 16.663] (**) Logitech USB Optical Mouse: always reports core events
[ 16.663] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event14"
[ 16.663] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 16.663] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 16.663] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 16.663] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 16.663] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 16.663] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 16.663] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 16.663] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.663] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-4/5-4:1.0/0003:046D:C077.0004/input/input14/event14"
[ 16.663] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[ 16.663] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 16.663] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.663] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 16.663] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 16.663] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 16.663] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event2)
[ 16.663] (II) No input driver specified, ignoring this device.
[ 16.663] (II) This device may have been added with another device file.
[ 16.663] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event3)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 16.664] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event4)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 16.664] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event5)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 16.664] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event6)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 16.664] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event7)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 16.664] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event8)
[ 16.664] (II) No input driver specified, ignoring this device.
[ 16.664] (II) This device may have been added with another device file.
[ 26.245] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 26.245] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 26.245] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 26.245] (--) NVIDIA(GPU-0):
[ 26.245] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 26.245] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 26.245] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[ 26.245] (--) NVIDIA(GPU-0):
[ 26.245] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 26.245] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 26.245] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 26.245] (--) NVIDIA(GPU-0):
[ 26.275] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): connected
[ 26.275] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): Internal TMDS
[ 26.275] (--) NVIDIA(GPU-0): BenQ V2400W (DFP-3): 600.0 MHz maximum pixel clock
[ 26.275] (--) NVIDIA(GPU-0):
[ 209.035] (II) evdev: Logitech USB Optical Mouse: Close
[ 209.035] (II) UnloadModule: "evdev"
[ 209.035] (II) evdev: Logitech USB Keyboard: Close
[ 209.035] (II) UnloadModule: "evdev"
[ 209.035] (II) evdev: Logitech USB Keyboard: Close
[ 209.035] (II) UnloadModule: "evdev"
[ 209.035] (II) evdev: Power Button: Close
[ 209.035] (II) UnloadModule: "evdev"
[ 209.035] (II) evdev: Power Button: Close
[ 209.035] (II) UnloadModule: "evdev"
[ 209.210] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 209.213] (II) Server terminated successfully (0). Closing log file. |
|
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Mon Feb 08, 2021 5:07 am Post subject: |
|
|
Re: slim
You might find lightdm more satisfactory. At least I don't find it crashing and having to restart xdm.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
DespLock
n00b
Joined: 27 Jul 2020
Posts: 65
|
| Posted: Mon Feb 08, 2021 9:00 pm Post subject: Re: XFCE4 - black screen after log-in |
|
|
[quote="Joseph_sys"][quote="DespLock"] | Joseph_sys wrote: |
[...]
But her is my /var/log/Xorg.0.log
If you see something that I could change.
[...]
|
I'm not familiar enough to say sth about nvidia drivers, but it looks ok for me. I'm using lightdm too, so maybe try this one for now and see how it goes? |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Mon Feb 08, 2021 9:12 pm Post subject: |
|
|
Maybe add modesetting to the VIDEO_CARDS line in make.conf.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
Joseph_sys
Advocate
Joined: 08 Jun 2004
Posts: 2712
Location: Edmonton, AB
|
| Posted: Tue Feb 09, 2021 12:47 am Post subject: |
|
|
| figueroa wrote: | Re: slim
You might find lightdm more satisfactory. At least I don't find it crashing and having to restart xdm. |
I just compiled and activated lightdm and it keeps looping when I try to login.
