| View previous topic :: View next topic |
| Author |
Message |
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
 Posted: Sat Sep 23, 2023 6:53 am Post subject: Microphone not working |
 |
|
Hey Gentooers 
I just configured my ALSA and sound seems to be working pretty well on Gentoo, but there's something weird in my microphone which is that after recording something and playing the sample audio, what I actually hear from it isn't my sound or anything, EDIT: Well, actually the recording is completely silent, the speaker DOES play other audios downloaded online etc...
Anyway, this is what I've been doing:
| Code: | localhost ~ # arecord --list-devices
**** List of CAPTURE Hardware Devices ****
card 1: Generic [HD-Audio Generic], device 0: Generic Analog [Generic Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
localhost ~ # arecord /tmp/text.wav
Warning: Some sources (like microphones) may produce inaudible results
with 8-bit sampling. Use '-f' to increase resolution
e.g. '-f S16_LE'
Recording WAVE '/tmp/text.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
^CAborted by signal Interrupt...
arecord: pcm_read:2240: read error: Interrupted system call
localhost ~ # mpv /tmp/text.wav
[ffmpeg/demuxer] wav: Estimating duration from bitrate, this may be inaccurate
(+) Audio --aid=1 (pcm_u8 1ch 8000Hz)
AO: [alsa] 96000Hz mono 1ch u8
A: 00:00:16 / 00:00:17 (90%)
[ffmpeg/demuxer] wav: Packet corrupt (stream = 0, dts = NOPTS).
A: 00:00:17 / 00:00:17 (98%)
Exiting... (End of file)
localhost ~ # |
See, recording is only 8000Hz, which I guess is pretty low 
asound.state:
| Code: | state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.Generic {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Capture Volume'
value.0 80
value.1 80
comment {
access 'read write'
type INTEGER
count 2
range '0 - 80'
dbmin -7400
dbmax 600
dbvalue.0 600
dbvalue.1 600
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.10 {
iface MIXER
name 'Master Playback Volume'
value 54
comment {
access 'read write'
type INTEGER
count 1
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 -2000
}
}
control.11 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.16 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.17 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.18 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.19 {
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
} |
I don't have pulseaudio or anything yet (though I'm planning to use PipeWire)
Thanks in advace
_________________
Illegitimi non carborundum.
Last edited by Torpus on Sat Sep 23, 2023 8:44 pm; edited 1 time in total |
|
| Back to top |
|
 |
stefan11111
l33t
Joined: 29 Jan 2023
Posts: 934
Location: Romania
|
| Posted: Sat Sep 23, 2023 11:02 am Post subject: Re: Microphone not working |
|
|
| Torpus wrote: | (though I'm planning to use PipeWire)
|
Why?
_________________
My overlay: https://github.com/stefan11111/stefan_overlay
INSTALL_MASK="/etc/systemd /lib/systemd /usr/lib/systemd /usr/lib/modules-load.d *udev* /usr/lib/tmpfiles.d *tmpfiles* /var/lib/dbus /usr/bin/gdbus /lib/udev" |
|
| Back to top |
|
|
Torpus
Apprentice
Joined: 20 Aug 2023
Posts: 184
|
| Posted: Sat Sep 23, 2023 4:10 pm Post subject: |
|
|
stefan11111,
It's better and less bloated than PulseAudio
I forgot to set the dbus daemon, just turned it on again.
As you can see I already have
| Code: | CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_MIDI_V2=y |
set
_________________
Illegitimi non carborundum. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54587
Location: 56N 3W
|
| Posted: Sun Sep 24, 2023 4:58 pm Post subject: |
|
|
Locked in favour of Microphone not working
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54587
Location: 56N 3W
|
| Posted: Sun Sep 24, 2023 4:58 pm Post subject: |
|
|
Moved from Multimedia to Duplicate Threads.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
Duplicate Threads
