| View previous topic :: View next topic |
| Author |
Message |
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
 Posted: Wed Aug 30, 2023 5:48 am Post subject: [SOLVED] Xorg (EE) no screens found(EE) |
 |
|
Hey,
I'm trying to startx on my Gentoo hardware but it gives me this error:
| Code: | # startx
xauth: (argv):1: bad display name "genbox:0" in "list" command
xauth: (stdin):1: bad display name "genbox:0" in "add" command
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux genbox 6.4.11-gentoo #6 PREEMPT_DYNAMIC Tue Aug 29 13:13:24 +01 2023 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.11-gentoo root=UUID=487a6fe3-e0f7-43b4-9bbb-b5dc47b981c0 ro nomodeset
Current version of pixman: 0.42.2
before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 29 22:21:26 2023
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "genbox:0" in "remove" command |
Xorg.0.log:
| Code: | [ 41.095]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 41.097] Current Operating System: Linux genbox 6.4.11-gentoo #6 SMP PREEMPT_DYNAMIC Tue Aug 29 13:13:24 +01 2023 x86_64
[ 41.097] Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.11-gentoo root=UUID=487a6fe3-e0f7-43b4-9bbb-b5dc47b981c0 ro nomodeset
[ 41.098]
[ 41.098] Current version of pixman: 0.42.2
[ 41.099] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41.099] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.101] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 30 06:35:31 2023
[ 41.103] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41.104] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 41.104] (==) No Layout section. Using the first Screen section.
[ 41.104] (==) No screen section available. Using defaults.
[ 41.104] (**) |-->Screen "Default Screen Section" (0)
[ 41.104] (**) | |-->Monitor "<default monitor>"
[ 41.105] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 41.105] (**) | |-->Device "Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev ca)"
[ 41.105] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41.105] (==) Automatically adding devices
[ 41.105] (==) Automatically enabling devices
[ 41.105] (==) Automatically adding GPU devices
[ 41.105] (==) Automatically binding GPU devices
[ 41.105] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 41.105] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 41.105] Entry deleted from font path.
[ 41.105] (==) FontPath set to:
[ 41.105] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 41.105] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.105] (II) Module ABI versions:
[ 41.105] X.Org ANSI C Emulation: 0.4
[ 41.105] X.Org Video Driver: 25.2
[ 41.105] X.Org XInput driver : 24.4
[ 41.105] X.Org Server Extension : 10.0
[ 41.106] (--) using VT number 7
[ 41.106] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 41.110] (--) PCI:*(0@0:1:0) 1002:9874:1043:1931 rev 202, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 41.110] (II) LoadModule: "glx"
[ 41.111] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 41.116] (II) Module glx: vendor="X.Org Foundation"
[ 41.116] compiled for 1.21.1.8, module version = 1.0.0
[ 41.116] ABI class: X.Org Server Extension, version 10.0
[ 41.116] (II) LoadModule: "amdgpu"
[ 41.117] (II) Loading /usr/lib64/xorg/modules/drivers/amdgpu_drv.so
[ 41.120] (II) Module amdgpu: vendor="X.Org Foundation"
[ 41.120] compiled for 1.21.1.8, module version = 23.0.0
[ 41.120] Module class: X.Org Video Driver
[ 41.120] ABI class: X.Org Video Driver, version 25.2
[ 41.120] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 41.121] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 41.121] (EE) AMDGPU(0): [drm] Failed to open DRM device for pci:0000:00:01.0: No such file or directory
[ 41.121] (EE) Screen 0 deleted because of no matching config section.
[ 41.121] (II) UnloadModule: "amdgpu"
[ 41.121] (EE) Device(s) detected, but none match those in the config file.
[ 41.121] (EE)
Fatal server error:
[ 41.121] (EE) no screens found(EE)
[ 41.122] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 41.122] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 41.122] (EE)
[ 41.124] (EE) Server terminated with error (1). Closing log file. |
I believe the main issue is this:
| Code: | | [ 41.121] (EE) AMDGPU(0): [drm] Failed to open DRM device for pci:0000:00:01.0: No such file or directory |
But I have no idea about it. I need some help. 