Here is the log. I don't have luck with these graphical login display :-/
| Code: | /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=2480
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.00s] DEBUG: Monitoring logind for seats
[+0.00s] DEBUG: New seat added from logind: seat0
[+0.00s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.00s] DEBUG: Seat seat0: Starting
[+0.00s] DEBUG: Seat seat0: Creating greeter session
[+0.00s] DEBUG: Seat seat0: Creating display server of type x
[+0.00s] DEBUG: posix_spawn avoided (fd close requested)
[+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.00s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+0.00s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+0.00s] DEBUG: XServer 0: Launching X Server
[+0.00s] DEBUG: Launching process 2496: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.00s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.00s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.04s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.04s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+0.05s] DEBUG: User /org/freedesktop/Accounts/User1001 added
[+0.05s] DEBUG: posix_spawn avoided (automatic reaping requested) (fd close requested)
[+0.83s] DEBUG: Got signal 10 from process 2496
[+0.83s] DEBUG: XServer 0: Got signal from X server :0
[+0.83s] DEBUG: XServer 0: Connecting to XServer :0
[+0.83s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+0.83s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+0.83s] DEBUG: Session pid=2557: Started with service 'lightdm-greeter', username 'root'
[+0.84s] DEBUG: Session pid=2557: Authentication complete with return value 0: Success
[+0.84s] DEBUG: Seat seat0: Session authenticated, running command
[+0.84s] DEBUG: Session pid=2557: Running command /usr/sbin/lightdm-gtk-greeter
[+0.84s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+0.84s] DEBUG: Session pid=2557: Logging to /var/log/lightdm/seat0-greeter.log
[+0.84s] DEBUG: Activating VT 7
[+0.84s] DEBUG: Activating login1 session 1
[+0.84s] DEBUG: Seat seat0 changes active session to 1
[+0.84s] DEBUG: Session 1 is already active
[+0.91s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+1.38s] DEBUG: Greeter start authentication for fd
[+1.39s] DEBUG: Session pid=2585: Started with service 'lightdm', username 'fd'
[+1.39s] DEBUG: Session pid=2585: Got 1 message(s) from PAM
[+1.39s] DEBUG: Prompt greeter with 1 message(s)
[+40.38s] DEBUG: Continue authentication
[+40.39s] DEBUG: Session pid=2585: Authentication complete with return value 0: Success
[+40.39s] DEBUG: Authenticate result for user fd: Success
[+40.39s] DEBUG: User fd authorized
[+40.39s] DEBUG: Greeter sets language en_US.utf8
[+40.40s] DEBUG: Writing /home/fd/.dmrc
[+40.42s] DEBUG: Greeter requests session Xsession
[+40.43s] DEBUG: Writing /home/fd/.dmrc
[+40.44s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+40.44s] DEBUG: Terminating login1 session 1
[+40.44s] DEBUG: Session pid=2557: Sending SIGTERM
[+40.44s] DEBUG: Seat seat0 changes active session to
[+40.45s] DEBUG: Greeter closed communication channel
[+40.45s] DEBUG: Session pid=2557: Exited with return value 0
[+40.45s] DEBUG: Seat seat0: Session stopped
[+40.45s] DEBUG: Seat seat0: Greeter stopped, running session
[+40.45s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+40.45s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+40.46s] DEBUG: Session pid=2585: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+40.46s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+40.46s] DEBUG: Session pid=2585: Logging to .xsession-errors
[+40.46s] DEBUG: Activating VT 7
[+40.46s] DEBUG: Activating login1 session 2
[+40.46s] DEBUG: Seat seat0 changes active session to 2
[+40.46s] DEBUG: Session 2 is already active
[+40.52s] DEBUG: Session pid=2585: Exited with return value 127
[+40.52s] DEBUG: Seat seat0: Session stopped
[+40.52s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+40.52s] DEBUG: Sending signal 15 to process 2496
