| View previous topic :: View next topic |
| Author |
Message |
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
 Posted: Tue Dec 09, 2003 6:11 am Post subject: Getting portage running under Solaris 9 (Portaris!) |
 |
|
Well, my first steps in getting portage going under solaris are beginning to look promising. After copying the site-packages, putting a static link from /usr/local/bin/python to /usr/bin/python. I finally got emerge to run without dumping python source to the screen and complaining about modules. Even linking libm.so.6 to libm.so.1.
I got this:
| Code: |
bash-2.05# ./emerge sync
!!! CANNOT IMPORT FTPLIB: ld.so.1: /usr/bin/python: fatal: libc.so.6: open failed: No such file or directory
Operating system "SunOS" currently unsupported. Exiting
|
So I linked libc.so.1 to libc.so.6 and got this:
| Code: |
bash-2.05# ./emerge
!!! CANNOT IMPORT FTPLIB: No module named _socket
Operating system "SunOS" currently unsupported. Exiting.
bash-2.05#
|
So I looked for that file in my stage1 dir that I untarred into:
| Code: | bash-2.05# file /gentoo/usr/lib/python2.2/lib-dynload/_socket.so
/gentoo/usr/lib/python2.2/lib-dynload/_socket.so: ELF 32-bit MSB dynamic lib SPARC Version 1, dynamically linked, not stripped
|
If it is not part of python, where can I get this? Currently I am using the following sunfreeware packages:
| Code: |
9_Recommended
bzip2-1.0.2-sol9-sparc-local
findutils-4.1-sol9-sparc-local
make-3.80-sol9-sparc-local
python-2.2.2-sol9-sparc-local
coreutils-4.5.4-sol9-sparc-local
gawk-3.1.1-sol9-sparc-local
rsync-2.5.6-sol9-sparc-local
autoconf-2.57-sol9-sparc-local
cvs-1.11.5-sol9-sparc-local
sed-4.0-sol9-sparc-local
automake-1.7.2-sol9-sparc-local
diffutils-2.8.1-sol9-sparc-local
wget-1.8.2-sol9-sparc-local
bison-1.875-sol9-sparc-local
fileutils-4.1-sol9-sparc-local
gzip-1.3.5-sol9-sparc-local
|
Can you see anything off-hand that might be needed?
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Sat May 15, 2004 11:56 pm; edited 4 times in total |
|
| Back to top |
|
 |
Genone
Retired Dev
Joined: 14 Mar 2003
Posts: 9615
Location: beyond the rim
|
| Posted: Tue Dec 09, 2003 7:07 am Post subject: |
|
|
According to portage that file belongs to python  |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Tue Dec 09, 2003 7:11 am Post subject: |
|
|
Looks like a bad distro of Python on Sunfreeware. I sent them an e-mail about it and am going to compile python myself and see if I can proceed.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Thu Dec 11, 2003 7:09 am Post subject: |
|
|
Ok a few new things. I did a clean reinstall of Solaris9 on to another drive with developer support because I found out that gcc couldn't compile because I didn't include developer support. Also I am only using 2 binary packages from sunfreeware, GCC and Bash. I'm going to try to do everything from source. 
I downloaded latest stable sources from Python.org. However it gives an error during the untarring. I tried compiling anyway but it wouldn't complete. So did an emerge -f python on my gentoo system and copied the file over to my Sun it compiled without a hitch.
Emerge runs now with just the SunOS error above. I need to find out where it is determining that and then modify it to make it continue. Anyone feel free to chime in as I'm working on this, because I'm basically doing it w/o any docs. 
