| View previous topic :: View next topic |
| Author |
Message |
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
 Posted: Fri Nov 12, 2021 7:02 pm Post subject: Problems after update gentoo kernel 5.10.61-> 5.10.76-r1 |
 |
|
I have HP ZBook Fury 15 G7 (Intel Core i9 10885H / nVidia Quadro RTX 3000).
I use stable kernel version and only one thing which not working was a touch pad.
Problems started when I update Gentoo kernel (gentoo-sources) from 5.10.61 to 5.10.76-r1:
1. AUDIO driver stop working
| Code: | Linux Titan 5.10.61-gentoo #1 SMP Wed Nov 10 15:03:21 CET 2021 x86_64 Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz GenuineIntel GNU/Linux
[ 5.568029] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.573970] hdaudio hdaudioC0D0: Unable to bind the codec
[ 7.559219] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 7.559223] sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 7.559231] sof-audio-pci 0000:00:1f.3: enabling device (0000 -> 0002)
[ 7.559581] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 7.559691] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa98baca0)
[ 7.566061] sof-audio-pci 0000:00:1f.3: use msi interrupt mode
[ 7.581475] sof-audio-pci 0000:00:1f.3: hda codecs found, mask 5
[ 7.581478] sof-audio-pci 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 7.581482] sof-audio-pci 0000:00:1f.3: DMICs detected in NHLT tables: 4
[ 7.709022] sof-audio-pci 0000:00:1f.3: Firmware info: version 1:6:1-53680
[ 7.709026] sof-audio-pci 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:17:0
[ 7.713997] sof-audio-pci 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:17:0
[ 7.730677] sof-audio-pci 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred
[ 7.749745] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 7.749745] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.749746] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.749746] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
[ 7.749747] snd_hda_codec_realtek ehdaudio0D0: inputs:
[ 7.749747] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19
[ 7.894920] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[ 7.894933] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten |
After update I got:
| Code: | Linux Titan 5.10.76-gentoo-r1 #1 SMP Wed Nov 10 15:27:05 CET 2021 x86_64 Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz GenuineIntel GNU/Linux
[ 5.603914] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.681437] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 7.681443] sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 7.681459] sof-audio-pci 0000:00:1f.3: enabling device (0000 -> 0002)
[ 7.681616] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 7.681691] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffbeabae00)
[ 7.688330] sof-audio-pci 0000:00:1f.3: use msi interrupt mode
[ 7.765644] Modules linked in: hp_wmi snd_hda_codec_generic(+) wmi_bmof x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_sof_pci kvm snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof_intel_hda irqbypass snd_sof iwlmvm(+) ledtrig_audio snd_soc_skl serio_raw snd_soc_acpi_intel_match snd_soc_acpi snd_soc_hdac_hda snd_soc_sst_ipc snd_soc_sst_dsp rtsx_pci snd_hda_ext_core snd_hda_codec_hdmi mei_me iwlwifi intel_lpss_pci intel_ish_ipc(+) processor_thermal_device xhci_pci mei intel_lpss intel_ishtp xhci_pci_renesas mfd_core intel_pch_thermal intel_soc_dts_iosf ucsi_acpi(+) typec_ucsi wmi i2c_hid int3403_thermal(+) int340x_thermal_zone pinctrl_cannonlake hp_accel(+) pinctrl_intel lis3lv02d int3400_thermal acpi_thermal_rel efivarfs
[ 68.093376] udevd[2467]: worker [2537] /devices/pci0000:00/0000:00:1f.3/ehdaudio0D0 is taking a long time
[ 189.581904] udevd[2467]: worker [2537] /devices/pci0000:00/0000:00:1f.3/ehdaudio0D0 timeout; kill it
[ 189.581935] udevd[2467]: seq 3079 '/devices/pci0000:00/0000:00:1f.3/ehdaudio0D0' killed
[ 189.582542] udevd[2467]: worker [2537] failed while handling '/devices/pci0000:00/0000:00:1f.3/ehdaudio0D0'
|
2. System hang during reboot / poweroff / halt
When I try to switch off or reboot system, the procedure hang:
| Code: | * Killing remaining processes ...
* Saving dependency cache ...
* Remounting remaining filesystems read-only ...
* Remounting / read only ...
* failed because we are using /
* ERROR: mount-ro failed to start |
system hang in this place.