_________________
Illegitimi non carborundum.
Last edited by Torpus on Fri Sep 01, 2023 5:22 am; edited 1 time in total |
|
| Back to top |
|
 |
Ralphred
l33t
Joined: 31 Dec 2013
Posts: 711
|
| Posted: Wed Aug 30, 2023 11:08 am Post subject: |
|
|
| Try running Xorg -configure and see if it makes a useful output. |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 2004
|
| Posted: Wed Aug 30, 2023 12:30 pm Post subject: |
|
|
| Please ensure that CONFIG_DRM_AMDGPU=m in the kernel config and that the linux-firmware package is installed in order to have full graphics support. |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1886
Location: Germany
|
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 1:32 am Post subject: |
|
|
Thanks Banana, there were some little more stuff I had to update on my kernel, I recompiled it and updated linux-firmware.
I also found out that mouse support was off in the kernel, so I turned it on and recompiled the kernel once again with updating linux-firmware and getting GPM.
Xorg was able to detect my mouse (touchpad), but neither the mouse nor Xorg work.
Here's Xorg -configure:
| Code: | X.Org X Server 1.21.1.0
X Protocol Version 11, Revision 0
Current Operating System: Linux genbox 6.4.11-gentoo #8 SMP PREEMPT_DYNAMIC Thu Aug 31 00:02:26 +1 2023 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.11-gentoo root=UUID=487a6fe3-e0f7-43b4--9bbb--b5dc47b981c00000 ro nomodeset
Current version of pixman: 0.42.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 31 02:04:35 2023
List of video drivers:
amdgpu
ati
radeon
vboxvideo
modesetting
vesa
xf86EnableIO: failed to enable I/O ports 0000-03ff (Function not implemented)
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
(II) AMDGPU(1): [KMS] Kernel modesetting enabled.
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Xorg has configured a multihead system, please check your config.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
(EE) Server terminated with error (2). Closing log file. |
xorg.conf.new:
| Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ZaphodHeads" # <str>
#Option "AccelMethod" # <str>
#Option "DRI3" # [<bool>]
#Option "DRI" # <i>
#Option "ShadowPrimary" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "DeleteUnusedDP12Displays" # [<bool>]
#Option "VariableRefresh" # [<bool>]
#Option "AsyncFlipSecondaries" # [<bool>]
Identifier "Card0"
Driver "amdgpu"
BusID "PCI:0:1:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ZaphodHeads" # <str>
#Option "AccelMethod" # <str>
#Option "DRI3" # [<bool>]
#Option "DRI" # <i>
#Option "ShadowPrimary" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "DeleteUnusedDP12Displays" # [<bool>]
#Option "VariableRefresh" # [<bool>]
#Option "AsyncFlipSecondaries" # [<bool>]
Identifier "Card1"
Driver "amdgpu"
BusID "PCI:0:1:1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection |
When I startx now I get the same error as in the beginning, except this time for some reason all of (EE) messages are condensed in one line where I can't see some of it but obviously they seem like giving the same errors.
