| View previous topic :: View next topic |
| Author |
Message |
BlitDev
n00b
Joined: 24 Mar 2023
Posts: 4
|
 Posted: Tue Mar 28, 2023 5:59 am Post subject: Freezes for a couple of seconds or completely (AMDGPU) |
 |
|
My CPU: AMD Ryzen 5 5600G (APU with AMD Radeon RX Vega 7, Cezanne)
I use gentoo-sources (6.1.19), Sway.
Immediately after startup, everything usually works as it should, but with a small load, periodic freezes begin for 1-2 seconds. At medium-high load, the interface may completely freeze (fixed by rebooting). Freezes are not related to memory overflow (I tried with and without zram), also I have 16G Kingston DDR4.
I configured the kernel according to the handbook, tried to disable AMD Secure Memory Encryption. I tested working under load with Gentoo LiveGUI in KDE Plasma Wayland mode and with Sway. Nothing.
Most likely I configured the kernel incorrectly, or the guide is outdated. |
|
| Back to top |
|
 |
Goverp
Advocate
Joined: 07 Mar 2007
Posts: 2185
|
| Posted: Tue Mar 28, 2023 8:48 am Post subject: Re: Freezes for a couple of seconds or completely (AMDGPU) |
|
|
| BlitDev wrote: | My CPU: AMD Ryzen 5 5600G (APU with AMD Radeon RX Vega 7, Cezanne)
I use gentoo-sources (6.1.19), Sway.
Immediately after startup, everything usually works as it should, but with a small load, periodic freezes begin for 1-2 seconds. At medium-high load, the interface may completely freeze (fixed by rebooting). ... |
There are reported issues with "stuttering" in recent AMD chipsets fixed by either an updated BIOS or an updated kernel - see this Phoronix item. That said, I don't know if what you are seeing counts as "stuttering". However, the fix is supposed to be in 6.1.19. Are you sure that's the kernel you are running (rather than just installed - there are lots of forum items where the two are not the same!),
_________________
Greybeard |
|
| Back to top |
|
|
BlitDev
n00b
Joined: 24 Mar 2023
Posts: 4
|
| Posted: Tue Mar 28, 2023 3:07 pm Post subject: Re: Freezes for a couple of seconds or completely (AMDGPU) |
|
|
| Goverp wrote: | | BlitDev wrote: | My CPU: AMD Ryzen 5 5600G (APU with AMD Radeon RX Vega 7, Cezanne)
I use gentoo-sources (6.1.19), Sway.
Immediately after startup, everything usually works as it should, but with a small load, periodic freezes begin for 1-2 seconds. At medium-high load, the interface may completely freeze (fixed by rebooting). ... |
There are reported issues with "stuttering" in recent AMD chipsets fixed by either an updated BIOS or an updated kernel - see this Phoronix item. That said, I don't know if what you are seeing counts as "stuttering". However, the fix is supposed to be in 6.1.19. Are you sure that's the kernel you are running (rather than just installed - there are lots of forum items where the two are not the same!), |
I tried to update BIOS (which with AMD AGESA >1207, so it should be fixed) or disable fTPM, but nothing changed.
This problem not happen on LiveGUI, although it uses TPM.
P.S I checked neofetch, it's definitely 6.1.19, no other versions of kernel installed (eselect kernel list) |
|
| Back to top |
|
|
mike155
Advocate
Joined: 17 Sep 2010
Posts: 4438
Location: Frankfurt, Germany
|
| Posted: Tue Mar 28, 2023 6:20 pm Post subject: |
|
|
| Please post your kernel config and the output of dmesg. You may want to use wegtpaste. |
|
| Back to top |
|
|
CooSee
Veteran
Joined: 20 Nov 2004
Posts: 1477
Location: Earth
|
| Posted: Tue Mar 28, 2023 8:15 pm Post subject: |
|
|
also, start Sway in debug mode via sway -d >sway.log 2>&1 as logged in user from commandline (TTY) and wgetpaste sway.log from your users home folder.
maybe sway will tell what's wrong or missing.
using Sway/Waybar only system here, no Xorg and i love it 
_________________
" Die Realität ist eine Illusion, die durch Mangel an ehrlicher Kommunikation entsteht "
---
" Der Mensch ist von Natur aus neugierig, was am Ende übrig bleibt ist die Gier " |
|
| Back to top |
|
|
BlitDev
n00b
Joined: 24 Mar 2023
Posts: 4
|
|
| Back to top |
|
|
BlitDev
n00b
Joined: 24 Mar 2023
Posts: 4
|
| Posted: Wed Mar 29, 2023 6:33 am Post subject: |
|
|
| CooSee wrote: | also, start Sway in debug mode via sway -d >sway.log 2>&1 as logged in user from commandline (TTY) and wgetpaste sway.log from your users home folder.
maybe sway will tell what's wrong or missing.
using Sway/Waybar only system here, no Xorg and i love it
|
https://bin.disroot.org/?aa82e54c82a964f9#A9CEgbKfTmWARNX18vFVapkKBvCuFUDr4RcufQDLaLmU
Password: fi8shD2ojd4s
There are many error messages in the Sway logs. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