3. One positive thing touch pad starts working
LSPCI:
| Code: | 00:00.0 Host bridge: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 02)
00:02.0 VGA compatible controller: Intel Corporation CometLake-H GT2 [UHD Graphics] (rev 05)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller
00:13.0 Serial controller: Intel Corporation Device 06fc
00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi
00:15.0 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH Serial IO I2C Controller #0
00:15.1 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH Serial IO I2C Controller #1
00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller
00:1b.0 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #17 (rev f0)
00:1b.4 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation Device 06b8 (rev f0)
00:1c.5 PCI bridge: Intel Corporation Comet Lake PCIe Port #6 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device 068e
00:1f.3 Multimedia audio controller: Intel Corporation Comet Lake PCH cAVS
00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller
00:1f.5 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH SPI Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (10) I219-LM
01:00.0 VGA compatible controller: NVIDIA Corporation TU104GLM [Quadro RTX 4000 Mobile / Max-Q] (rev a1)
01:00.1 Audio device: NVIDIA Corporation TU104 HD Audio Controller (rev a1)
01:00.2 USB controller: NVIDIA Corporation TU104 USB 3.1 Host Controller (rev a1)
01:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1)
02:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550 NVMe SSD (rev 01)
03:00.0 Non-Volatile memory controller: Sandisk Corp Device 501d (rev 01)
04:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
05:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
05:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
05:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
05:04.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
06:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] (rev 06)
3a:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] (rev 06)
6e:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01) |
LSHW:
| Code: |
titan
description: Computer
width: 64 bits
capabilities: smp vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 128GiB
*-cpu
product: Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 6.165.2
size: 2710MHz
capacity: 5300MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp pku ospke md_clear flush_l1d arch_capabilities cpufreq
configuration: microcode=226
*-pci
description: Host bridge
product: 10th Gen Core Processor Host Bridge/DRAM Registers
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=skl_uncore
resources: irq:0
*-pci:0
description: PCI bridge
product: 6th-10th Gen Core Processor PCIe Controller (x16)
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:138 ioport:3000(size=4096) memory:e0000000-e10fffff ioport:80000000(size=303038464)
*-display
description: VGA compatible controller
product: TU104GLM [Quadro RTX 4000 Mobile / Max-Q]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:206 memory:e0000000-e0ffffff memory:80000000-8fffffff memory:90000000-91ffffff ioport:3000(size=128) memory:e1080000-e10fffff
*-multimedia
description: Audio device
product: TU104 HD Audio Controller
vendor: NVIDIA Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:17 memory:e1000000-e1003fff
*-usb
description: USB controller
product: TU104 USB 3.1 Host Controller
vendor: NVIDIA Corporation
physical id: 0.2
bus info: pci@0000:01:00.2
version: a1
width: 64 bits
clock: 33MHz
capabilities: xhci cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:202 memory:92000000-9203ffff memory:92040000-9204ffff
*-serial UNCLAIMED
description: Serial bus controller
product: TU104 USB Type-C UCSI Controller
vendor: NVIDIA Corporation
physical id: 0.3
bus info: pci@0000:01:00.3
version: a1
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: latency=0
resources: memory:e1004000-e1004fff
*-display
description: VGA compatible controller
product: CometLake-H GT2 [UHD Graphics]
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
logical name: /dev/fb0
version: 05
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom fb
configuration: depth=32 driver=i915 latency=0 resolution=3840,2160
resources: irq:147 memory:df000000-dfffffff memory:a0000000-afffffff ioport:4000(size=64) memory:c0000-dffff
*-generic:0
description: Signal processing controller
product: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
vendor: Intel Corporation
physical id: 4
bus info: pci@0000:00:04.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: cap_list
configuration: driver=proc_thermal latency=0
resources: iomemory:400-3ff irq:16 memory:404a100000-404a107fff
*-generic:1
description: Signal processing controller
product: Comet Lake PCH Thermal Controller
vendor: Intel Corporation
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: cap_list
configuration: driver=intel_pch_thermal latency=0
resources: iomemory:400-3ff irq:16 memory:404a113000-404a113fff
*-communication:0
description: Serial controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: 8250 bus_master cap_list
configuration: driver=intel_ish_ipc latency=0
resources: iomemory:400-3ff irq:20 memory:404a10c000-404a10dfff
*-usb
description: USB controller
product: Comet Lake USB 3.1 xHCI Host Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:183 memory:e1420000-e142ffff
*-memory UNCLAIMED
description: RAM memory
