| View previous topic :: View next topic |
| Author |
Message |
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
 Posted: Mon Oct 17, 2022 5:41 am Post subject: [SOLVED] startx failure |
 |
|
Whenever I try startx, it would not be able to open the i965 driver. It says it's not there but I checked the directory and it's there. It also brings up errors with xkb.
Xorg.0.log
| Code: |
[ 877.346] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 877.346] (==) Automatically adding devices
[ 877.346] (==) Automatically enabling devices
[ 877.346] (==) Automatically adding GPU devices
[ 877.346] (==) Automatically binding GPU devices
[ 877.346] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 877.368] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 877.368] Entry deleted from font path.
[ 877.368] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 877.368] Entry deleted from font path.
[ 877.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 877.368] Entry deleted from font path.
[ 877.368] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 877.369] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 877.370] Entry deleted from font path.
[ 877.370] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 877.370] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 877.370] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 877.370] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 877.370] (II) Module ABI versions:
[ 877.370] X.Org ANSI C Emulation: 0.4
[ 877.370] X.Org Video Driver: 25.2
[ 877.370] X.Org XInput driver : 24.4
[ 877.370] X.Org Server Extension : 10.0
[ 877.372] (++) using VT number 1
[ 877.375] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 877.378] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 877.378] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 877.379] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 877.386] (--) PCI:*(0@0:2:0) 8086:0126:17aa:21da rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 877.386] (II) LoadModule: "glx"
[ 877.402] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 877.493] (II) Module glx: vendor="X.Org Foundation"
[ 877.493] compiled for 1.21.1.4, module version = 1.0.0
[ 877.493] ABI class: X.Org Server Extension, version 10.0
[ 877.493] (==) Matched intel as autoconfigured driver 0
[ 877.493] (==) Matched modesetting as autoconfigured driver 1
[ 877.493] (==) Matched fbdev as autoconfigured driver 2
[ 877.493] (==) Matched vesa as autoconfigured driver 3
[ 877.493] (==) Assigned the driver to the xf86ConfigLayout
[ 877.493] (II) LoadModule: "intel"
[ 877.511] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 877.543] (II) Module intel: vendor="X.Org Foundation"
[ 877.543] compiled for 1.21.1.4, module version = 2.99.917
[ 877.543] Module class: X.Org Video Driver
[ 877.543] ABI class: X.Org Video Driver, version 25.2
[ 877.543] (II) LoadModule: "modesetting"
[ 877.543] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 877.578] (II) Module modesetting: vendor="X.Org Foundation"
[ 877.578] compiled for 1.21.1.4, module version = 1.21.1
[ 877.578] Module class: X.Org Video Driver
[ 877.578] ABI class: X.Org Video Driver, version 25.2
[ 877.578] (II) LoadModule: "fbdev"
[ 877.597] (WW) Warning, couldn't open module fbdev
[ 877.597] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 877.597] (II) LoadModule: "vesa"
[ 877.598] (WW) Warning, couldn't open module vesa
[ 877.598] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 877.598] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 877.598] (II) intel: Driver for Intel(R) HD Graphics
[ 877.598] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 877.598] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 877.598] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 877.599] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 877.599] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 877.616] (WW) Falling back to old probe method for modesetting
[ 877.617] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 877.618] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 877.618] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 877.618] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 877.618] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 877.618] (==) intel(0): RGB weight 888
[ 877.618] (==) intel(0): Default visual is TrueColor
[ 877.619] (II) intel(0): Output LVDS1 has no monitor section
[ 877.620] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 877.620] (II) intel(0): Enabled output LVDS1