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 1:35 am Post subject: |
|
|
I forgot the Xorg log:
| Code: | [ 269.468]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 269.468] Current Operating System: Linux genbox 6.4.11-gentoo #8 SMP PREEMPT_DYNAMIC Thu Aug 31 00:02:26 +01 2023 x86_64
[ 269.468] Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.11-gentoo root=UUID=487a6fe3-e0f7-43b4-9bbb-b5dc47b981c0 ro nomodeset
[ 269.468]
[ 269.468] Current version of pixman: 0.42.2
[ 269.468] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 269.468] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 269.468] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 31 02:04:35 2023
[ 269.468] (II) Module ABI versions:
[ 269.468] X.Org ANSI C Emulation: 0.4
[ 269.468] X.Org Video Driver: 25.2
[ 269.468] X.Org XInput driver : 24.4
[ 269.468] X.Org Server Extension : 10.0
[ 269.468] (--) using VT number 7
[ 269.468] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 269.472] (--) PCI:*(0@0:1:0) 1002:9874:1043:1931 rev 202, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 269.472] List of video drivers:
[ 269.472] amdgpu
[ 269.472] ati
[ 269.472] radeon
[ 269.472] vboxvideo
[ 269.472] modesetting
[ 269.472] vesa
[ 269.472] (II) LoadModule: "amdgpu"
[ 269.472] (II) Loading /usr/lib64/xorg/modules/drivers/amdgpu_drv.so
[ 269.473] (II) Module amdgpu: vendor="X.Org Foundation"
[ 269.473] compiled for 1.21.1.8, module version = 23.0.0
[ 269.473] Module class: X.Org Video Driver
[ 269.473] ABI class: X.Org Video Driver, version 25.2
[ 269.473] (II) LoadModule: "ati"
[ 269.473] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 269.473] (II) Module ati: vendor="X.Org Foundation"
[ 269.473] compiled for 1.21.1.8, module version = 22.0.0
[ 269.473] Module class: X.Org Video Driver
[ 269.473] ABI class: X.Org Video Driver, version 25.2
[ 269.473] (II) LoadModule: "radeon"
[ 269.473] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 269.474] (II) Module radeon: vendor="X.Org Foundation"
[ 269.474] compiled for 1.21.1.8, module version = 22.0.0
[ 269.474] Module class: X.Org Video Driver
[ 269.474] ABI class: X.Org Video Driver, version 25.2
[ 269.474] (II) LoadModule: "vboxvideo"
[ 269.474] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 269.474] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 269.474] compiled for 1.21.1.8, module version = 1.0.1
[ 269.474] Module class: X.Org Video Driver
[ 269.474] ABI class: X.Org Video Driver, version 25.2
[ 269.474] (**) Load address of symbol "VBOXVIDEO" is 0x7f7753084320
[ 269.474] (II) LoadModule: "modesetting"
[ 269.474] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 269.474] (II) Module modesetting: vendor="X.Org Foundation"
[ 269.474] compiled for 1.21.1.8, module version = 1.21.1
[ 269.474] Module class: X.Org Video Driver
[ 269.474] ABI class: X.Org Video Driver, version 25.2
[ 269.474] (II) LoadModule: "vesa"
[ 269.474] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 269.474] (II) Module vesa: vendor="X.Org Foundation"
[ 269.474] compiled for 1.21.1.8, module version = 2.6.0
[ 269.474] Module class: X.Org Video Driver
[ 269.474] ABI class: X.Org Video Driver, version 25.2
[ 269.474] xf86EnableIO: failed to enable I/O ports 0000-03ff (Function not implemented)
[ 269.474] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 269.474] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 269.475] (II) VESA: driver for VESA chipsets: vesa
[ 269.487] (++) Using config file: "/root/xorg.conf.new"
[ 269.487] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 269.487] (==) ServerLayout "X.org Configured"
[ 269.487] (**) |-->Screen "Screen0" (0)
[ 269.487] (**) | |-->Monitor "Monitor0"
[ 269.487] (**) | |-->Device "Card0"
[ 269.487] (**) |-->Screen "Screen1" (1)
[ 269.487] (**) | |-->Monitor "Monitor1"
[ 269.487] (**) | |-->Device "Card1"
[ 269.487] (**) |-->Input Device "Mouse0"
[ 269.487] (**) |-->Input Device "Keyboard0"
[ 269.487] (==) Automatically adding devices
[ 269.487] (==) Automatically enabling devices
[ 269.487] (==) Automatically adding GPU devices
[ 269.487] (==) Automatically binding GPU devices
[ 269.487] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 269.487] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 269.487] Entry deleted from font path.
[ 269.487] (**) FontPath set to:
[ 269.487] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 269.487] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 269.487] (WW) Disabling Mouse0
[ 269.487] (WW) Disabling Keyboard0
[ 269.487] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 269.487] (EE) AMDGPU(0): [drm] Failed to open DRM device for pci:0000:00:01.0: No such file or directory
[ 269.487] (II) AMDGPU(1): [KMS] Kernel modesetting enabled.