product: Comet Lake PCH Shared SRAM
vendor: Intel Corporation
physical id: 14.2
bus info: pci@0000:00:14.2
version: 00
width: 64 bits
clock: 33MHz (30.3ns)
capabilities: cap_list
configuration: latency=0
resources: iomemory:400-3ff memory:e1434000-e1435fff memory:404a112000-404a112fff
*-network:0
description: Ethernet interface
product: Comet Lake PCH CNVi WiFi
vendor: Intel Corporation
physical id: 14.3
bus info: pci@0000:00:14.3
logical name: wlp0s20f3
version: 00
serial: 2c:db:07:b4:e4:1b
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=iwlwifi driverversion=5.10.76-gentoo-r1 firmware=59.601f3a66.0 QuZ-a0-hr-b0-59.u ip=192.168.0.185 latency=0 link=yes multicast=yes
resources: irq:16 memory:e1430000-e1433fff
*-serial:0
description: Serial bus controller
product: Comet Lake PCH Serial IO I2C Controller #0
vendor: Intel Corporation
physical id: 15
bus info: pci@0000:00:15.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=intel-lpss latency=0
resources: irq:16 memory:404a110000-404a110fff
*-serial:1
description: Serial bus controller
product: Comet Lake PCH Serial IO I2C Controller #1
vendor: Intel Corporation
physical id: 15.1
bus info: pci@0000:00:15.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=intel-lpss latency=0
resources: irq:17 memory:404a111000-404a111fff
*-communication:1
description: Communication controller
product: Comet Lake HECI Controller
vendor: Intel Corporation
physical id: 16
bus info: pci@0000:00:16.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=mei_me latency=0
resources: iomemory:400-3ff irq:201 memory:404a10f000-404a10ffff
*-pci:1
description: PCI bridge
product: Comet Lake PCI Express Root Port #17
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: f0
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:139 memory:e1300000-e13fffff
*-nvme
description: NVMe device
product: WDC WDS200T2B0C-00PXH0
vendor: Sandisk Corp
physical id: 0
bus info: pci@0000:02:00.0
logical name: /dev/nvme0
version: 21705000
serial: 20448E800050
width: 64 bits
clock: 33MHz
capabilities: nvme nvm_express bus_master cap_list
configuration: driver=nvme latency=0 nqn=nqn.2018-01.com.wdc:nguid:E8238FA6BF53-0001-001B448B49D5AB70 state=live
resources: irq:16 memory:e1300000-e1303fff memory:e1304000-e13040ff
*-namespace
description: NVMe disk
physical id: 1
bus info: nvme@0:1
logical name: /dev/nvme0n1
configuration: wwid=eui.e8238fa6bf530001001b448b49d5ab70
*-pci:2
description: PCI bridge
product: Comet Lake PCI Express Root Port #21
vendor: Intel Corporation
physical id: 1b.4
bus info: pci@0000:00:1b.4
version: f0
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:140 memory:e1200000-e12fffff
*-nvme
description: NVMe device
product: WDC WDS200T2B0C-00PXH0
vendor: Sandisk Corp
physical id: 0
bus info: pci@0000:03:00.0
logical name: /dev/nvme1
version: 21705000
serial: 204618802582
width: 64 bits
clock: 33MHz
capabilities: nvme nvm_express bus_master cap_list
configuration: driver=nvme latency=0 nqn=nqn.2018-01.com.wdc:nguid:E8238FA6BF53-0001-001B448B4925A646 state=live
resources: irq:16 memory:e1200000-e1203fff memory:e1204000-e12040ff
*-namespace
description: NVMe disk
physical id: 1
bus info: nvme@1:1
logical name: /dev/nvme1n1
configuration: wwid=eui.e8238fa6bf530001001b448b4925a646
*-pci:3
description: PCI bridge
product: Intel Corporation
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: f0
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:141 ioport:5000(size=12288) memory:b0000000-de0fffff ioport:4000000000(size=1241513984)
*-pci
description: PCI bridge
product: JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: iomemory:61510-6150f irq:16 ioport:5000(size=8192) memory:b0000000-ddffffff ioport:4000000000(size=1241513984)
*-pci:0
description: PCI bridge
product: JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:05:00.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:143 memory:ddf00000-ddffffff
*-generic
description: System peripheral
product: JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:06:00.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=thunderbolt latency=0
resources: irq:16 memory:ddf00000-ddf3ffff memory:ddf40000-ddf40fff
*-pci:1
description: PCI bridge
product: JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:05:01.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:144 ioport:5000(size=4096) memory:c7000000-ddefffff ioport:4025000000(size=620756992)
*-pci:2
description: PCI bridge
product: JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:05:02.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:145 memory:c6f00000-c6ffffff
*-usb
description: USB controller
product: JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:3a:00.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: xhci cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:203 memory:c6f00000-c6f0ffff
*-pci:3
description: PCI bridge
product: JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018]
vendor: Intel Corporation
physical id: 4
bus info: pci@0000:05:04.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:146 ioport:6000(size=4096) memory:b0000000-c6efffff ioport:4000000000(size=620756992)
*-pci:4
description: PCI bridge
product: Comet Lake PCIe Port #6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: f0
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:142 memory:e1100000-e11fffff
*-generic
description: MMC Host
product: RTS525A PCI Express Card Reader
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:6e:00.0