[+40.52s] DEBUG: Seat seat0 changes active session to
[+40.75s] DEBUG: Process 2496 exited with return value 0
[+40.75s] DEBUG: XServer 0: X server stopped
[+40.75s] DEBUG: Releasing VT 7
[+40.75s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0
[+40.75s] DEBUG: Seat seat0: Display server stopped
[+40.75s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+40.75s] DEBUG: Seat seat0: Creating greeter session
[+40.75s] DEBUG: Seat seat0: Creating display server of type x
[+40.75s] DEBUG: Using VT 7
[+40.75s] DEBUG: Seat seat0: Starting local X display on VT 7
[+40.75s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+40.75s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+40.75s] DEBUG: XServer 0: Launching X Server
[+40.75s] DEBUG: Launching process 2693: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+40.75s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+41.48s] DEBUG: Got signal 10 from process 2693
[+41.48s] DEBUG: XServer 0: Got signal from X server :0
[+41.48s] DEBUG: XServer 0: Connecting to XServer :0
[+41.48s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+41.48s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+41.48s] DEBUG: Session pid=2700: Started with service 'lightdm-greeter', username 'root'
[+41.48s] DEBUG: Session pid=2700: Authentication complete with return value 0: Success
[+41.48s] DEBUG: Seat seat0: Session authenticated, running command
[+41.48s] DEBUG: Session pid=2700: Running command /usr/sbin/lightdm-gtk-greeter
[+41.48s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+41.48s] DEBUG: Session pid=2700: Logging to /var/log/lightdm/seat0-greeter.log
[+41.48s] DEBUG: Activating VT 7
[+41.48s] DEBUG: Activating login1 session 3
[+41.48s] DEBUG: Seat seat0 changes active session to 3
[+41.48s] DEBUG: Session 3 is already active
[+41.53s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+42.01s] DEBUG: Greeter start authentication for fd
[+42.01s] DEBUG: Session pid=2733: Started with service 'lightdm', username 'fd'
[+42.01s] DEBUG: Session pid=2733: Got 1 message(s) from PAM
[+42.01s] DEBUG: Prompt greeter with 1 message(s)
[+58.85s] DEBUG: Continue authentication
[+58.86s] DEBUG: Session pid=2733: Authentication complete with return value 0: Success
[+58.86s] DEBUG: Authenticate result for user fd: Success
[+58.86s] DEBUG: User fd authorized
[+58.87s] DEBUG: Greeter sets language en_US.utf8
[+58.90s] DEBUG: Greeter requests session Xsession
[+58.90s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+58.90s] DEBUG: Terminating login1 session 3
[+58.90s] DEBUG: Session pid=2700: Sending SIGTERM
[+58.90s] DEBUG: Seat seat0 changes active session to
[+58.92s] DEBUG: Greeter closed communication channel
[+58.92s] DEBUG: Session pid=2700: Exited with return value 0
[+58.92s] DEBUG: Seat seat0: Session stopped
[+58.92s] DEBUG: Seat seat0: Greeter stopped, running session
[+58.92s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1
[+58.92s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+58.92s] DEBUG: Session pid=2733: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+58.92s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+58.92s] DEBUG: Session pid=2733: Logging to .xsession-errors
[+58.92s] DEBUG: Activating VT 7
[+58.92s] DEBUG: Activating login1 session 4
[+58.92s] DEBUG: Seat seat0 changes active session to 4
[+58.92s] DEBUG: Session 4 is already active
[+58.96s] DEBUG: Session pid=2733: Exited with return value 127
[+58.96s] DEBUG: Seat seat0: Session stopped
[+58.96s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+58.96s] DEBUG: Sending signal 15 to process 2693
[+58.96s] DEBUG: Seat seat0 changes active session to
[+59.22s] DEBUG: Process 2693 exited with return value 0
[+59.22s] DEBUG: XServer 0: X server stopped
[+59.22s] DEBUG: Releasing VT 7
[+59.22s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0
[+59.22s] DEBUG: Seat seat0: Display server stopped