[ 877.620] (II) intel(0): Output VGA1 has no monitor section
[ 877.620] (II) intel(0): Enabled output VGA1
[ 877.620] (II) intel(0): Output HDMI1 has no monitor section
[ 877.621] (II) intel(0): Enabled output HDMI1
[ 877.621] (II) intel(0): Output DP1 has no monitor section
[ 877.621] (II) intel(0): Enabled output DP1
[ 877.621] (II) intel(0): Output HDMI2 has no monitor section
[ 877.622] (II) intel(0): Enabled output HDMI2
[ 877.622] (II) intel(0): Output HDMI3 has no monitor section
[ 877.622] (II) intel(0): Enabled output HDMI3
[ 877.622] (II) intel(0): Output DP2 has no monitor section
[ 877.622] (II) intel(0): Enabled output DP2
[ 877.622] (II) intel(0): Output DP3 has no monitor section
[ 877.623] (II) intel(0): Enabled output DP3
[ 877.623] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 877.623] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 877.623] (II) intel(0): Enabled output VIRTUAL1
[ 877.623] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 877.624] (==) intel(0): TearFree disabled
[ 877.624] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 877.624] (==) intel(0): DPI set to (96, 96)
[ 877.624] (II) Loading sub module "dri3"
[ 877.624] (II) LoadModule: "dri3"
[ 877.624] (II) Module "dri3" already built-in
[ 877.624] (II) Loading sub module "dri2"
[ 877.624] (II) LoadModule: "dri2"
[ 877.624] (II) Module "dri2" already built-in
[ 877.624] (II) Loading sub module "present"
[ 877.624] (II) LoadModule: "present"
[ 877.624] (II) Module "present" already built-in
[ 877.624] (II) UnloadModule: "modesetting"
[ 877.624] (II) Unloading modesetting
[ 877.664] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 877.664] (==) intel(0): Backing store enabled
[ 877.664] (==) intel(0): Silken mouse enabled
[ 877.664] (II) intel(0): HW Cursor enabled
[ 877.665] (==) intel(0): DPMS enabled
[ 877.665] (==) intel(0): Display hotplug detection enabled
[ 877.665] (II) intel(0): [DRI2] Setup complete
[ 877.666] (II) intel(0): [DRI2] DRI driver: i965
[ 877.666] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 877.666] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 877.666] (II) intel(0): hardware support for Present enabled
[ 877.666] (II) Initializing extension Generic Event Extension
[ 877.666] (II) Initializing extension SHAPE
[ 877.666] (II) Initializing extension MIT-SHM
[ 877.666] (II) Initializing extension XInputExtension
[ 877.667] (II) Initializing extension XTEST
[ 877.667] (II) Initializing extension BIG-REQUESTS
[ 877.667] (II) Initializing extension SYNC
[ 877.667] (II) Initializing extension XKEYBOARD
[ 877.667] (II) Initializing extension XC-MISC
[ 877.667] (II) Initializing extension XFIXES
[ 877.667] (II) Initializing extension RENDER
[ 877.667] (II) Initializing extension RANDR
[ 877.667] (II) Initializing extension COMPOSITE
[ 877.667] (II) Initializing extension DAMAGE
[ 877.667] (II) Initializing extension MIT-SCREEN-SAVER
[ 877.667] (II) Initializing extension DOUBLE-BUFFER
[ 877.667] (II) Initializing extension RECORD
[ 877.667] (II) Initializing extension DPMS
[ 877.667] (II) Initializing extension Present
[ 877.667] (II) Initializing extension DRI3
[ 877.667] (II) Initializing extension X-Resource
[ 877.667] (II) Initializing extension XVideo
[ 877.667] (II) Initializing extension XVideo-MotionCompensation
[ 877.667] (II) Initializing extension GLX
[ 877.694] (EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 877.694] (EE) AIGLX error: unable to load driver i965
[ 879.530] (II) IGLX: Loaded and initialized swrast
[ 879.530] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 879.530] (II) Initializing extension XFree86-VidModeExtension
[ 879.530] (II) Initializing extension XFree86-DGA
[ 879.530] (II) Initializing extension XFree86-DRI
[ 879.530] (II) Initializing extension DRI2
[ 879.554] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 879.564] (II) intel(0): Setting screen physical size to 361 x 203
[ 879.618] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[ 879.618] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 879.618] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[ 879.618] XKB: Failed to compile keymap
[ 879.618] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[ 879.618] (EE)
Fatal server error:
[ 879.618] (EE) Failed to activate virtual core keyboard: 2(EE)
[ 879.618] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 879.618] (EE) Please also check the log file at "/home/lain/.local/share/xorg/Xorg.0.log" for additional information.