logical name: mmc0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=rtsx_pci latency=0
resources: irq:200 memory:e1100000-e1100fff
*-isa
description: ISA bridge
product: Intel Corporation
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-pnp00:00
product: Motherboard registers
physical id: 0
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: Motherboard registers
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:02
product: Motherboard registers
physical id: 2
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: AT Real-Time Clock
physical id: 3
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:04
product: PnP device INT3f0d
physical id: 4
capabilities: pnp
configuration: driver=system
*-pnp00:05
product: PnP device HPQ8002
physical id: 5
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:06
product: Motherboard registers
physical id: 6
capabilities: pnp
configuration: driver=system
*-pnp00:07
product: Motherboard registers
physical id: 7
capabilities: pnp
configuration: driver=system
*-pnp00:08
product: Motherboard registers
physical id: 8
capabilities: pnp
configuration: driver=system
*-multimedia
description: Multimedia audio controller
product: Comet Lake PCH cAVS
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=sof-audio-pci latency=64
resources: iomemory:400-3ff iomemory:400-3ff irq:204 memory:404a108000-404a10bfff memory:404a000000-404a0fffff
*-serial:2
description: SMBus
product: Comet Lake PCH SMBus Controller
vendor: Intel Corporation
physical id: 1f.4
bus info: pci@0000:00:1f.4
version: 00
width: 64 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: iomemory:400-3ff irq:16 memory:404a10e000-404a10e0ff ioport:efa0(size=32)
*-serial:3 UNCLAIMED
description: Serial bus controller
product: Comet Lake PCH SPI Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 00
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: memory:fe010000-fe010fff
*-network:1
description: Ethernet interface
product: Ethernet Connection (10) I219-LM
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
logical name: enp0s31f6
version: 00
serial: 6c:02:e0:ca:19:cf
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=5.10.76-gentoo-r1 firmware=0.6-4 latency=0 link=no multicast=yes port=twisted pair
resources: irq:150 memory:e1400000-e141ffff
*-input:0
product: Sleep Button
physical id: 1
logical name: input0
logical name: /dev/input/event0
capabilities: platform
*-input:1
product: Lid Switch
physical id: 2
logical name: input1
logical name: /dev/input/event1
capabilities: platform
*-input:2
product: ELAN0720:00 04F3:313A
physical id: 3
logical name: input11
logical name: /dev/input/event8
logical name: /dev/input/mouse0
capabilities: i2c
*-input:3
product: ELAN0720:00 04F3:313A
physical id: 4
logical name: input13
logical name: /dev/input/event9
logical name: /dev/input/mouse1
capabilities: i2c
*-input:4
product: ELAN0720:00 04F3:313A
physical id: 5
logical name: input14
logical name: /dev/input/event10
logical name: /dev/input/mouse2
capabilities: i2c
*-input:5
product: Dell Dell Universal Receiver
physical id: 6
logical name: input15
logical name: /dev/input/event11
logical name: input15::capslock
logical name: input15::compose
logical name: input15::kana
logical name: input15::numlock
logical name: input15::scrolllock
capabilities: usb
*-input:6
product: Dell Dell Universal Receiver Mouse
physical id: 7
logical name: input16
logical name: /dev/input/event12
logical name: /dev/input/mouse3
capabilities: usb
*-input:7
product: Dell Dell Universal Receiver Consumer Control
physical id: 8
logical name: input17
logical name: /dev/input/event13
capabilities: usb
*-input:8
product: Dell Dell Universal Receiver System Control
physical id: 9
logical name: input18
logical name: /dev/input/event14
capabilities: usb
*-input:9
product: ST LIS3LV02DL Accelerometer
physical id: a
logical name: input19
logical name: /dev/input/event15
logical name: /dev/input/js0
capabilities: platform
*-input:10
product: Power Button
physical id: b
logical name: input2
logical name: /dev/input/event2
capabilities: platform
*-input:11
product: HP HD Camera: HP HD Camera
physical id: c
logical name: input20
logical name: /dev/input/event16
capabilities: usb
*-input:12
product: HP HD Camera: HP IR Camera
physical id: d
logical name: input21
logical name: /dev/input/event17
capabilities: usb
*-input:13
product: Power Button
physical id: e
logical name: input3
logical name: /dev/input/event3
capabilities: platform
*-input:14
product: Video Bus
physical id: f
logical name: input4
logical name: /dev/input/event4
capabilities: platform
*-input:15
product: Video Bus
physical id: 10
logical name: input5
logical name: /dev/input/event5
capabilities: platform
*-input:16
product: AT Translated Set 2 keyboard
physical id: 11
logical name: input6
logical name: /dev/input/event6
logical name: input6::capslock
logical name: input6::numlock
logical name: input6::scrolllock
capabilities: i8042
*-input:17
product: HP WMI hotkeys
physical id: 12
logical name: input7
logical name: /dev/input/event7
capabilities: platform
|
|
|
| Back to top |
|
 |
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3007
Location: Edge of marsh USA
|
| Posted: Sat Nov 13, 2021 4:07 am Post subject: |
|
|
Did you copy 5.10.61 .config and make oldconfig? Do you hand configure the kernel and/or use genkernel? Maybe 5.10 series is going through a rough patch?
Anything interesting if you diff the two different .config files?