[+59.22s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+59.22s] DEBUG: Seat seat0: Creating greeter session
[+59.22s] DEBUG: Seat seat0: Creating display server of type x
[+59.22s] DEBUG: Using VT 7
[+59.22s] DEBUG: Seat seat0: Starting local X display on VT 7
[+59.22s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+59.22s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+59.22s] DEBUG: XServer 0: Launching X Server
[+59.22s] DEBUG: Launching process 2794: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+59.22s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+59.93s] DEBUG: Got signal 10 from process 2794
[+59.93s] DEBUG: XServer 0: Got signal from X server :0
[+59.93s] DEBUG: XServer 0: Connecting to XServer :0
[+59.93s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+59.93s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+59.93s] DEBUG: Session pid=2801: Started with service 'lightdm-greeter', username 'root'
[+59.94s] DEBUG: Session pid=2801: Authentication complete with return value 0: Success
[+59.94s] DEBUG: Seat seat0: Session authenticated, running command
[+59.94s] DEBUG: Session pid=2801: Running command /usr/sbin/lightdm-gtk-greeter
[+59.94s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+59.94s] DEBUG: Session pid=2801: Logging to /var/log/lightdm/seat0-greeter.log
[+59.94s] DEBUG: Activating VT 7
[+59.94s] DEBUG: Activating login1 session 5
[+59.94s] DEBUG: Seat seat0 changes active session to 5
[+59.94s] DEBUG: Session 5 is already active
[+59.99s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+60.47s] DEBUG: Greeter start authentication for fd
[+60.47s] DEBUG: Session pid=2829: Started with service 'lightdm', username 'fd'
[+60.47s] DEBUG: Session pid=2829: Got 1 message(s) from PAM
[+60.47s] DEBUG: Prompt greeter with 1 message(s)
[+81.77s] DEBUG: Continue authentication
[+81.78s] DEBUG: Session pid=2829: Authentication complete with return value 0: Success
[+81.78s] DEBUG: Authenticate result for user fd: Success
[+81.78s] DEBUG: User fd authorized
[+81.79s] DEBUG: Greeter sets language en_US.utf8
[+81.82s] DEBUG: Greeter requests session Xsession
[+81.82s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+81.82s] DEBUG: Terminating login1 session 5
[+81.82s] DEBUG: Session pid=2801: Sending SIGTERM
[+81.82s] DEBUG: Seat seat0 changes active session to
[+81.84s] DEBUG: Greeter closed communication channel
[+81.84s] DEBUG: Session pid=2801: Exited with return value 0
[+81.84s] DEBUG: Seat seat0: Session stopped
[+81.84s] DEBUG: Seat seat0: Greeter stopped, running session
[+81.84s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session2
[+81.84s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+81.84s] DEBUG: Session pid=2829: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+81.84s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+81.84s] DEBUG: Session pid=2829: Logging to .xsession-errors
[+81.84s] DEBUG: Activating VT 7
[+81.84s] DEBUG: Activating login1 session 6
[+81.84s] DEBUG: Seat seat0 changes active session to 6
[+81.84s] DEBUG: Session 6 is already active
[+81.88s] DEBUG: Session pid=2829: Exited with return value 127
[+81.88s] DEBUG: Seat seat0: Session stopped
[+81.88s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+81.88s] DEBUG: Sending signal 15 to process 2794
[+81.88s] DEBUG: Seat seat0 changes active session to
[+82.12s] DEBUG: Process 2794 exited with return value 0
[+82.12s] DEBUG: XServer 0: X server stopped
[+82.12s] DEBUG: Releasing VT 7
[+82.12s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0
[+82.12s] DEBUG: Seat seat0: Display server stopped
[+82.12s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+82.12s] DEBUG: Seat seat0: Creating greeter session
[+82.12s] DEBUG: Seat seat0: Creating display server of type x
[+82.12s] DEBUG: Using VT 7
[+82.12s] DEBUG: Seat seat0: Starting local X display on VT 7
[+82.12s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+82.12s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+82.12s] DEBUG: XServer 0: Launching X Server