[ 879.618] (EE)
[ 879.674] (EE) Server terminated with error (1). Closing log file.
|
make.conf
| Code: |
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
COMMON_FLAGS="-march=native -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
# NOTE: This stage was built with the bindist Use flag enabled
PORTDIR="/var/db/repos/gentoo"
DISTDIR="/var/cache/distfiles"
PKGDIR="/var/cache/binpkgs"
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C
# USE flags
USE="dbus font-styles intel xft wifi alsa pipewire X udev xinerama -gnome -kde -plasma networkmanager wireless ncurses xorg elogind -systemd -amdgpu"
# License Agreement
ACCEPT_LICENSE="*"
# GRUB_PLATFORMS
GRUB_PLATFORMS="pc"
# VIDEO CARDS
VIDEO_CARDS="intel i915"
|
.xinitrc
| Code: |
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/Xresources
sysmodmap=/etc/X11/xinit/Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -n "`/etc/X11/chooser.sh`" ]; then
command="`/etc/X11/chooser.sh`"
else
failsafe="yes"
fi
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/?* ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# dwm
exec dwm &
if [ -n "$failsafe" ]; then
twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login
else
exec $command
fi
|
xorg.conf.d is empty and there was no xorg.conf.example.bz2 to be found in /usr/share/doc/xorg-server-21.1.4.
Last edited by n2kia on Mon Oct 17, 2022 2:07 pm; edited 2 times in total |
|
| Back to top |
|
 |
mike155
Advocate
Joined: 17 Sep 2010
Posts: 4438
Location: Frankfurt, Germany
|
| Posted: Mon Oct 17, 2022 10:29 am Post subject: |
|
|
| Code: | [ 879.618] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[ 879.618] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 879.618] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[ 879.618] XKB: Failed to compile keymap |
File /usr/share/X11/xkb/rules/evdev is provided by x11-misc/xkeyboard-config.
Are the packages below installed on your machine?
- x11-apps/setxkbmap
- x11-misc/xkeyboard-config
Does the file /usr/share/X11/xkb/rules/evdev exist? |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4244
Location: Bavaria
|
| Posted: Mon Oct 17, 2022 11:11 am Post subject: |
|
|
n2kia,
Welcome to Gentoo Forums !
Ignore the error about your graphics card (it is normal); you have a problem with your keyboard.
You are missing in your make.conf this line:
| Code: | | INPUT_DEVICES="libinput" |
After this do an "emerge -uNDv @world" and start again X11. What happens then ? |
|
| Back to top |
|
|
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
| Posted: Mon Oct 17, 2022 11:11 am Post subject: |
|
|
| mike155 wrote: |
File /usr/share/X11/xkb/rules/evdev is provided by x11-misc/xkeyboard-config.
Are the packages below installed on your machine?
- x11-apps/setxkbmap
- x11-misc/xkeyboard-config
Does the file /usr/share/X11/xkb/rules/evdev exist? |
Thank you, I emerged both packages and that solved that issue.
Unfortunately, I still cannot startx due to the whole AIGLX dlopen issue... |
|
| Back to top |
|
|
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
| Posted: Mon Oct 17, 2022 11:39 am Post subject: |
|
|
| pietinger wrote: | n2kia,
Welcome to Gentoo Forums ! |
Hello! 
| pietinger wrote: | You are missing in your make.conf this line:
| Code: | | INPUT_DEVICES="libinput" |
After this do an "emerge -uNDv @world" and start again X11. What happens then ? |
I added the INPUT_DEVICES="libinput" line to my make.conf, ran the emerge command as you said, and startx still failed unfortunately.