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sat Nov 13, 2021 11:13 am Post subject: |
|
|
Yes i copy config from 5.10.61 kernel and fixes are minimal:
| Code: | 3c3
< # Linux/x86 5.10.61-gentoo Kernel Configuration
---
> # Linux/x86 5.10.76-gentoo-r1 Kernel Configuration
760a761,763
> CONFIG_GCC_PLUGINS=y
> # CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
> # CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
3932c3935
< CONFIG_SND_HDA_EXT_CORE=m
---
> CONFIG_SND_HDA_EXT_CORE=y
3959c3962
< CONFIG_SND_SOC_ACPI=m
---
> CONFIG_SND_SOC_ACPI=y
3990c3993
< CONFIG_SND_SOC_INTEL_SST=m
---
> CONFIG_SND_SOC_INTEL_SST=y
4001,4003c4004,4006
< CONFIG_SND_SOC_INTEL_CML_H=m
< CONFIG_SND_SOC_INTEL_CML_LP=m
< CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m
---
> CONFIG_SND_SOC_INTEL_CML_H=y
> # CONFIG_SND_SOC_INTEL_CML_LP is not set
> CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=y
4005,4006c4008,4009
< CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m
< CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
---
> CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=y
> CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
4008a4012,4013
> CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m
> CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m
4010,4013c4015,4018
< # CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH is not set
< # CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH is not set
< # CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH is not set
< # CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH is not set
---
> CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m
> CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m
> CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m
> CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m
4111a4117
> CONFIG_SND_SOC_DA7219=m
4121c4127
< CONFIG_SND_SOC_HDAC_HDA=m
---
> CONFIG_SND_SOC_HDAC_HDA=y
4153a4160,4161
> CONFIG_SND_SOC_RT1011=m
> CONFIG_SND_SOC_RT1015=m
4155a4164,4165
> CONFIG_SND_SOC_RT5682=m
> CONFIG_SND_SOC_RT5682_I2C=m
4371c4381
< # CONFIG_I2C_HID is not set
---
> CONFIG_I2C_HID=m
5562a5573,5576
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
> # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
> # CONFIG_GCC_PLUGIN_STACKLEAK is not set |
I use hand kernel configuration. |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sat Nov 13, 2021 7:35 pm Post subject: |
|
|
Interesting, I applied following changes in kernel 5.10.61:
| Code: |
> CONFIG_SND_HDA_EXT_CORE=y
> CONFIG_SND_SOC_ACPI=y
> CONFIG_SND_SOC_INTEL_SST=y
> CONFIG_SND_SOC_INTEL_CML_H=y
> # CONFIG_SND_SOC_INTEL_CML_LP is not set
> CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=y
> CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=y
> CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
> CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m
> CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m
> CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m
> CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m
> CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m
> CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m
> CONFIG_SND_SOC_DA7219=m
> CONFIG_SND_SOC_HDAC_HDA=y
> CONFIG_SND_SOC_RT1011=m
> CONFIG_SND_SOC_RT1015=m
> CONFIG_SND_SOC_RT5682=m
> CONFIG_SND_SOC_RT5682_I2C=m
> CONFIG_I2C_HID=m
|
After that everything start working (touchpad too), but when I used this modified config for newer kernel 5.10.76-r1 or 5.10.79 the
following bugs appear:
-> no audio
-> system hang during reboot
From these reasons i will stay with kernel 5.10.61 and kernel 5.10.76-r1 in my opinion is UNSTABLE.
Last edited by janbielanski on Sat Nov 13, 2021 7:36 pm; edited 1 time in total |
|
| Back to top |
|
|
jburns
Veteran
Joined: 18 Jan 2007
Posts: 1227
Location: Massachusetts USA
|
| Posted: Sat Nov 13, 2021 7:35 pm Post subject: |
|
|
| When you changed the sound modules from modules to built-in you also need to build the required firmware in the kernel. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5358
Location: Bavaria
|
| Posted: Sat Nov 13, 2021 10:04 pm Post subject: |
|
|
| janbielanski wrote: | Yes i copy config from 5.10.61 kernel and fixes are minimal:
[...]
I use hand kernel configuration. |
What do you mean by that ? @figueroa asked before, if you did a "make oldconfig". Maybe you edited the .config file directly ? If this is true: Dont do this !
I am testing almost every minor version of 5.10 and I can tell you: 5.10.76-r1 is rock solid and stable ... IF you make the update correct:
1. Copy your old .config into the new kernel sources, and
2. then do a "make oldconfig" AND ANSWER all questions (I recommend to say "Y" to GCC_PLUGIN/Gentoo/KSSP settings you dont have in your config ... so maybe there was never a "make oldconfig" ...)
3. After that do your normal "make -j XX" and the rest |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sat Nov 13, 2021 10:16 pm Post subject: |
|
|
| pietinger wrote: | | janbielanski wrote: | Yes i copy config from 5.10.61 kernel and fixes are minimal:
[...]
I use hand kernel configuration. |
What do you mean by that ? @figueroa asked before, if you did a "make oldconfig". Maybe you edited the .config file directly ? If this is true: Dont do this !
I am testing almost every minor version of 5.10 and I can tell you: 5.10.76-r1 is rock solid and stable ... IF you make the update correct:
1. Copy your old .config into the new kernel sources, and
2. then do a "make oldconfig" AND ANSWER all questions (I recommend to say "Y" to Gentoo/KSSP settings you dont have in your config ... so maybe there was never a "make oldconfig" ...) |
1. Copy old ".config" file to new kernel directory
2. Run "make menuconfig" with new config and save changes
3. Finally kernel build |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5358
Location: Bavaria
|
| Posted: Sat Nov 13, 2021 10:22 pm Post subject: |
|
|
| janbielanski wrote: | 1. Copy old ".config" file to new kernel directory
2. Run "make menuconfig" with new config and save changes
3. Finally kernel build |
Its always better to do ONE change at a time, so:
1. cp .config ...