I did find I needed to add /usr/ccs/bin to my path to give access to a few more things such as "ar"
| Code: | bash-2.05# export
declare -x HOME="/"
declare -x HOSTNAME="Fusion"
declare -x HOSTTYPE="sparc"
declare -x HZ=""
declare -x LD_LIBRARY_PATH="/usr/local/lib/sparcv9"
declare -x LIBRARY_PATH="/usr/local/lib/sparcv9"
declare -x LOGNAME="root"
declare -x MACHTYPE="sparc-sun-solaris2.9"
declare -x OLDPWD="/export/home/root"
declare -x OSTYPE="solaris2.9"
declare -x PATH="/usr/sbin:/usr/bin:/usr/local/bin:/usr/ccs/bin"
declare -x PWD="/export/home/root/ncurses-5.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x TERM="xterm"
declare -x TZ="US/Central"
|
Originally when I compiled Python, I used
| Code: | -DNDEBUG -m64 -g -O3 -pipe -fomit-frame-pointer -mcpu=ultrasparc
-mtune=ultrasparc -Wall -Wstrict-prototypes
|
But the -m64 flag causes this:
| Code: | gcc -c -DNDEBUG -m64 -g -O3 -pipe -fomit-frame-pointer -mcpu=ultrasparc -mtune=ultrasparc -Wall -Wstrict-prototypes -I. -I./Include -DHAVE_CONFIG_H -o Modules/python.o Modules/python.c
In file included from Include/Python.h:62,
from Modules/python.c:3:
Include/pyport.h:480:2: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
make: *** [Modules/python.o] Error 1 |
I tried :
| Code: | LD_LIBRARY_PATH="/usr/local/lib/sparcv9"
LIBRARY_PATH="/usr/local/lib/sparcv9" |
and
| Code: | LD_LIBRARY_PATH="/usr/local/lib"
LIBRARY_PATH="/usr/local/lib" |
But both gave the same error, so I removed -m64 and it seems to compile fine using the non-sparcv9 libs.
Eventually I plan to move /usr/local/bin ahead of /usr/bin when I get enough stuff in there to work by itself since solaris9 already has a lot of good stuff in /usr/bin.
I hope the powers that be don't mind me making my notes in this thread..
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Sat Dec 13, 2003 8:53 am; edited 1 time in total |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Thu Dec 11, 2003 8:15 am Post subject: |
|
|
Ok, I cheated in portage.py and replaced Linux with SunOS. Now it complains about libc.so.6 is missing, so I linked libc.so.1 to libc.so.6
| Code: | bash-2.05# ./emerge
Traceback (most recent call last):
File "./emerge", line 14, in ?
import portage
File "/usr/local/lib/python2.2/site-packages/portage.py", line 125, in ?
import missingos
ImportError: ld.so.1: /usr/bin/python: fatal: libc.so.6: version `GLIBC_2.0' not found (required by file /usr/local/lib/python2.2/site-packages/missingos.so)
bash-2.05#
|
Looks like I need to try to get glibc to work or recompile the missingos.so file using the solaris libs.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 13, 2003 6:50 am Post subject: |
|
|
Well today's latest...
| Code: | bash-2.05# gcc missingos.c -I /usr/local/include/python2.2/
Undefined first referenced
symbol in file
main /usr/local/lib/gcc-lib/sparc-sun-solaris2.9/3.3/crt1.o
PyErr_SetString /var/tmp//cccfiJio.o
Py_InitModule4 /var/tmp//cccfiJio.o
PyErr_SetFromErrnoWithFilename /var/tmp//cccfiJio.o
PyArg_ParseTuple /var/tmp//cccfiJio.o
PyMem_Free /var/tmp//cccfiJio.o
_Py_NoneStruct /var/tmp//cccfiJio.o
Py_FileSystemDefaultEncoding /var/tmp//cccfiJio.o
PyExc_OSError /var/tmp//cccfiJio.o
PyExc_ValueError /var/tmp//cccfiJio.o
ld: fatal: Symbol referencing errors. No output written to a.out
collect2: ld returned 1 exit status
bash-2.05#
|
I'm trying to compile stuff in the portage source directories. I need missingos.so to continue.
This is a challenge but I think it will be worth it if I get it working.
Update, I got it to compile
| Code: | gcc -DNDEBUG -fPIC -I/usr/local/include/python2.2 -c missingos.c -o missingos.o
gcc -shared missingos.o -o missingos.so |
Rsync was not installed in solaris, so I tried to build it from the gentoo source but it failed. I then installed the binary from sunfreeware.com
I tried emerging again, and it failed on libpopt.so.0 so that gets downloaded from a gentoo mirror.
Libpopt needs gettext, so another download. Gettext complained during compile that it needed ar so I added /usr/ccs/bin to my path.