Xorg.0.log
| Code: | [ 244.111]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 244.114] Current Operating System: Linux copelandOS 5.15.72-gentoo-dist #1 SMP Wed Oct 5 17:08:18 -00 2022 x86_64
[ 244.114] Kernel command line: BOOT_IMAGE=/vmlinuz-5.15.72-gentoo-dist root=UUID=a78c32a6-a1f6-4927-941f-8e4f2eb16c0f ro
[ 244.115]
[ 244.116] Current version of pixman: 0.40.0
[ 244.118] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 244.118] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 244.121] (==) Log file: "/home/lain/.local/share/xorg/Xorg.0.log", Time: Mon Oct 17 04:22:20 2022
[ 244.178] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 244.209] (==) No Layout section. Using the first Screen section.
[ 244.209] (==) No screen section available. Using defaults.
[ 244.209] (**) |-->Screen "Default Screen Section" (0)
[ 244.209] (**) | |-->Monitor "<default monitor>"
[ 244.210] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 244.210] (==) Automatically adding devices
[ 244.210] (==) Automatically enabling devices
[ 244.210] (==) Automatically adding GPU devices
[ 244.210] (==) Automatically binding GPU devices
[ 244.210] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 244.231] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 244.231] Entry deleted from font path.
[ 244.231] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 244.231] Entry deleted from font path.
[ 244.231] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 244.232] Entry deleted from font path.
[ 244.232] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 244.233] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 244.233] Entry deleted from font path.
[ 244.233] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 244.233] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 244.233] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 244.233] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 244.233] (II) Module ABI versions:
[ 244.233] X.Org ANSI C Emulation: 0.4
[ 244.233] X.Org Video Driver: 25.2
[ 244.233] X.Org XInput driver : 24.4
[ 244.233] X.Org Server Extension : 10.0
[ 244.235] (++) using VT number 1
[ 244.239] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 244.240] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 244.240] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 244.241] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 244.243] (--) PCI:*(0@0:2:0) 8086:0126:17aa:21da rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 244.243] (II) LoadModule: "glx"
[ 244.273] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 244.367] (II) Module glx: vendor="X.Org Foundation"
[ 244.367] compiled for 1.21.1.4, module version = 1.0.0
[ 244.367] ABI class: X.Org Server Extension, version 10.0
[ 244.367] (==) Matched intel as autoconfigured driver 0
[ 244.367] (==) Matched modesetting as autoconfigured driver 1
[ 244.367] (==) Matched fbdev as autoconfigured driver 2
[ 244.367] (==) Matched vesa as autoconfigured driver 3
[ 244.367] (==) Assigned the driver to the xf86ConfigLayout
[ 244.367] (II) LoadModule: "intel"
[ 244.386] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 244.418] (II) Module intel: vendor="X.Org Foundation"
[ 244.418] compiled for 1.21.1.4, module version = 2.99.917
[ 244.418] Module class: X.Org Video Driver
[ 244.418] ABI class: X.Org Video Driver, version 25.2
[ 244.418] (II) LoadModule: "modesetting"
[ 244.418] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 244.453] (II) Module modesetting: vendor="X.Org Foundation"
[ 244.453] compiled for 1.21.1.4, module version = 1.21.1
[ 244.453] Module class: X.Org Video Driver
[ 244.453] ABI class: X.Org Video Driver, version 25.2
[ 244.453] (II) LoadModule: "fbdev"
[ 244.472] (WW) Warning, couldn't open module fbdev
[ 244.472] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 244.472] (II) LoadModule: "vesa"
[ 244.472] (WW) Warning, couldn't open module vesa
[ 244.472] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 244.473] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 244.473] (II) intel: Driver for Intel(R) HD Graphics
[ 244.473] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 244.473] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 244.473] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 244.473] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 244.474] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 244.490] (WW) Falling back to old probe method for modesetting