[ 269.487] (EE) AMDGPU(1): [drm] Failed to open DRM device for pci:0000:00:01.1: No such file or directory
[ 269.487]
[ 269.487]
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
[ 269.488]
Xorg has configured a multihead system, please check your config.
[ 269.488]
Your xorg.conf file is /root/xorg.conf.new
[ 269.488] To test the server, run 'X -config /root/xorg.conf.new'
[ 269.488] (EE) Server terminated with error (2). Closing log file. |
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54821
Location: 56N 3W
|
| Posted: Thu Aug 31, 2023 7:45 am Post subject: |
|
|
Torpus,
You have exactly one AMDGPU card its detected here.
| Code: | | [ 269.472] (--) PCI:*(0@0:1:0) 1002:9874 |
So your has to be incorrect.
Most of your xorg.conf is redundant. As a test, rename it to xorg.conf_broken, so that its not found.
If all is well, running Xorg now will get you the default single screen, right handed user USA keymap view.
If that works, two displays is a configuration issue.
The idea is to split the problem into pieces then fix each piece, rather than have one big problem.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
irets
Apprentice
Joined: 17 Dec 2019
Posts: 229
|
| Posted: Thu Aug 31, 2023 8:27 am Post subject: |
|
|
| Could you also post the contents of your .xinitrc? |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 11:50 am Post subject: |
|
|
I don't have .xinitrc in /root or /home/user
I tried renaming my xorg.conf to xorg.conf_broken, when I Xorg -configure again a new identical xorg.conf.new gets automatically created after while Xorg gives the same error.
Also if I just typed
I'll have pretty much the same no screens found error alongside with vesa refusing to run:
| Code: | X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux genbox 6.4.11-gentoo #6 PREEMPT_DYNAMIC Thu Aug 31 00:02:26 +01 2023 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-6.4.11-gentoo root=UUID=487a6fe3-e0f7-43b4-9bbb-b5dc47b981c0 ro nomodeset
Current version of pixman: 0.42.2
before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 31 12:00:51 2023
(==) Using config directory: "/etc/X11/xorg.conf.d"
xf86EnableIO: failed to enable I/O ports 0000-03ff (Function not implemented)
vesa: Refusing to run, Framebuffer or dri device present
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file. |
I have also to note an important thing that is my touchpad doesn't work here even when I checked my kernel config (and recompiled it) and the GPM daemon starts, which is pretty weird. I believe that the mouse must work in order for X11 to start, but even in the terminal interface I can't see any small white block (or whatever it's called) that I can hover with my touchpad 
Here's my /etc/init.d/gpm
Maybe the main issue can be from there.
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54821
Location: 56N 3W
|
| Posted: Thu Aug 31, 2023 12:27 pm Post subject: |
|
|
Torpus,
Xorg -configure has been broken longer than I can remember but the automatics do a good job.
It really is OK to not have an xorg.conf as a get you going measure.
With no .xinitrc, startx will try to start three xterms and an xclock all wrapped up in twm.
That's all well and good but they are not installed unless you did that.
xorg needs some root help to set up before it drops to user privs.
If you don't use a display manager, you need to provide the root help.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1886
Location: Germany
|
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 2:32 pm Post subject: |
|
|
I'm not trying to run a DE but a window manager instead which is dwm, it's already installed and set.
xterms, xclock and twm were all not installed, so I emerged them.
I forgot to tell also that right now I'm doing EVERYTHING as root.
Now when I startx, it gave me the same error as the one in the beginning, except that
xinit: unable to connect to X server: Connection refused
Here's my lspci:
| Code: | 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev ca)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio Dummy Host Bridge
00:09.2 Computer telephony device: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5
01:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN500 / PC SN520 NVMe SSD (rev 01)
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78) |
emerge --info gives me INPUT_DEVICES="libinput" and VIDEO_CARDS="amdgpu radeonsi"
The new Xorg.0.log
Please help me finish this as I'm struggling with it for almost a week... :'(
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54821
Location: 56N 3W
|
| Posted: Thu Aug 31, 2023 3:16 pm Post subject: |
|
|
Torpus,
How do you expect to start your window manager?