[+82.12s] DEBUG: Launching process 2903: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+82.12s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+82.84s] DEBUG: Got signal 10 from process 2903
[+82.84s] DEBUG: XServer 0: Got signal from X server :0
[+82.84s] DEBUG: XServer 0: Connecting to XServer :0
[+82.84s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+82.84s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+82.84s] DEBUG: Session pid=2910: Started with service 'lightdm-greeter', username 'root'
[+82.84s] DEBUG: Session pid=2910: Authentication complete with return value 0: Success
[+82.84s] DEBUG: Seat seat0: Session authenticated, running command
[+82.84s] DEBUG: Session pid=2910: Running command /usr/sbin/lightdm-gtk-greeter
[+82.84s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+82.84s] DEBUG: Session pid=2910: Logging to /var/log/lightdm/seat0-greeter.log
[+82.85s] DEBUG: Activating VT 7
[+82.85s] DEBUG: Activating login1 session 7
[+82.85s] DEBUG: Seat seat0 changes active session to 7
[+82.85s] DEBUG: Session 7 is already active
[+82.89s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+83.37s] DEBUG: Greeter start authentication for fd
[+83.37s] DEBUG: Session pid=2938: Started with service 'lightdm', username 'fd'
[+83.37s] DEBUG: Session pid=2938: Got 1 message(s) from PAM
[+83.37s] DEBUG: Prompt greeter with 1 message(s)
[+109.21s] DEBUG: Continue authentication
[+109.21s] DEBUG: Session pid=2938: Authentication complete with return value 0: Success
[+109.21s] DEBUG: Authenticate result for user fd: Success
[+109.21s] DEBUG: User fd authorized
[+109.21s] DEBUG: Greeter sets language en_US.utf8
[+109.25s] DEBUG: Greeter requests session Xsession
[+109.25s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+109.25s] DEBUG: Terminating login1 session 7
[+109.25s] DEBUG: Session pid=2910: Sending SIGTERM
[+109.25s] DEBUG: Seat seat0 changes active session to
[+109.26s] DEBUG: Greeter closed communication channel
[+109.26s] DEBUG: Session pid=2910: Exited with return value 0
[+109.26s] DEBUG: Seat seat0: Session stopped
[+109.26s] DEBUG: Seat seat0: Greeter stopped, running session
[+109.26s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session3
[+109.26s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+109.26s] DEBUG: Session pid=2938: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+109.26s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+109.26s] DEBUG: Session pid=2938: Logging to .xsession-errors
[+109.26s] DEBUG: Activating VT 7
[+109.26s] DEBUG: Activating login1 session 8
[+109.26s] DEBUG: Seat seat0 changes active session to 8
[+109.26s] DEBUG: Session 8 is already active
[+109.31s] DEBUG: Session pid=2938: Exited with return value 127
[+109.31s] DEBUG: Seat seat0: Session stopped
[+109.31s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+109.31s] DEBUG: Sending signal 15 to process 2903
[+109.31s] DEBUG: Seat seat0 changes active session to
[+109.56s] DEBUG: Process 2903 exited with return value 0
[+109.56s] DEBUG: XServer 0: X server stopped
[+109.56s] DEBUG: Releasing VT 7
[+109.56s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0
[+109.56s] DEBUG: Seat seat0: Display server stopped
[+109.56s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+109.56s] DEBUG: Seat seat0: Creating greeter session
[+109.56s] DEBUG: Seat seat0: Creating display server of type x
[+109.56s] DEBUG: Using VT 7
[+109.56s] DEBUG: Seat seat0: Starting local X display on VT 7
[+109.56s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+109.56s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+109.56s] DEBUG: XServer 0: Launching X Server
[+109.56s] DEBUG: Launching process 3018: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+109.56s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+110.28s] DEBUG: Got signal 10 from process 3018