Gettext installed fine now. Back to compiling libpopt. It failed saying that it couldn't find gettext even though it was in the path, so I edited the configure script and commented out the check for it.
| Code: |
gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -Wall -g -O2 -c `test -f 'test1.c' || echo './'`test1.c
/bin/bash ./libtool --mode=link gcc -Wall -g -O2 -o test1 -all-static test1.o libpopt.la -L/usr/ucblib -R /usr/ucblib
gcc -Wall -g -O2 -o test1 -static test1.o ./.libs/libpopt.a -L/usr/ucblib -R/usr/ucblib
Undefined first referenced
symbol in file
libintl_dgettext ./.libs/libpopt.a(popt.o)
ld: fatal: Symbol referencing errors. No output written to test1
collect2: ld returned 1 exit status
make[2]: *** [test1] Error 1
make[2]: Leaving directory `/export/home/root/popt-1.7'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/export/home/root/popt-1.7'
make: *** [all] Error 2 |
Ok, I'm giving up on this one, back to Sunfreeware.com for popt.
Something looks good to me!!!
| Code: |
bash-2.05#pwd
/export/home/root/gentoo/usr/bin
bash-2.05# ./emerge sync
!!! INVALID ACCEPT_KEYWORDS: sparc
>>> starting rsync with rsync://rsync.gentoo.org/gentoo-portage...
This is rsync2.us.gentoo.org, located in Florida, USA.
Contact: sandymac@gentoo.org
receiving file list ...
|
It is still downloading but so far:
| Code: |
bash-2.05# pwd
/usr/local/portage
bash-2.05# ls
app-admin app-sci dev-ml games-kids
app-arch app-shells dev-perl games-misc
app-benchmarks app-text dev-php games-mud
app-cdr app-vim dev-python games-puzzle
app-crypt app-xemacs dev-ruby games-roguelike
app-dicts dev-ada dev-tcltk games-rpg
app-doc dev-cpp dev-tex games-server
app-editors dev-db dev-util games-simulation
app-emacs dev-dotnet eclass games-sports
app-emulation dev-embedded fresco-base games-strategy
app-gnustep dev-games games-action games-util
app-i18n dev-haskell games-arcade gnome-base
app-misc dev-java games-board profiles
app-office dev-lang games-emulation
app-pda dev-libs games-engines
app-portage dev-lisp games-fps
bash-2.05# |
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 13, 2003 8:52 am Post subject: |
|
|
Well it looks like the emerge sync went into my make.profile directory and removed the files that I created, so I copied the sparc64 files into my root directory and linked to them. I changed the chost to match the current setting. I'll have to figure out some way to permanently mask the kernels. I guess that I'm going to need a solaris architecture because I can't keep using sparc because it will assume linux.
Now the next stumbling block
| Code: | bash-2.05# ./emerge -p wget
These are the packages that I would merge, in order:
aux_get(): (0) Error in net-misc/wget-1.8.2-r3 ebuild.
Check for syntax error or corruption in the ebuild. (--debug)
Calculating dependencies
!!! all ebuilds that could satisfy "wget" have been masked.
!!! Error calculating dependencies. Please correct.
bash-2.05# ./emerge -p lynx
These are the packages that I would merge, in order:
aux_get(): (0) Error in net-www/lynx-2.8.4.1c ebuild.
Check for syntax error or corruption in the ebuild. (--debug)
Calculating dependencies
!!! all ebuilds that could satisfy "lynx" have been masked.
!!! Error calculating dependencies. Please correct.
bash-2.05# |
Doing an emerge -debug told me some files were missing, so I copied over ebuild.sh and another file that I forget.
Moving along:
| Code: | bash-2.05# ./emerge --debug -p bash
These are the packages that I would merge, in order:
Calculating dependencies
Parent: None
Depstring: app-shells/bash
Candidates: ['app-shells/bash']
/usr/sbin/ebuild.sh: /proc/self/fd/1: Permission denied
flag-o-matic
/usr/sbin/ebuild.sh: /proc/self/fd/1: Permission denied
gnuconfig
mkdir: usage: mkdir [-m mode] [-p] dirname ...
install: mkdir -m4775 failed
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//app-shells/bash-2.05a-r3: No such file or directory
aux_get(): (1) Error in app-shells/bash-2.05a-r3 ebuild.
Check for syntax error or corruption in the ebuild. (--debug)
!!! all ebuilds that could satisfy "bash" have been masked.