[ 244.490] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 244.491] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 244.491] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 244.491] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 244.491] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 244.491] (==) intel(0): RGB weight 888
[ 244.491] (==) intel(0): Default visual is TrueColor
[ 244.493] (II) intel(0): Output LVDS1 has no monitor section
[ 244.494] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 244.494] (II) intel(0): Enabled output LVDS1
[ 244.494] (II) intel(0): Output VGA1 has no monitor section
[ 244.494] (II) intel(0): Enabled output VGA1
[ 244.494] (II) intel(0): Output HDMI1 has no monitor section
[ 244.494] (II) intel(0): Enabled output HDMI1
[ 244.494] (II) intel(0): Output DP1 has no monitor section
[ 244.495] (II) intel(0): Enabled output DP1
[ 244.495] (II) intel(0): Output HDMI2 has no monitor section
[ 244.495] (II) intel(0): Enabled output HDMI2
[ 244.495] (II) intel(0): Output HDMI3 has no monitor section
[ 244.496] (II) intel(0): Enabled output HDMI3
[ 244.496] (II) intel(0): Output DP2 has no monitor section
[ 244.496] (II) intel(0): Enabled output DP2
[ 244.496] (II) intel(0): Output DP3 has no monitor section
[ 244.496] (II) intel(0): Enabled output DP3
[ 244.496] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 244.497] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 244.497] (II) intel(0): Enabled output VIRTUAL1
[ 244.497] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 244.497] (==) intel(0): TearFree disabled
[ 244.497] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 244.497] (==) intel(0): DPI set to (96, 96)
[ 244.497] (II) Loading sub module "dri3"
[ 244.497] (II) LoadModule: "dri3"
[ 244.498] (II) Module "dri3" already built-in
[ 244.498] (II) Loading sub module "dri2"
[ 244.498] (II) LoadModule: "dri2"
[ 244.498] (II) Module "dri2" already built-in
[ 244.498] (II) Loading sub module "present"
[ 244.498] (II) LoadModule: "present"
[ 244.498] (II) Module "present" already built-in
[ 244.498] (II) UnloadModule: "modesetting"
[ 244.498] (II) Unloading modesetting
[ 244.560] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 244.560] (==) intel(0): Backing store enabled
[ 244.561] (==) intel(0): Silken mouse enabled
[ 244.561] (II) intel(0): HW Cursor enabled
[ 244.562] (==) intel(0): DPMS enabled
[ 244.562] (==) intel(0): Display hotplug detection enabled
[ 244.562] (II) intel(0): [DRI2] Setup complete
[ 244.562] (II) intel(0): [DRI2] DRI driver: i965
[ 244.562] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 244.563] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 244.563] (II) intel(0): hardware support for Present enabled
[ 244.563] (II) Initializing extension Generic Event Extension
[ 244.563] (II) Initializing extension SHAPE
[ 244.563] (II) Initializing extension MIT-SHM
[ 244.563] (II) Initializing extension XInputExtension
[ 244.563] (II) Initializing extension XTEST
[ 244.563] (II) Initializing extension BIG-REQUESTS
[ 244.563] (II) Initializing extension SYNC
[ 244.563] (II) Initializing extension XKEYBOARD
[ 244.563] (II) Initializing extension XC-MISC
[ 244.563] (II) Initializing extension XFIXES
[ 244.563] (II) Initializing extension RENDER
[ 244.563] (II) Initializing extension RANDR
[ 244.563] (II) Initializing extension COMPOSITE
[ 244.563] (II) Initializing extension DAMAGE
[ 244.563] (II) Initializing extension MIT-SCREEN-SAVER
[ 244.563] (II) Initializing extension DOUBLE-BUFFER
[ 244.563] (II) Initializing extension RECORD
[ 244.563] (II) Initializing extension DPMS
[ 244.563] (II) Initializing extension Present
[ 244.563] (II) Initializing extension DRI3
[ 244.563] (II) Initializing extension X-Resource
[ 244.563] (II) Initializing extension XVideo
[ 244.563] (II) Initializing extension XVideo-MotionCompensation
[ 244.563] (II) Initializing extension GLX
[ 244.591] (EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 244.591] (EE) AIGLX error: unable to load driver i965
[ 246.414] (II) IGLX: Loaded and initialized swrast
[ 246.414] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 246.414] (II) Initializing extension XFree86-VidModeExtension
[ 246.414] (II) Initializing extension XFree86-DGA
[ 246.414] (II) Initializing extension XFree86-DRI
[ 246.414] (II) Initializing extension DRI2
[ 246.429] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 246.443] (II) intel(0): Setting screen physical size to 361 x 203
[ 246.856] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 246.857] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 246.857] (II) LoadModule: "libinput"
[ 246.857] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 246.903] (II) Module libinput: vendor="X.Org Foundation"
