View previous topic :: View next topic |
Author |
Message |
zppln n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 08 Oct 2023 Posts: 3
|
Posted: Mon Nov 06, 2023 6:39 pm Post subject: USB trouble: unable to enumerate USB device (error -32) |
|
|
Good evening,
I'm having some trouble with my scanner. I've previously gotten it to work, but now when I try to plug it in it indicates error and dmesg prints the following:
Code: | usb 1-8: new high-speed USB device number 13 using xhci_hcd
usb 1-8: device descriptor read/64, error -32
usb 1-8: device descriptor read/64, error -32
usb 1-8: new high-speed USB device number 14 using xhci_hcd
usb 1-8: device descriptor read/64, error -32
usb 1-8: device descriptor read/64, error -32
usb usb1-port8: attempt power cycle
usb 1-8: new high-speed USB device number 15 using xhci_hcd
usb 1-8: device descriptor read/8, error -32
usb 1-8: device descriptor read/8, error -32
usb 1-8: new high-speed USB device number 16 using xhci_hcd
usb 1-8: device descriptor read/8, error -32
usb 1-8: device descriptor read/8, error -32
usb usb1-port8: unable to enumerate USB device |
I can't recall having dabbled with anything that should have affected this since it worked last time. I've probably upgraded kernel a few times since, but I'm on gentoo-kernel-bin (6.1.57) so I don't think that should affect things.
Any ideas? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
rogge Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
Joined: 13 Oct 2006 Posts: 132 Location: Erfurt
|
Posted: Thu Nov 23, 2023 12:02 pm Post subject: |
|
|
Same here. Thanks to your post https://forums.gentoo.org/viewtopic-t-1165416.html my scanner was finally working, but then fully bricked.
I didn't changed the Kernel in the meantime and sys-apps/usbutils was updated in May 2023 last time.
I made a fresh install on my laptop where this scanner never was connect to. But the very same problem appeared.
Every else USB devices (like mouse, keyboard, stick) working fine on the same ports.
I also changed the USB cable but without effect.
Lastly I connect the scanner to a Windows only laptop and this says 'something went wrong', too. So, unfortunately,
it really looks like my scanner bricked, but I dunno why. I consider it's because of the driver. The correct firmware for
Epson Perfection V370 is actually esfwdd.bin, but this wasn't working here. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
zppln n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 08 Oct 2023 Posts: 3
|
Posted: Thu Aug 22, 2024 8:11 pm Post subject: |
|
|
rogge wrote: | Same here. Thanks to your post https://forums.gentoo.org/viewtopic-t-1165416.html my scanner was finally working, but then fully bricked.
I didn't changed the Kernel in the meantime and sys-apps/usbutils was updated in May 2023 last time.
I made a fresh install on my laptop where this scanner never was connect to. But the very same problem appeared.
Every else USB devices (like mouse, keyboard, stick) working fine on the same ports.
I also changed the USB cable but without effect.
Lastly I connect the scanner to a Windows only laptop and this says 'something went wrong', too. So, unfortunately,
it really looks like my scanner bricked, but I dunno why. I consider it's because of the driver. The correct firmware for
Epson Perfection V370 is actually esfwdd.bin, but this wasn't working here. |
Wow dude, I'm so sorry. I had no idea. I haven't gotten around to looking into this since my original post until today. I guess mine is bricked as well then... Did you manage to unbrick yours? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|