2. make oldconfig and answer questions
3. build kernel
4. reboot
5. check new kernel version
6. make menuconfig and change new settings
7. build kernel
8. reboot
9. check new kernel settings
I can recommend this from@mike155:
https://forums.gentoo.org/viewtopic-p-8517143.html#8517143 |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54801
Location: 56N 3W
|
| Posted: Sat Nov 13, 2021 10:22 pm Post subject: |
|
|
janbielanski,
| Quote: | 1. Copy old ".config" file to new kernel directory
2. Run "make menuconfig" with new config and save changes |
That sets new configuration options to their default values, which is not always what you want.
allows you to choose the settings for new options.
You can still run make menuconfig if you want to.
Over the years there have been some 'odd' choices for default options.
-- edit --
Some kernel drivers are in several parts, like the kernel code and firmware.
When the code initialises, it will try to find all the parts. e.g. load firmware.
In turn that means all the parts need to be in the same place, be it the kernel, the initrd or the root filesystem.
Mixing and matching fails because not all the bits can be found.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
dmpogo
Advocate
Joined: 02 Sep 2004
Posts: 3468
Location: Canada
|
| Posted: Sun Nov 14, 2021 7:35 am Post subject: |
|
|
What I see is that
1)
probably what got you the touchpad. That option is there in earlier kernels
2) You converted bunch of sound related parameters from modules to built-in. Sound subsystem is the one I usually keep as modules (I guess some times ago it used to hang and module reload was helping, so I am used to that setup).
Can you go back having them as modules ? |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sun Nov 14, 2021 2:04 pm Post subject: |
|
|
I change audio configuration to version based on modules:
| Code: |
< CONFIG_SND_HDA_EXT_CORE=m
< CONFIG_SND_SOC_ACPI=m
< CONFIG_SND_DESIGNWARE_I2S=m
< CONFIG_SND_SOC_INTEL_SST=m
< CONFIG_SND_SOC_INTEL_CML_H=m
< CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m
< CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m
< CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
< CONFIG_SND_SOC_HDAC_HDA=m
|
After this fixes everything works fine for kernel 5.10.61-gentoo. But when try to use this kernel config for new stable kernel 5.10.76-r1 then I got the same problems:
- the system hang during reboot or poweroff
- audio system not working
I load this config using the way suggested in comments above. Fortunately now everything works in kernel 5.10.61-gentoo and I don't needs update it
to newer 5.10.76-r1. Despite that I leave topic opened for a time when I will find what make a problems in new kernel. |
|
| Back to top |
|
|
acmondor
n00b
Joined: 08 Aug 2014
Posts: 65
Location: Canadian Prairies
|
| Posted: Sun Nov 14, 2021 2:38 pm Post subject: |
|
|
| janbielanski wrote: |
2. System hang during reboot / poweroff / halt
When I try to switch off or reboot system, the procedure hang:
| Code: | * Killing remaining processes ...
* Saving dependency cache ...
* Remounting remaining filesystems read-only ...
* Remounting / read only ...
* failed because we are using /
* ERROR: mount-ro failed to start |
system hang in this place.
|
I've noticed that trying to shutdown or reboot a system too quickly after boot causes the system to hang as you described. I initially thought it was due to an upgrade, but it seemed more like there was an init process of some sort still running that couldn't be stopped. I didn't investigate it much further, but instead always make sure the system is fully initiallized before doing a shutdown or reboot and it hasn't hung up since. Could that be what you are seeing? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54801
Location: 56N 3W
|
| Posted: Sun Nov 14, 2021 4:09 pm Post subject: |
|
|
janbielanski,
A pastebin of your dmesg would be useful.
When you change working sound beteween built in and loadable modules, you also need to change the CODEC options to match, as the CODECS you want to use need to be available when the rest of the kernel sound driver is initialised.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 3007
Location: Edge of marsh USA
|
| Posted: Mon Nov 15, 2021 1:18 am Post subject: |
|
|
| pietinger wrote: | ...
I am testing almost every minor version of 5.10 and I can tell you: 5.10.76-r1 is rock solid and stable ... IF you make the update correct:
... |
It had been my intention to stick like glue to the gentoo-sources 5.4 series stable releases, and I've been happy with it, but because of your comment, and having read many negative anecdotes about 5.10 series issues, I took the plunge, at least on a trial basis, and just finished building and installing 5.10.76-r1, and have rebooted.
It was very intimidating going through the surprisingly long list presented during make oldconfig. I pressed ? fairly often and made the best choices I could make, also accepting the KSPP item that you recommended. It was also good to see the zstd compression option, which I accepted.
Boot, and running on the desktop appear to be uneventful. No errors in /var/log/boot or /var/log/rc.log. There is a curious and new (non)error in dmesg which I'll eventually figure out. I have the pcspkr configured mainly for old time's sake. I don't even know if I really have a motherboard speaker.
| Code: | $ dmesg | grep pcspkr
[Sun Nov 14 19:36:11 2021] input: PC Speaker as /devices/platform/pcspkr/input/input2
[Sun Nov 14 19:36:18 2021] Error: Driver 'pcspkr' is already registered, aborting... |
Everything works; I think I'll keep it.