[ 246.903] compiled for 1.21.1.4, module version = 1.2.1
[ 246.903] Module class: X.Org XInput Driver
[ 246.903] ABI class: X.Org XInput driver, version 24.4
[ 246.903] (II) Using input driver 'libinput' for 'Power Button'
[ 246.905] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[ 246.905] (**) Power Button: always reports core events
[ 246.905] (**) Option "Device" "/dev/input/event2"
[ 246.930] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 246.930] (II) event2 - Power Button: device is a keyboard
[ 246.930] (II) event2 - Power Button: device removed
[ 246.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 246.930] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 246.931] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 246.931] (II) event2 - Power Button: device is a keyboard
[ 246.932] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 246.932] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 246.932] (II) Using input driver 'libinput' for 'Video Bus'
[ 246.933] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 23 paused 0
[ 246.933] (**) Video Bus: always reports core events
[ 246.933] (**) Option "Device" "/dev/input/event9"
[ 246.933] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 246.933] (II) event9 - Video Bus: device is a keyboard
[ 246.934] (II) event9 - Video Bus: device removed
[ 246.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 246.934] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 246.934] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 246.935] (II) event9 - Video Bus: device is a keyboard
[ 246.935] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 246.935] (II) No input driver specified, ignoring this device.
[ 246.935] (II) This device may have been added with another device file.
[ 246.935] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 246.935] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 246.935] (II) Using input driver 'libinput' for 'Sleep Button'
[ 246.936] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 246.936] (**) Sleep Button: always reports core events
[ 246.936] (**) Option "Device" "/dev/input/event1"
[ 246.937] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 246.937] (II) event1 - Sleep Button: device is a keyboard
[ 246.937] (II) event1 - Sleep Button: device removed
[ 246.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 246.937] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 246.938] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 246.938] (II) event1 - Sleep Button: device is a keyboard
[ 246.939] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event8)
[ 246.939] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 246.939] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 246.940] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 25 paused 0
[ 246.940] (**) Integrated Camera: Integrated C: always reports core events
[ 246.940] (**) Option "Device" "/dev/input/event8"
[ 246.941] (II) event8 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 246.941] (II) event8 - Integrated Camera: Integrated C: device is a keyboard
[ 246.942] (II) event8 - Integrated Camera: Integrated C: device removed
[ 246.942] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9/event8"
[ 246.942] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[ 246.943] (II) event8 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 246.943] (II) event8 - Integrated Camera: Integrated C: device is a keyboard
[ 246.943] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 246.943] (II) No input driver specified, ignoring this device.
[ 246.943] (II) This device may have been added with another device file.
[ 246.944] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[ 246.944] (II) No input driver specified, ignoring this device.
[ 246.944] (II) This device may have been added with another device file.
[ 246.944] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12)
[ 246.944] (II) No input driver specified, ignoring this device.
[ 246.944] (II) This device may have been added with another device file.
[ 246.944] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 246.944] (II) No input driver specified, ignoring this device.
[ 246.944] (II) This device may have been added with another device file.
[ 246.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 246.945] (II) No input driver specified, ignoring this device.
[ 246.945] (II) This device may have been added with another device file.
[ 246.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 246.945] (II) No input driver specified, ignoring this device.