!!! Error calculating dependencies. Please correct.
bash-2.05# |
I think that the way solaris mkdir works is different from the linux one.
I manually created the dir and I got a screen full of errors related to /proc/self/fd/1. I tried to create that manually but it complained that the operation was not applicable.
The offending piece of code in the ebuild.sh file is:
| Code: | # All the TTY checks really only help out depend. Which is nice.
# Logging kills all this anyway. Everything becomes a pipe. --NJ
for x in "$@"; do
if [ "${x}" == "${me}" ]; then
if [ -r /proc/self/fd/1 ]; then
tty --quiet < /proc/self/fd/1 || echo "${x}"
elif [ -r /dev/fd/1 ]; then
echo "/dev/fd/1" >&2
tty --quiet < /dev/fd/1 || echo "${x}"
elif [ -r /dev/stdout ]; then
echo "/dev/stdout" >&2
tty --quiet < /dev/stdout || echo "${x}"
else
echo "${x}"
fi
return 0
fi |
I think that's all I'm going to do tonight. Can somone give me an idea of that the above piece of code is trying to do?
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 13, 2003 10:04 am Post subject: |
|
|
Nope, I couldn't wait. Since it said some things were masked, I changed the keywords and modified the path to use the mkdir in /usr/local/bin.
| Code: | bash-2.05# echo $PATH
/usr/sbin:/usr/bin:/usr/local/bin
bash-2.05# export PATH=/usr/local/bin:/usr/sbin:/usr/bin:/usr/ccs/bin
bash-2.05# ACCEPT_KEYWORDS="~sparc" ./emerge --debug -p bash
These are the packages that I would merge, in order:
Calculating dependencies
Parent: None
Depstring: app-shells/bash
Candidates: ['app-shells/bash']
ebuild: app-shells/bash-2.05b-r8
binpkg: None \
Parent: ebuild / app-shells/bash-2.05b-r8 merge
Depstring: >=sys-libs/ncurses-5.2-r2 !bootstrap? ( sys-devel/patch ) sys-devel/g
nuconfig !bootstrap? ( sys-devel/libtool ) >=sys-libs/ncurses-5.2-r2
Candidates: ['sys-devel/gnuconfig', 'sys-devel/libtool', '>=sys-libs/ncurses-5.2
-r2', 'sys-devel/patch']
mkdir: usage: mkdir [-m mode] [-p] dirname ...
install: mkdir -m4775 failed
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
/usr/sbin/ebuild.sh: /var/cache/edb/dep//sys-devel/gnuconfig-20030708: No such f
ile or directory
aux_get(): (1) Error in sys-devel/gnuconfig-20030708 ebuild.
Check for syntax error or corruption in the ebuild. (--debug)
!!! all ebuilds that could satisfy "sys-devel/gnuconfig" have been masked.
!!! (dependency required by "app-shells/bash-2.05b-r8" [ebuild])
!!! Error calculating dependencies. Please correct. |
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
Genone
Retired Dev
Joined: 14 Mar 2003
Posts: 9615
Location: beyond the rim
|
| Posted: Sat Dec 13, 2003 6:34 pm Post subject: |
|
|
| Well, that codepart in ebuild.sh is basically just checking if stdout is a terminal and if not it echos the current value of $x (usually a USE flag). The whole it-elif stuff is because if you use FEATURES="userpriv" the portage user doesn't have read access to it. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 13, 2003 7:06 pm Post subject: |
|
|
I wonder why it is convinced that everything is masked. I have set to to accept the sparc keyword and also ~sparc and in both cases it thinks things are masked.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 13, 2003 10:08 pm Post subject: |
|
|
Today's latest. I had to copy the /var/cache/edb/dep contents over to the Solaris install.
One problem I seem to be having is that there seems to be a lot of stuff hard coded as /usr/bin so I have to link things into /usr/bin.
| Code: | bash-2.05# ACCEPT_KEYWORDS="~sparc" emerge gnuconfig
Calculating dependencies ...done!
