| View previous topic :: View next topic |
| Author |
Message |
spinerr
n00b
Joined: 16 Jun 2010
Posts: 43
|
 Posted: Sat Oct 09, 2021 2:28 pm Post subject: libnotify.so.1 czy da się dodać do gentoo? |
 |
|
Teraz jest "libnotify.so.4" a ja potrzebuję libnotify.so.1 dla sterownika do karty 3dsp by alamot. Da się?
Prosta kompilacja libnotify-0.4.5 i skopiowanie pliku symlinka libnotify.so.1 i biblioteki libnotify.so.1.1.3 do /usr/libs daje tylko errory.
Gentoo na kernelu 4.0.5 a więc okolice ~2015
próba emerge
| Code: |
emerge -av =x11-libs/libnotify-0.4.5
!!! SYNC setting found in make.conf.
This setting is Deprecated and no longer used. Please ensure your 'sync-type' and 'sync-uri' are set correctly in /etc/portage/repos.conf/gentoo.conf
* IMPORTANT: 33 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
* Last emerge --sync was nie, 12 lip 2015, 18:05:01.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild UD ] x11-libs/libnotify-0.4.5::gentoo [0.7.6-r1::gentoo] USE="(-introspection%*) (-test%)" 0 KiB
[blocks B ] <x11-libs/libnotify-0.7.5-r1 ("<x11-libs/libnotify-0.7.5-r1" is blocking app-eselect/eselect-notify-send-0.1)
Total: 1 package (1 downgrade), Size of downloads: 0 KiB
Conflict: 1 block (1 unsatisfied)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
x11-libs/libnotify:0
(x11-libs/libnotify-0.4.5:0/0::gentoo, ebuild scheduled for merge) pulled in by
=x11-libs/libnotify-0.4.5 (Argument)
(x11-libs/libnotify-0.7.6-r1:0/0::gentoo, installed) pulled in by
x11-libs/libnotify[introspection] required by (app-cdr/gcdemu-3.0.0:0/0::gentoo, installed)
^^^^^^^^^^^^^
>=x11-libs/libnotify-0.7.0 required by (gnome-extra/nm-applet-1.0.2:0/0::gentoo, installed)
^^ ^^^^^
(and 11 more with the same problems)
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously. You may want to try a larger value of
the --backtrack option, such as --backtrack=30, in order to see if
that will solve this conflict automatically.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(app-eselect/eselect-notify-send-0.1:0/0::gentoo, installed) pulled in by
app-eselect/eselect-notify-send required by (x11-libs/libnotify-0.7.6-r1:0/0::gentoo, installed)
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages
|
|
|
| Back to top |
|
 |
spinerr
n00b
Joined: 16 Jun 2010
Posts: 43
|
| Posted: Sat Oct 09, 2021 8:05 pm Post subject: |
|
|
dobra nieważne, ten sterownik (alamot 3dsp) trzeba by przepisać na nowo. W pliku Install....sh wystarczy zaremować te linijki z wyjściami (funkcje PRINTOFF i PRINTSTD) i wychodzi jak te sterowniki cudownie działają:
| Code: |
cp -f wlan/3dspusbwlan.ko /usr/local/3DSP/usb/
cp -f private/new_bluetooth_priv/3dspusbbtpriv.ko /usr/local/3DSP/usb/
cp -f private/wlan_priv/3dspusbwlanpriv.ko /usr/local/3DSP/usb/
cp -f tdspusbcardinit /etc/init.d/
chmod 755 /etc/init.d/tdspusbcardinit
Inserting modules...
insmod /usr/local/3DSP/usb/3dspusbbus.ko
insmod /usr/local/3DSP/usb/3dspusbwlanpriv.ko
insmod: ERROR: could not insert module /usr/local/3DSP/usb/3dspusbwlanpriv.ko: Unknown symbol in module
Makefile:36: polecenia dla obiektu 'install' nie powiodły się
make: [install] Błąd 1 (zignorowano)
insmod /usr/local/3DSP/usb/3dspusbwlan.ko
insmod: ERROR: could not insert module /usr/local/3DSP/usb/3dspusbwlan.ko: Unknown symbol in module
Makefile:36: polecenia dla obiektu 'install' nie powiodły się
make: [install] Błąd 1 (zignorowano)
insmod /usr/local/3DSP/usb/3dspusbbtpriv.ko
insmod: ERROR: could not insert module /usr/local/3DSP/usb/3dspusbbtpriv.ko: Unknown symbol in module
Makefile:36: polecenia dla obiektu 'install' nie powiodły się
make: [install] Błąd 1 (zignorowano)
insmod /usr/local/3DSP/usb/3dspusbbt.ko
insmod: ERROR: could not insert module /usr/local/3DSP/usb/3dspusbbt.ko: Unknown symbol in module
Makefile:36: polecenia dla obiektu 'install' nie powiodły się
make: [install] Błąd 1 (zignorowano)
|
Żaden moduł się nie załadował, error za errorem |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish)
