elogind is a big, what instead of consolekit? [solved]

RayDude · Last edited by RayDude on Fri Aug 27, 2021 3:27 am; edited 1 time in total

I just did a stage3 install on a dual core arm (a hardware I designed using a Cyclone V SOC).

I got it working pretty well, but there is no console with the stage 3 tarball.

This is the depgraph for elogind:

mike155 · Posted: Thu Aug 26, 2021 3:24 pm Post subject:

Which package(s) pull(s) in elogind?

Look at the output of:

RayDude · Posted: Thu Aug 26, 2021 3:38 pm Post subject:

RayDude · Posted: Thu Aug 26, 2021 4:23 pm Post subject:

You know what?

This totally worked:

cboldt · Veteran Joined: 24 Aug 2005 Posts: 1046

dmpogo · Advocate Joined: 02 Sep 2004 Posts: 3458 Location: Canada

Sorry, but it is a bit of mess of a question, you have piled many issues in one.

What are you trying to achieve, console only system without graphics environment and without elogind ? The setting USE='-elogind' should do the trick. You should also get rid of polkit (the only package which unconditionally requires elogind on my system, at least), which should be possible if you do not use udisks, and upower

NeddySeagoon · Posted: Thu Aug 26, 2021 4:58 pm Post subject:

RayDude,

What does "no console" mean?
You can't log in, the screen is blank, the keyboard doesn't work?
Note of the above?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.

RayDude · Posted: Thu Aug 26, 2021 5:21 pm Post subject:

Thanks Neddy, dmpogo, cboldt.

This is an embedded system: no keyboard, no monitor, no USB, just a serial port and two ethernet ports.

NeddySeagoon · Posted: Thu Aug 26, 2021 5:41 pm Post subject:

RayDude,

What do you have in /etc/inittab ?

The default is

cboldt · Veteran Joined: 24 Aug 2005 Posts: 1046

Not much needed to get a console, certainly not consolekit, polkit, dbus, or elogind.

Neddy has you on the right track. I'm surprised default /etc/inittab has all the getty's commented out!

Curious what you use to monitor with. I've used displayless laptops as server, and just ssh in with another machine providing keyboard and console - never crossed my mind to use serial port, USB, whatever.

Hu · Administrator Joined: 06 Mar 2007 Posts: 22855

RayDude · Posted: Thu Aug 26, 2021 6:24 pm Post subject:

Yep!

You guys are right. I didn't understand how it worked.

My serial port is simply /dev/ttyS0, I think and it looks enabled in inittab, but I think the baud rate is wrong. I'll figure out how to configure inittab now.

Imagine using linux all these years and not needing to learn this before now.

THANKS MUCH!
_________________
Some day there will only be free software.

NeddySeagoon · Posted: Thu Aug 26, 2021 8:07 pm Post subject:

RayDude,

ssh in, install minicom and do a loopback test on the serial port.

Turn off all handshaking, link the Tx and Rx pins together anh see that anything sent to the serial port comes back.
That proves most of the kernel setup. It will work at any baud rate, unless you can configure your arm system to do split baud rates.
Split baud rates were never a thing on the PC due to a design error by IBM.

To get kernel messages on the serial port, yon need to pass something like

RayDude · Posted: Thu Aug 26, 2021 9:13 pm Post subject:

I haven't had a chance to reboot and prove the serial console is working, but my other dependency issues went away as soon as I removed elogind from USE.

Thanks again for your help.
_________________
Some day there will only be free software.

RayDude · Posted: Fri Aug 27, 2021 3:26 am Post subject:

I enabled the correct device and it's working.

Thanks again for your help!
_________________
Some day there will only be free software.