[+110.28s] DEBUG: XServer 0: Got signal from X server :0
[+110.28s] DEBUG: XServer 0: Connecting to XServer :0
[+110.28s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+110.28s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+110.28s] DEBUG: Session pid=3025: Started with service 'lightdm-greeter', username 'root'
[+110.29s] DEBUG: Session pid=3025: Authentication complete with return value 0: Success
[+110.29s] DEBUG: Seat seat0: Session authenticated, running command
[+110.29s] DEBUG: Session pid=3025: Running command /usr/sbin/lightdm-gtk-greeter
[+110.29s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+110.29s] DEBUG: Session pid=3025: Logging to /var/log/lightdm/seat0-greeter.log
[+110.29s] DEBUG: Activating VT 7
[+110.29s] DEBUG: Activating login1 session 9
[+110.29s] DEBUG: Seat seat0 changes active session to 9
[+110.29s] DEBUG: Session 9 is already active
[+110.33s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+110.81s] DEBUG: Greeter start authentication for fd
[+110.81s] DEBUG: Session pid=3057: Started with service 'lightdm', username 'fd'
[+110.81s] DEBUG: Session pid=3057: Got 1 message(s) from PAM
[+110.81s] DEBUG: Prompt greeter with 1 message(s)
[+491.60s] DEBUG: Greeter start authentication for thelma
[+491.60s] DEBUG: Session pid=3057: Sending SIGTERM
[+491.60s] DEBUG: Session pid=3804: Started with service 'lightdm', username 'thelma'
[+491.60s] DEBUG: Session pid=3057: Terminated with signal 15
[+491.60s] DEBUG: Session: Failed during authentication
[+491.60s] DEBUG: Seat seat0: Session stopped
[+491.60s] DEBUG: Session pid=3804: Got 1 message(s) from PAM
[+491.60s] DEBUG: Prompt greeter with 1 message(s)
[+499.37s] DEBUG: Continue authentication
[+501.59s] DEBUG: Session pid=3804: Authentication complete with return value 6: Permission denied
[+501.59s] DEBUG: Authenticate result for user thelma: Permission denied
[+501.59s] DEBUG: Session pid=3804: Exited with return value 1
[+501.59s] DEBUG: Seat seat0: Session stopped
[+501.61s] DEBUG: Greeter start authentication for thelma
[+501.61s] DEBUG: Session pid=3825: Started with service 'lightdm', username 'thelma'
[+501.61s] DEBUG: Session pid=3825: Got 1 message(s) from PAM
[+501.61s] DEBUG: Prompt greeter with 1 message(s)
[+509.13s] DEBUG: Greeter start authentication for fd
[+509.13s] DEBUG: Session pid=3825: Sending SIGTERM
[+509.13s] DEBUG: Session pid=3842: Started with service 'lightdm', username 'fd'
[+509.13s] DEBUG: Session pid=3825: Terminated with signal 15
[+509.13s] DEBUG: Session: Failed during authentication
[+509.13s] DEBUG: Seat seat0: Session stopped
[+509.13s] DEBUG: Session pid=3842: Got 1 message(s) from PAM
[+509.13s] DEBUG: Prompt greeter with 1 message(s)
[+514.26s] DEBUG: Continue authentication
[+514.27s] DEBUG: Session pid=3842: Authentication complete with return value 0: Success
[+514.27s] DEBUG: Authenticate result for user fd: Success
[+514.27s] DEBUG: User fd authorized
[+514.28s] DEBUG: Greeter sets language en_US.utf8
[+514.30s] DEBUG: Greeter requests session Xsession
[+514.30s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+514.30s] DEBUG: Terminating login1 session 9
[+514.30s] DEBUG: Session pid=3025: Sending SIGTERM
[+514.30s] DEBUG: Seat seat0 changes active session to
[+514.32s] DEBUG: Greeter closed communication channel
[+514.32s] DEBUG: Session pid=3025: Exited with return value 0
[+514.32s] DEBUG: Seat seat0: Session stopped
[+514.32s] DEBUG: Seat seat0: Greeter stopped, running session
[+514.32s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session4
[+514.32s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+514.32s] DEBUG: Session pid=3842: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+514.32s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+514.32s] DEBUG: Session pid=3842: Logging to .xsession-errors
[+514.32s] DEBUG: Activating VT 7
[+514.32s] DEBUG: Activating login1 session 11
[+514.32s] DEBUG: Seat seat0 changes active session to 11