>>> emerge (1 of 1) sys-devel/gnuconfig-20030708 to /
>>> md5 src_uri ;-) gnuconfig-20030708.tar.bz2
id: illegal option -- n
Usage: id [-ap] [user]
/usr/sbin/ebuild.sh: [: ==: unary operator expected
Traceback (most recent call last):
File "/export/home/root/gentoo/usr/bin/emerge", line 2153, in ?
mydepgraph.merge(mydepgraph.altlist())
File "/export/home/root/gentoo/usr/bin/emerge", line 1357, in merge
retval=portage.doebuild(y,"merge",myroot,edebug)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1924, in doebuild
retval=spawnebuild("install",actionmap,debug,1)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1633, in spawnebuild
retval=spawnebuild(actionmap[mydo]["dep"],actionmap,debug,alwaysdep)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1633, in spawnebuild
retval=spawnebuild(actionmap[mydo]["dep"],actionmap,debug,alwaysdep)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1640, in spawnebuild
actionmap[mydo]["args"][1])
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1194, in spawn
os.execve(mycommand,myargs,settings.environ())
OSError: [Errno 2] No such file or directory
bash-2.05# which id
/usr/bin/id
bash-2.05# cd /usr
bash-2.05# cd bin
bash-2.05# mv id id.bak
bash-2.05# ln -s /usr/local/bin/id id
bash-2.05# ACCEPT_KEYWORDS="~sparc" emerge gnuconfig
Calculating dependencies ...done!
>>> emerge (1 of 1) sys-devel/gnuconfig-20030708 to /
>>> md5 src_uri ;-) gnuconfig-20030708.tar.bz2
Traceback (most recent call last):
File "/export/home/root/gentoo/usr/bin/emerge", line 2153, in ?
mydepgraph.merge(mydepgraph.altlist())
File "/export/home/root/gentoo/usr/bin/emerge", line 1357, in merge
retval=portage.doebuild(y,"merge",myroot,edebug)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1924, in doebuild
retval=spawnebuild("install",actionmap,debug,1)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1633, in spawnebuild
retval=spawnebuild(actionmap[mydo]["dep"],actionmap,debug,alwaysdep)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1633, in spawnebuild
retval=spawnebuild(actionmap[mydo]["dep"],actionmap,debug,alwaysdep)
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1640, in spawnebuild
actionmap[mydo]["args"][1])
File "/usr/local/lib/python2.2/site-packages/portage.py", line 1194, in spawn
os.execve(mycommand,myargs,settings.environ())
OSError: [Errno 2] No such file or directory |
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
Solean.
n00b
Joined: 12 Dec 2003
Posts: 6
|
| Posted: Sun Dec 14, 2003 5:05 am Post subject: |
|
|
| Ahh... A soap opera... |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sun Dec 14, 2003 6:03 am Post subject: |
|
|
| Solean. wrote: | | Ahh... A soap opera... |
Well it is an easy way for me to keep notes. 
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
IWBCMAN
Guru
Joined: 25 Jun 2002
Posts: 474
|
| Posted: Sun Dec 14, 2003 12:11 pm Post subject: |
|
|
Don't know if this will help but I saw it at slashdot the otherday.....
http://slashdot.org/comments.pl?sid=89131&cid=7710961
| Quote: |
If you decide to compile stuff on Solaris, some problems are likely to occur if you aren't aware of them.
1) Do NOT use GNU binutils. GNU strip and GNU ld do not understand Solaris x86 ELF headers and create corrupt binaries.
2) In almost 100% of the cases, GNU autoconf will not figure out that the Solaris linker requires the specification of a runtime linker option. Solve this by running autoconf like;
LDFLAGS="-L/foo -R/foo" ./configure
This is obviously pointless to do if you're using static libraries.
For more info, read ld(1).
|
a follow up response to this was :
| Quote: |
I have been using GNU binutils, GNU ld and GNU strip on Solaris. I can safely say that Solaris x86 and Sparc both interoperate with the GNU utilities like a champ. I've never had any issues with either on boht platforms.
As for the LDFLAGS, I've run into that a few times.
|
So I am not sure what the situation is- but hats off to you for trying to get this working- I am not a solaris fan, having used the original *free* solaris 7.0, which had horrible hardware support, and ran dog-slow, but if you succeed in getting it running, solaris might be a tad bit more interesting once again.....