[ 246.945] (II) This device may have been added with another device file.
[ 246.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 246.945] (II) No input driver specified, ignoring this device.
[ 246.945] (II) This device may have been added with another device file.
[ 246.946] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 246.946] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 246.946] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 246.946] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[ 246.947] (**) AT Translated Set 2 keyboard: always reports core events
[ 246.947] (**) Option "Device" "/dev/input/event3"
[ 246.947] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 246.948] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 246.948] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 246.948] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 246.948] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 246.949] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 246.949] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 246.950] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 246.950] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 246.950] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 246.951] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 246.951] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 246.951] (**) Option "Device" "/dev/input/event4"
[ 246.952] (II) event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 246.953] (II) event4 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 246.953] (II) event4 - SynPS/2 Synaptics TouchPad: device removed
[ 246.954] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 246.954] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 246.955] (**) Option "AccelerationScheme" "none"
[ 246.955] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 246.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 246.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 246.956] (II) event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 246.957] (II) event4 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 246.958] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 246.958] (II) No input driver specified, ignoring this device.
[ 246.958] (II) This device may have been added with another device file.
[ 246.958] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[ 246.958] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 246.958] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 246.959] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 28 paused 0
[ 246.959] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 246.959] (**) Option "Device" "/dev/input/event5"
[ 246.960] (II) event5 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 246.960] (II) event5 - TPPS/2 IBM TrackPoint: device is a pointer
[ 246.961] (II) event5 - TPPS/2 IBM TrackPoint: device removed
[ 246.961] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event5"
[ 246.961] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 246.961] (**) Option "AccelerationScheme" "none"
[ 246.961] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 246.961] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 246.961] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 246.962] (II) event5 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[ 246.962] (II) event5 - TPPS/2 IBM TrackPoint: device is a pointer
[ 246.964] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 246.964] (II) No input driver specified, ignoring this device.
[ 246.964] (II) This device may have been added with another device file.
[ 246.965] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 246.965] (II) No input driver specified, ignoring this device.
[ 246.965] (II) This device may have been added with another device file.
[ 246.969] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 246.969] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 246.969] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 246.969] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[ 246.969] (**) ThinkPad Extra Buttons: always reports core events
[ 246.969] (**) Option "Device" "/dev/input/event7"
[ 246.970] (II) event7 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 246.970] (II) event7 - ThinkPad Extra Buttons: device is a keyboard
[ 246.970] (II) event7 - ThinkPad Extra Buttons: device is a switch device
[ 246.970] (II) event7 - ThinkPad Extra Buttons: device removed
[ 246.970] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event7"
[ 246.970] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 246.971] (II) event7 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 246.971] (II) event7 - ThinkPad Extra Buttons: device is a keyboard
[ 246.971] (II) event7 - ThinkPad Extra Buttons: device is a switch device
[ 246.994] (II) intel(0): EDID vendor "AUO", prod id 4204
[ 246.994] (II) intel(0): Printing DDC gathered Modelines:
[ 246.994] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP)
[ 247.324] (**) Option "fd" "20"
[ 247.324] (II) event2 - Power Button: device removed
[ 247.325] (**) Option "fd" "23"
[ 247.325] (II) event9 - Video Bus: device removed
[ 247.325] (**) Option "fd" "24"
[ 247.325] (II) event1 - Sleep Button: device removed
[ 247.325] (**) Option "fd" "25"
[ 247.325] (II) event8 - Integrated Camera: Integrated C: device removed
[ 247.325] (**) Option "fd" "26"
[ 247.325] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 247.325] (**) Option "fd" "27"
[ 247.325] (II) event4 - SynPS/2 Synaptics TouchPad: device removed
[ 247.325] (**) Option "fd" "28"
[ 247.325] (II) event5 - TPPS/2 IBM TrackPoint: device removed
[ 247.325] (**) Option "fd" "29"
[ 247.325] (II) event7 - ThinkPad Extra Buttons: device removed
[ 247.325] (II) UnloadModule: "libinput"
[ 247.325] (II) systemd-logind: releasing fd for 13:71
[ 247.349] (II) UnloadModule: "libinput"
[ 247.349] (II) systemd-logind: releasing fd for 13:69
[ 247.386] (II) UnloadModule: "libinput"
[ 247.386] (II) systemd-logind: releasing fd for 13:68
[ 247.426] (II) UnloadModule: "libinput"
[ 247.426] (II) systemd-logind: releasing fd for 13:67
[ 247.446] (II) UnloadModule: "libinput"
[ 247.446] (II) systemd-logind: releasing fd for 13:72[/quote]
[ 247.483] (II) UnloadModule: "libinput"
[ 247.483] (II) systemd-logind: releasing fd for 13:65
[ 247.499] (II) UnloadModule: "libinput"
[ 247.499] (II) systemd-logind: releasing fd for 13:73
[ 247.547] (II) UnloadModule: "libinput"
[ 247.547] (II) systemd-logind: releasing fd for 13:66
[ 247.654] (II) Server terminated successfully (0). Closing log file.