[+514.32s] DEBUG: Session 11 is already active
[+514.36s] DEBUG: Session pid=3842: Exited with return value 127
[+514.36s] DEBUG: Seat seat0: Session stopped
[+514.36s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+514.36s] DEBUG: Sending signal 15 to process 3018
[+514.36s] DEBUG: Seat seat0 changes active session to
[+514.60s] DEBUG: Process 3018 exited with return value 0
[+514.60s] DEBUG: XServer 0: X server stopped
[+514.60s] DEBUG: Releasing VT 7
[+514.60s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0
[+514.60s] DEBUG: Seat seat0: Display server stopped
[+514.60s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+514.60s] DEBUG: Seat seat0: Creating greeter session
[+514.60s] DEBUG: Seat seat0: Creating display server of type x
[+514.60s] DEBUG: Using VT 7
[+514.60s] DEBUG: Seat seat0: Starting local X display on VT 7
[+514.60s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+514.60s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+514.60s] DEBUG: XServer 0: Launching X Server
[+514.60s] DEBUG: Launching process 3872: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+514.60s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+515.32s] DEBUG: Got signal 10 from process 3872
[+515.32s] DEBUG: XServer 0: Got signal from X server :0
[+515.32s] DEBUG: XServer 0: Connecting to XServer :0
[+515.32s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+515.32s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+515.32s] DEBUG: Session pid=3883: Started with service 'lightdm-greeter', username 'root'
[+515.33s] DEBUG: Session pid=3883: Authentication complete with return value 0: Success
[+515.33s] DEBUG: Seat seat0: Session authenticated, running command
[+515.33s] DEBUG: Session pid=3883: Running command /usr/sbin/lightdm-gtk-greeter
[+515.33s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+515.33s] DEBUG: Session pid=3883: Logging to /var/log/lightdm/seat0-greeter.log
[+515.33s] DEBUG: Activating VT 7
[+515.33s] DEBUG: Activating login1 session 12
[+515.33s] DEBUG: Seat seat0 changes active session to 12
[+515.33s] DEBUG: Session 12 is already active
[+515.37s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+515.86s] DEBUG: Greeter start authentication for fd
[+515.86s] DEBUG: Session pid=3911: Started with service 'lightdm', username 'fd'
[+515.86s] DEBUG: Session pid=3911: Got 1 message(s) from PAM
[+515.86s] DEBUG: Prompt greeter with 1 message(s) |
|
|
| Back to top |
|
|
DespLock
n00b
Joined: 27 Jul 2020
Posts: 65
|
| Posted: Tue Feb 09, 2021 9:11 pm Post subject: |
|
|
There is the culprit:
| Quote: |
[+40.45s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+40.45s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+40.46s] DEBUG: Session pid=2585: Running command /etc/lightdm/Xsession /etc/X11/Sessions/Xsession
[+40.46s] DEBUG: Creating shared data directory /var/lib/lightdm-data/fd
[+40.46s] DEBUG: Session pid=2585: Logging to .xsession-errors
[+40.46s] DEBUG: Activating VT 7
[+40.46s] DEBUG: Activating login1 session 2
[+40.46s] DEBUG: Seat seat0 changes active session to 2
[+40.46s] DEBUG: Session 2 is already active
[+40.52s] DEBUG: Session pid=2585: Exited with return value 127
[+40.52s] DEBUG: Seat seat0: Session stopped
[+40.52s] DEBUG: Seat seat0: Stopping display server, no sessions require it
|
Is dbus running?
from https://wiki.gentoo.org/wiki/LightDM
| Quote: |
dbus is necessary because LightDM depends on it to pass messages:
| Code: |
rc-service dbus start
|
|
Else show us the content of .xsession-errors pls. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3005
Location: Edge of marsh USA
|
| Posted: Tue Feb 09, 2021 10:19 pm Post subject: |
|
|
xdm launches dbus.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
DespLock
n00b
Joined: 27 Jul 2020
Posts: 65
|
| Posted: Wed Feb 10, 2021 8:05 am Post subject: |
|
|
| Quote: |
So for now I'm starting X from .xinitrc
|
Not sure if that has changed. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