This suggests that 5.10.76-r1 may not be buggy at the core. A more careful migration from 5.10.61 to 5.10.76-r1 may resolve the issues at hand.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sun Nov 21, 2021 3:40 pm Post subject: |
|
|
I migrate config file from kernel 5.10.61 to 5.10.76 using:
and I got following differences:
3c3
< # Linux/x86 5.10.76-gentoo-r1 Kernel Configuration
---
> # Linux/x86 5.10.61-gentoo Kernel Configuration
| Code: | 761,764d760
< CONFIG_GCC_PLUGINS=y
< CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
< CONFIG_GCC_PLUGIN_RANDSTRUCT=y
< CONFIG_GCC_PLUGIN_RANDSTRUCT_PERFORMANCE=y
773,774c769
< CONFIG_MODVERSIONS=y
< CONFIG_ASM_MODVERSIONS=y
---
> # CONFIG_MODVERSIONS is not set
5572d5566
< CONFIG_GCC_PLUGIN_STRUCTLEAK=y
5577,5585c5571
< # CONFIG_INIT_STACK_NONE is not set
< CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y
< # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
< # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
< CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE=y
< CONFIG_GCC_PLUGIN_STACKLEAK=y
< CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
< CONFIG_STACKLEAK_METRICS=y
< CONFIG_STACKLEAK_RUNTIME_DISABLE=y
---
> CONFIG_INIT_STACK_NONE=y |
AUDIO PROBLEM - with kernel 5.10.76-gentoo-r1:
-> Correct audio detection DMESG 5.10.61:
| Code: | [ 5.602072] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.607635] hdaudio hdaudioC0D0: Unable to bind the codec
[ 7.284165] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 7.284169] sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 7.284177] sof-audio-pci 0000:00:1f.3: enabling device (0000 -> 0002)
[ 7.285425] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 7.285511] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff8c4baca0)
[ 7.292163] sof-audio-pci 0000:00:1f.3: use msi interrupt mode
[ 7.307842] sof-audio-pci 0000:00:1f.3: hda codecs found, mask 5
[ 7.307844] sof-audio-pci 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 7.307847] sof-audio-pci 0000:00:1f.3: DMICs detected in NHLT tables: 4
[ 7.428937] sof-audio-pci 0000:00:1f.3: Firmware info: version 1:6:1-53680
[ 7.428938] sof-audio-pci 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:17:0
[ 7.431682] sof-audio-pci 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:17:0
[ 7.449044] sof-audio-pci 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred
[ 7.468378] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 7.468378] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.468379] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.468379] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
[ 7.468380] snd_hda_codec_realtek ehdaudio0D0: inputs:
[ 7.468380] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19
[ 7.613967] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[ 7.613980] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten |
-> Incorrect audio detection DMESG 5.10.76:
| Code: | [ 5.665859] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.545238] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 7.545241] sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 7.545256] sof-audio-pci 0000:00:1f.3: enabling device (0000 -> 0002)
[ 7.545390] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 7.545442] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff920bae20)
[ 7.551868] sof-audio-pci 0000:00:1f.3: use msi interrupt mode
[ 7.655904] Modules linked in: snd_hda_codec_generic(+) i2c_designware_platform snd_soc_dmic mei_wdt rtsx_pci_sdmmc i2c_designware_core watchdog mei_hdcp mmc_core hp_wmi intel_wmi_thunderbolt wmi_bmof x86_pkg_temp_thermal intel_powerclamp snd_sof_pci snd_sof_intel_hda_common kvm_intel snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof kvm ledtrig_audio iwlmvm(+) irqbypass snd_soc_skl snd_soc_acpi_intel_match snd_soc_acpi snd_soc_hdac_hda serio_raw snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_hda_codec_hdmi rtsx_pci iwlwifi intel_lpss_pci mei_me intel_ish_ipc(+) xhci_pci processor_thermal_device mei intel_lpss intel_soc_dts_iosf intel_ishtp xhci_pci_renesas mfd_core intel_pch_thermal ucsi_acpi(+) typec_ucsi wmi i2c_hid int3403_thermal(+) int340x_thermal_zone hp_accel(+) pinctrl_cannonlake lis3lv02d pinctrl_intel int3400_thermal acpi_thermal_rel efivarfs
[ 7.696518] udevd[2468]: worker [2504] failed while handling '/devices/pci0000:00/0000:00:1f.3/ehdaudio0D0' |
REBOOT/SHUTDOWN SYTEM HANG - with kernel 5.10.76-gentoo-r1:
-> Correct system shutdown RC.LOG 5.10.61:
| Code: | rc shutdown logging started at Sun Nov 21 16:13:23 2021
* Stopping local ...
[ ok ]
* Saving random seed ...
[ ok ]
* Stopping teamviewerd ...
[ ok ]
* Stopping sshd ...
[ ok ]
* Stopping cronie ...
[ ok ]
* Storing ALSA Mixer Levels ...
[ ok ]
* Stopping lightdm ...
[ ok ]
* Stopping gpm ...
[ ok ]
* Stopping dbus ...
[ ok ]
* Stopping acpid ...