|
|
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4244
Location: Bavaria
|
|
| Back to top |
|
|
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
| Posted: Mon Oct 17, 2022 12:20 pm Post subject: |
|
|
| Quote: | | This looks good ! (Really) |
Thank you.
I'm running startx from my user, lain. It's in the wheel, audio, video, and users groups. There is a .xinitrc file in it's home folder.
| Code: | #!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/Xresources
sysmodmap=/etc/X11/xinit/Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -n "`/etc/X11/chooser.sh`" ]; then
command="`/etc/X11/chooser.sh`"
else
failsafe="yes"
fi
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/?* ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# dwm
exec dwm &
if [ -n "$failsafe" ]; then
twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login
else
exec $command
fi |
Is it possible that the exec dwm line is in the wrong spot?
I tried running startx as root but that didn't work either... |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4244
Location: Bavaria
|
| Posted: Mon Oct 17, 2022 1:02 pm Post subject: |
|
|
| n2kia wrote: | | Is it possible that the exec dwm line is in the wrong spot? |
Sorry, I am no dwm expert. Our Gentoo Wiki says:
https://wiki.gentoo.org/wiki/Dwm#Starting
Do you have OpenRC or systemd ? If OpenRC do you have elogind in your boot runlevel ? (check with: "rc-update") |
|
| Back to top |
|
|
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
| Posted: Mon Oct 17, 2022 1:09 pm Post subject: |
|
|
| pietinger wrote: | | Do you have OpenRC or systemd ? If OpenRC do you have elogind in your boot runlevel ? (check with: "rc-update") |
I'm using OpenRC and elogind is in the boot runlevel. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4244
Location: Bavaria
|
|
| Back to top |
|
|
Leonardo.b
Apprentice
Joined: 10 Oct 2020
Posts: 298
|
| Posted: Mon Oct 17, 2022 1:15 pm Post subject: |
|
|
n2kia, try to run the windows manager in the foreground:
| Code: |
#exec dwm &
exec dwm
|
|
|
| Back to top |
|
|
n2kia
n00b
Joined: 17 Oct 2022
Posts: 6
|
| Posted: Mon Oct 17, 2022 2:05 pm Post subject: |
|
|
| Leonardo.b wrote: | n2kia, try to run the windows manager in the foreground:
| Code: |
#exec dwm &
exec dwm
|
|
Thanks, this worked. |
|
| Back to top |
|
|
Leonardo.b
Apprentice
Joined: 10 Oct 2020
Posts: 298
|
| Posted: Mon Oct 17, 2022 4:05 pm Post subject: |
|
|
When xinitrc returns, Xorg returns as well:
| Code: | | (II) Server terminated successfully (0). Closing log file. |
Note "exec" replace the current shell with the given command.
| Code: | exec dwm
# This will not run.
... |
If you want to run something after dwm, run "dwm", without "exec". |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