I also saw that that the solaris partition ID is 82, ie. the same as linux swap....this maybe usefull if you want to have multiple *nix'es installed on one harddrive..... |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Mon Dec 15, 2003 5:38 am Post subject: |
|
|
Ahh, good, that will help a lot. Now I need to permanantly disable that ability of it from getting those files. I created /etc/make.profile/gcc33-sparc64-solaris2.9 . I'll need edit the files in there. There are going to be a lot of things to disable.
Looks like I might have to start over again.
I wonder about glibc? Or should I just stick to the Sun libs.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
GenTimJS
Guru
Joined: 03 May 2003
Posts: 406
Location: NH, USA
|
| Posted: Wed Dec 24, 2003 2:35 pm Post subject: teting |
|
|
If you need a guinea pig to help you test stuff once you feel you have something "workable" that can be untared over the local filesystem or whatnot, let me know. I've got an ultra5 I can throw another disk in for solaris9 in a heartbeat (currently running gentoo testing what linux games will compile&run for sparc)
_________________
-Tim Smith |
|
| Back to top |
|
|
devsk
Advocate
Joined: 24 Oct 2003
Posts: 3003
Location: Bay Area, CA
|
| Posted: Sat Dec 27, 2003 4:24 am Post subject: |
|
|
this is an impossible task! To get portage to work on another linux distro itself is so tough, solaris with altogether different approach to init, differnt libc, binutils and compiler is almost un-doable.
I almost had to re-install my stable Fedora just because I typed in 'emerge -u world' by mistake and had my glibc updated to 2.3.3 throwing my whole system to trash...but then rescue mode saved me(just wonder sometimes if some basic stuff like a proper shutdown be static executable not dependent on anything).
even with a stable portage, there are packages I can't install with emerge, just because fedora and gentoo work so differently, so they end up 'inject'ed(thank God for inject in portage). On my gentoo, I never even think once before firing 'emerge -u world'. |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Sat Dec 27, 2003 5:32 am Post subject: Re: teting |
|
|
| GenTimJS wrote: | | If you need a guinea pig to help you test stuff once you feel you have something "workable" that can be untared over the local filesystem or whatnot, let me know. I've got an ultra5 I can throw another disk in for solaris9 in a heartbeat (currently running gentoo testing what linux games will compile&run for sparc) |
Well currently my system is indisposed compiling away at a Gentoo install that I managed to get on another drive.
I still think this is a "POSSIBLE" task I just may be going about it wrong. One issue that I'm having with Solaris is that Sun in their infinite wiseness loaded a bunch of GNU utils in /usr/bin. But I wouldn't dare tell portage to dump compiled things in there for fear of breaking the system. (Killing tar with GNU tar, make with GNU make....) I would have appreciated it if Sun put all of the freeware in /usr/local/ just like the packages from Sunfreeware.
So right now, I still need a package list (if it exists) of a stage 1 and stage 3 install. So I can inject them and start over. (Things like GCC v3.2.3, make version 2.0, python v 2.2 etc)
I'm not looking to remake solaris, I'm looking to making it easier to get things on solaris. So if for example I need Xine I won't have to go out hunting for all of the dependencies. I would like to make Solaris more attractive to the desktop in situations where someone needs a dual use system. One that they can do their normal job of working with Oracle, Solstice, veritas or whatever but also do things like browse websites, view online streaming webcasts, have the latest versions of Firebird, Thunderbird and Samba.
I'm not as much interested in things like etc-update or the init system. I might just have portage dump the config files into a dummy directory so the user can move them appropriately.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
Cerement
Guru
Joined: 14 Jun 2003
Posts: 404
|
| Posted: Sun Jan 04, 2004 5:32 am Post subject: |
|
|
Well, with luck, your project might get a little easier ...
it's not Solaris, but it looks like Sun might be getting a little more amenable ...
Sun hands Cobalt an open-source lifeline |
|
| Back to top |
|
|
haubi
Retired Dev
Joined: 07 Jan 2004
Posts: 3
|
| Posted: Thu Jan 08, 2004 8:09 am Post subject: Re: teting |
|
|
| stonent wrote: | <snip>
I'm not looking to remake solaris, I'm looking to making it easier to get things on solaris. So if for example I need Xine I won't have to go out hunting for all of the dependencies. I would like to make Solaris more attractive to the desktop in situations where someone needs a dual use system. One that they can do their normal job of working with Oracle, Solstice, veritas or whatever but also do things like browse websites, view online streaming webcasts, have the latest versions of Firebird, Thunderbird and Samba.