If you have an xorg.config, get rid of it.
To start dwm by running startx follow https://wiki.gentoo.org/wiki/Dwm#Configuration
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 5:30 pm Post subject: |
|
|
startx shows the same permission denied error again 
I expected that dwm would start after doing the startx command, but even after installing the packages and following the guide it just doesn't work.
I'd pastebin my log and dmesg again in just a sec
edit: here they are: dmesg.txt Xorg.0.log
The weirdest thing in it is that startx says permission denied while Xorg -configure says a completely different thing which is no screens found (in this time)
Sorry if I sounded to dumb btw, everyone went through this..
A guy who used Mint and Manjaro for 6 months can't be stuck in bloatware and learn nothing 1337.
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 2004
|
| Posted: Thu Aug 31, 2023 6:05 pm Post subject: |
|
|
The xorg.log shows xf86-video-ati installed when it won't help and it also shows that xf86-video-amdgpu is not installed.
Your GPU is controlled by CONFIG_DRM_AMDGPU on the kernel side and xf86-video-amdgpu on the Xorg side.
What does modprobe --first-time amdgpu report? If successful, it won't output anything.
What does emerge -pvO xf86-video-amdgpu report? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54821
Location: 56N 3W
|
| Posted: Thu Aug 31, 2023 6:07 pm Post subject: |
|
|
Torpus,
Ignore Xorg -configure. Its not useful.
Here is the automatics sorting out Video drivers. Its picked ati as the best.
| Code: | [ 38.611] (==) Matched ati as autoconfigured driver 0
[ 38.611] (==) Matched modesetting as autoconfigured driver 1
[ 38.611] (==) Matched fbdev as autoconfigured driver 2
[ 38.611] (==) Matched vesa as autoconfigured driver 3
[ 38.611] (==) Assigned the driver to the xf86ConfigLayout |
| Code: | | [ 38.622] (EE) open /dev/dri/card0: No such file or directory |
Your kernel is missing DRM support.
That will be Radeon in the kernel.
But ... | Code: | | [ 38.605] (--) PCI:*(0@0:1:0) 1002:9874: |
is a PCI\VEN_1002&DEV_9874 - Wani [Radeon R5/R6/R7 Graphics]
In turn, that's a Carrizo family GPU which comes under Volcanic Islands
Either Radeon or AMDGPU can be used but you may not use half of one and half of the other.
The Radeon Xorg driver loaded, found that's its DRM support was maissing and gave up.
Modesetting will work on top of any DRM support but until your kernel provides /dev/dri/card0 nothing else matters.
Pastebin your kernel .config file please.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 2004
|
| Posted: Thu Aug 31, 2023 6:20 pm Post subject: |
|
|
| NeddySeagoon wrote: | But ... | Code: | | [ 38.605] (--) PCI:*(0@0:1:0) 1002:9874: |
is a PCI\VEN_1002&DEV_9874 - Wani [Radeon R5/R6/R7 Graphics]
In turn, that's a Carrizo family GPU which comes under Volcanic Islands
Either Radeon or AMDGPU can be used but you may not use half of one and half of the other. |
Volcanic Islands is only AMDGPU not Radeon. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54821
Location: 56N 3W
|
| Posted: Thu Aug 31, 2023 6:26 pm Post subject: |
|
|
grknight,
Odd. Xorg does not usually pick the wrong driver ...
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Thu Aug 31, 2023 7:47 pm Post subject: |
|
|
Here's my .config 
I get this when I run:
| Code: | ~ # modprobe --first-time amdgpu
modprobe: ERROR: could not insert 'amdgpu': Invalid argument
~ # emerge -pvO xf86-video-amdgpu
These are the packages that would be merged, in order:
[ebuild R ] x11-drivers/xf86-video-amdgpu-23.0.0::gentoo USE="-udev" 0 KiB
Total: 1 package (1 reinstall), Size of downloads: 0 KiB
* IMPORTANT: 17 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items. |
Thanks in advance!