[ ok ]
* Unmounting loop devices
* Unmounting filesystems
* Unmounting /mnt/ramdisk ...
[ ok ]
* Unmounting /mnt/SHARED_DATA ...
[ ok ]
* Unmounting /mnt/WINDOWS ...
[ ok ]
* Unmounting /boot ...
[ ok ]
* Deactivating swap devices ...
[ ok ]
* Setting hardware clock using the system clock [Local Time] ...
[ ok ]
* Stopping udev ...
[ ok ]
rc shutdown logging stopped at Sun Nov 21 16:13:25 2021
rc shutdown logging started at Sun Nov 21 16:13:23 2021
* Stopping local ...
[ ok ]
* Saving random seed ...
[ ok ]
* Stopping teamviewerd ...
[ ok ]
* Stopping sshd ...
[ ok ]
* Stopping cronie ...
[ ok ]
* Storing ALSA Mixer Levels ...
[ ok ]
* Stopping lightdm ...
[ ok ]
* Stopping gpm ...
[ ok ]
* Stopping dbus ...
[ ok ]
* Stopping acpid ...
[ ok ]
* Unmounting loop devices
* Unmounting filesystems
* Unmounting /mnt/ramdisk ...
[ ok ]
* Unmounting /mnt/SHARED_DATA ...
[ ok ]
* Unmounting /mnt/WINDOWS ...
[ ok ]
* Unmounting /boot ...
[ ok ]
* Deactivating swap devices ...
[ ok ]
* Setting hardware clock using the system clock [Local Time] ...
[ ok ]
* Stopping udev ...
[ ok ]
rc shutdown logging stopped at Sun Nov 21 16:13:25 2021 |
-> Incorrect system shudown RC.LOG 5.10.76:
| Code: | rc shutdown logging started at Sun Nov 21 16:20:58 2021
* Stopping local ...
[ ok ]
* Saving random seed ...
[ ok ]
* Stopping teamviewerd ...
[ ok ]
* Stopping sshd ...
[ ok ]
* Stopping cronie ...
[ ok ]
* Storing ALSA Mixer Levels ...
alsactl: save_state:1595: No soundcards found...
* Error saving levels.
[ !! ]
* Stopping lightdm ...
[ ok ]
* Stopping gpm ...
[ ok ]
* Stopping dbus ...
[ ok ]
* Stopping acpid ...
[ ok ]
* Unmounting loop devices
* Unmounting filesystems
* Unmounting /run/user/1000 ...
[ ok ]
* Unmounting /mnt/ramdisk ...
[ ok ]
* Unmounting /mnt/SHARED_DATA ...
[ ok ]
* Unmounting /mnt/WINDOWS ...
[ ok ]
* Unmounting /boot ...
[ ok ]
* Deactivating swap devices ...
[ ok ]
* Setting hardware clock using the system clock [Local Time] ...
[ ok ]
* Stopping udev ...
[ ok ]
rc shutdown logging stopped at Sun Nov 21 16:21:30 2021 |
in logs I got only that and I need to poweroff system manually. |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sun Nov 21, 2021 3:49 pm Post subject: |
|
|
| My kernel config file: 5.10.61. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54801
Location: 56N 3W
|
| Posted: Sun Nov 21, 2021 8:28 pm Post subject: |
|
|
janbielanski,
Google wants me to sign in. That's not going to happen.
Please use a pastebin.
makes that easy.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Sun Nov 21, 2021 10:50 pm Post subject: |
|
|
| My kernel config 5.10.61 config file |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54801
Location: 56N 3W
|
| Posted: Sun Nov 21, 2021 11:55 pm Post subject: |
|
|
janbielanski,
Your kernel configuration is broken.
might be OK but in combination with | Code: | | CONFIG_SND_HDA_CODEC_*=m |
it cannot work by design.
CONFIG_SND_HDA and CONFIG_SND_HDA_CODEC_* must all be =y or =m.
When SND_HDA initialises, it needs all of its parts too. Here the codecs.
Other places its the kernel driver and firmware.
Make the CODECS built in and it will work.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Mon Nov 22, 2021 12:00 am Post subject: |
|
|
| Thank you, I checked it. Still I don't know why in kernel 5.10.61 but in kernel 5.10.76 not, if config is broken than it shouldn't work in both kernels. |
|
| Back to top |
|
|
janbielanski
n00b
Joined: 06 Jul 2019
Posts: 32
Location: Krakow
|
| Posted: Mon Nov 22, 2021 12:40 am Post subject: |
|
|
| NeddySeagoon wrote: | janbielanski,
Your kernel configuration is broken.
might be OK but in combination with | Code: | | CONFIG_SND_HDA_CODEC_*=m |
it cannot work by design.
CONFIG_SND_HDA and CONFIG_SND_HDA_CODEC_* must all be =y or =m.
When SND_HDA initialises, it needs all of its parts too. Here the codecs.
Other places its the kernel driver and firmware.
Make the CODECS built in and it will work. |
This was a problem, I build all SND and ALSA configs as module and it solve all problems.
PROBLEMS SOLVED, thank you!!! |
|
| Back to top |
|
|
|
Kernel & Hardware