I'm not as much interested in things like etc-update or the init system. I might just have portage dump the config files into a dummy directory so the user can move them appropriately. |
This looks interesting to me, since i'm looking around for a suitable package management system for my company to install (build from source) our own software packages on different platforms, at least HP-UX, AIX, SunOS, Cygwin, (non-)gentoo-Linux, to be useable in different binary-versions by our end-application programmers.
A colleague of me uses gentoo, and he pointed me to portage, another one uses FreeBSD, and he pointed me to the FreeBSD-system with Makefiles.
For me, i want to switch to gentoo soon, as i've already running a gentoo installation in a VMware-box on my debian.
In the last month i've developed another system based on a so-called top-level-Makefile for GNU-make to handle less than 10 packages, always in face of the requirement to use a somewhat professional tool, as the number of our own packages will grow more or less fast, and - well - it works.
But as far as i've seen portage (source) by now, it is'nt yet possible to give portage a different root-dir than / (with bin, usr, ...) such as /toolbox/1.2.3/ (with bin, ...), though i've found some efforts to do this.
What do you think, will portage ever meet this claims ? |
|
| Back to top |
|
|
Genone
Retired Dev
Joined: 14 Mar 2003
Posts: 9615
Location: beyond the rim
|
| Posted: Thu Jan 08, 2004 3:40 pm Post subject: Re: teting |
|
|
| haubi wrote: | | But as far as i've seen portage (source) by now, it is'nt yet possible to give portage a different root-dir than / (with bin, usr, ...) such as /toolbox/1.2.3/ (with bin, ...), though i've found some efforts to do this. |
Actually there is the ROOT environment variable which sounds like the thing you're looking for, however this feature is rarely used and therefore not completely tested. |
|
| Back to top |
|
|
devsk
Advocate
Joined: 24 Oct 2003
Posts: 3003
Location: Bay Area, CA
|
| Posted: Mon Jan 19, 2004 11:07 pm Post subject: |
|
|
| stonent wrote: | Ahh, good, that will help a lot. Now I need to permanantly disable that ability of it from getting those files. I created /etc/make.profile/gcc33-sparc64-solaris2.9 . I'll need edit the files in there. There are going to be a lot of things to disable.
Looks like I might have to start over again.
I wonder about glibc? Or should I just stick to the Sun libs. |
So, did you try it again? See if you missed any steps mentioned in here:
https://forums.gentoo.org/viewtopic.php?t=125553
and here:
https://forums.gentoo.org/viewtopic.php?t=28559
You looked very close. Hats off to you!! |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Tue Jan 20, 2004 11:40 pm Post subject: |
|
|
Well I was going to do this at work but I locked up Virtual PC trying to paste in your script into solaris. I'm waiting for it to finish loading Python right now. One thing I really need to figure out is a profile for Solaris Intel and Solaris Sparc so that I can emerge the correct things. Without destroying Solaris.
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Wed Jan 21, 2004 3:08 am; edited 1 time in total |
|
| Back to top |
|
|
devsk
Advocate
Joined: 24 Oct 2003
Posts: 3003
Location: Bay Area, CA
|
| Posted: Wed Jan 21, 2004 3:05 am Post subject: |
|
|
| I just found out that "ROOT=/opt emerge -p -O zlib" installs just zlib package in /opt, with its own /opt/usr, /opt/bin, /opt/var, /opt/etc ...etc. , with its own database in /opt/var/tmp. Wow!! You don't have to be root to do all this anymore!! You just have to learn to manage /opt/etc/ld.so.conf and /opt/etc/env.d in conjuction with /etc/ld.so.conf and /etc/env.d!! |
|
| Back to top |
|
|
stonent
Veteran
Joined: 07 Aug 2003
Posts: 1139
Location: Texas
|
| Posted: Wed Jan 21, 2004 3:09 am Post subject: |
|
|
So you got it to actually compile something in Solaris?
This is exciting! Right now I'm installing packages into /opt/CSW from Blastwave.org using pkg-get. Hopefully if I can get the system to bootstrap, then I can remove them from CSW
_________________
Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Alternative Architectures