Also how come I'm having Volcanic Islands but I need Radeon graphic support??
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 2004
|
| Posted: Thu Aug 31, 2023 7:56 pm Post subject: |
|
|
| Torpus wrote: | | Code: | ~ # modprobe --first-time amdgpu
modprobe: ERROR: could not insert 'amdgpu': Invalid argument |
|
There is a kernel problem with loading support for amdgpu. When you ran this command, some new logging should have appeared in dmesg.
If not, then reinstalling kernel modules may solve it as well. Make sure there is nothing strange in /etc/modprobe.d referring to amdgpu as well. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5372
Location: Bavaria
|
| Posted: Thu Aug 31, 2023 8:51 pm Post subject: |
|
|
First of all: Do you know what kernel command line parameter "nomodeset" does ? Why you have enabled it ? Please delete it.
(In the mean time I will look to your kernel .config) |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5372
Location: Bavaria
|
| Posted: Thu Aug 31, 2023 9:09 pm Post subject: |
|
|
I did only a short overview ... maybe you want read:
https://wiki.gentoo.org/wiki/User:Pietinger/Tutorials/Manual_Configuring_Kernel_Version_6.1
| Code: | 1)
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
2)
CONFIG_CFG80211=y
CONFIG_MAC80211=y
3)
# CONFIG_PINCTRL_AMD is not set
4)
# CONFIG_SND_HDA_CODEC_REALTEK is not set
5)
# CONFIG_USB_UAS is not set
6)
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
7)
CONFIG_INTEL_IOMMU=y
8)
# CONFIG_FUSE_FS is not set
9)
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_LANDLOCK is not set
10a)
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
10b)
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
11)
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set |
1) You really should configure this (see also warning in your dmesg)
2) As already mentionend in your other thread
3) It is an AMD machine. Enable it.
4) I think you will need it.
5) Better performance (if you have an USB device which supports it)
6) I dont know if you need also V2 ... just enable it. If it is not supported it does not hurt.
7) You really dont need it.
8 ) Some applications want this ...
9) It is highly recommended to enable both
10) If you need both (a) THEN check with "lscpu" if you have "avx" or "sha_ni". If yes enable all (b) also static (performance!)
11) This is needed by every block device. If "lscpu" shows "pclmulqdq" or "sse4_2" then enable both static (performance)
BTW: Your configuration for your AMD GPU is okay ... You have just forbid it with your wrong kernel parameter |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Fri Sep 01, 2023 5:21 am Post subject: |
|
|
IT WORKED!!!! 
I FINALLY CAN ENTER DWM JUST FROM TYPING STARTX!!
THANK YOU GUYS YOU'RE THE BEST
And thanks pietinger for helping me optimizing me messy kernel as well 
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5372
Location: Bavaria
|
| Posted: Fri Sep 01, 2023 8:56 am Post subject: |
|
|
| Torpus wrote: | | IT WORKED!!!! |
I am happy to hear this !
You are very welcome !
Have fun with Gentoo ! 
(I am sure your problem with wifi will be solved soon too. But WHY you have enabled "nomodeset" ?? I dont understand) |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 5372
Location: Bavaria
|
| Posted: Fri Sep 01, 2023 9:25 am Post subject: |
|
|
P.S.:
Torpus,
after reviewing my threads I have seen that there is a third thread from you (GRUB stuck at Loading initial ramdisk after first boot) ... already solved. Let me say that I like it very much if people make their own kernel. You learn the most about Linux and your own system. In a german article I said: "Dont try to make a perfect kernel configuration in the first run ... because it is impossible ... it takes time and experience to get an optimal kernel". So let me please point you also to a (great) wiki article about an AMD notebook (ROG Zephyrus G14):
https://wiki.gentoo.org/wiki/ROG_Zephyrus_G14_(2022)_GA402#Kernel
Maybe you will find some hints here - especially for AMD P-State:
https://wiki.gentoo.org/wiki/ROG_Zephyrus_G14_(2022)_GA402#AMD_P-State |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
