View previous topic :: View next topic |
Author |
Message |
kgdrenefort Guru
Joined: 19 Sep 2023 Posts: 312 Location: Somewhere in the 77
|
Posted: Wed Apr 24, 2024 3:19 pm Post subject: Your worst mistake so far with Gentoo, or Jaguar |
|
|
Hello,
Today I made the worst mistake one can make while trying to fix his own poop.
Will not get into details, but I had to remove the content of my root partition and apply a xfsdump backup with xfsrestore.
I mount on my old Debian the root of my actual OS, Gentoo.
Then, I type, while in the /mnt/gentoo directory:
Five seconds later…
OH NO PLEASE NO GOD WHAT DID I JUST DONE ?!
Reflex is Ctrl^C, which is purely useless by the way, that moment of panick turned my brain off for a second.
Then, I realize the damage: Destroyed the root of Gentoo, which was the goal, then my old Debian.
In the process, lucky me my home wasn't mounted, as my external backup drive. The datas are safe.
This was so much a newbie move, honnestly.
I wanted to type:
While in that directory, usually I also type destination, then options, THEN rm. Not today. Nope.
What's yours ?
Regards,
GASPARD DE RENEFORT Kévin _________________ Traduction wiki, pour praticiper.
Custom logos/biz card/website.
Last edited by kgdrenefort on Wed Apr 24, 2024 7:33 pm; edited 2 times in total |
|
Back to top |
|
|
eeckwrk99 Apprentice
Joined: 14 Mar 2021 Posts: 231 Location: Gentoo forums
|
Posted: Wed Apr 24, 2024 3:42 pm Post subject: |
|
|
Quote: | While in that directory, usually I also type destination, then options, THEN rm. Not today. Nope. |
This is definitely good practice to do so.
Starting the command with "#" so that if pressing Enter by accident, the command isn't run and is interpreted as an interactive comment instead is also good idea. I'm using setopt INTERACTIVE_COMMENTS in my Zsh config but even without it it seems that it only returns
Code: | zsh: command not found: # |
I've just tried with Bash without any special config and it seems that the command isn't interpreted either when adding a leading #, at least on my current Gentoo install. |
|
Back to top |
|
|
Hu Administrator
Joined: 06 Mar 2007 Posts: 22657
|
Posted: Wed Apr 24, 2024 3:43 pm Post subject: |
|
|
While on a system with a glibc older than the latest stable of the day, I ran emerge --usepkgonly important-package (maybe sys-apps/coreutils? I don't remember exactly). Portage dutifully installed the requested update from my binhost, which had a newer glibc and had built coreutils with that newer glibc. The package's RDEPEND data does not instruct Portage to ensure that the target's glibc is not older than the build glibc. That left me with a coreutils that failed to start due to it needing the newer glibc's symbols. I remember being very pleased with myself that in less than an hour of work, and with no reboots, I got everything fixed. Statically linked busybox was key to recovering that system. |
|
Back to top |
|
|
kgdrenefort Guru
Joined: 19 Sep 2023 Posts: 312 Location: Somewhere in the 77
|
Posted: Wed Apr 24, 2024 4:08 pm Post subject: |
|
|
eeckwrk99 wrote: | Quote: | While in that directory, usually I also type destination, then options, THEN rm. Not today. Nope. |
This is definitely good practice to do so.
Starting the command with "#" so that if pressing Enter by accident, the command isn't run and is interpreted as an interactive comment instead is also good idea. I'm using setopt INTERACTIVE_COMMENTS in my Zsh config but even without it it seems that it only returns
Code: | zsh: command not found: # |
I've just tried with Bash without any special config and it seems that the command isn't interpreted either when adding a leading #, at least on my current Gentoo install. |
Well, actually the '#' was added for the purpose of this topic, showing that was in root. But you know what ? Damn good point you raised, if I have to rerun a rm, will definitly add this to the manual process, that would have MAYBE saved my things sit on my chair, since I would probably hit enter as fast but, it would be a comment, would have forced me to extra-check in case… Er.
That is also something I'll add to my wishlist to-do-myself: Adding an alias running a script for rm, merely asking you to be SURE you are aware of what you are doing, and maybe ask you to type: "Yes, I'm sure, remember that 24th April 2024 in the morning when you lost a whole day because you are AN IDIOT !". Can't be more sure than this, right ?
Hu wrote: | While on a system with a glibc older than the latest stable of the day, I ran emerge --usepkgonly important-package (maybe sys-apps/coreutils? I don't remember exactly). Portage dutifully installed the requested update from my binhost, which had a newer glibc and had built coreutils with that newer glibc. The package's RDEPEND data does not instruct Portage to ensure that the target's glibc is not older than the build glibc. That left me with a coreutils that failed to start due to it needing the newer glibc's symbols. I remember being very pleased with myself that in less than an hour of work, and with no reboots, I got everything fixed. Statically linked busybox was key to recovering that system. |
That is an nice fix, the reboot would have been fatal I imagine, or at least you'll be hitting a non-booting system until chrooting to repair it.
Back a few years ago, Debian wasn't compatible with Discord, because glibc version was, in my memory, not the same. Or maybe that was another kind of package as glibc where the release is really important, had checked that at this time and the horrible fix I found was using the Ubuntu's version… On Debian. Which is possible, but is against Genevia Convention !
It worked, Debian was still able to run, but every update become me sweating hard in front of apt-get, hoping nothing will break. _________________ Traduction wiki, pour praticiper.
Custom logos/biz card/website. |
|
Back to top |
|
|
Ralphred l33t
Joined: 31 Dec 2013 Posts: 653
|
Posted: Wed Apr 24, 2024 5:15 pm Post subject: |
|
|
I've had an errant rm -rf * command, but we all know how that goes.
The real mistake was when using testdisk to recover the files, I accidentally dropped the recovery image on the same disk meaning all the files after the like the first 5 were of "zero bytes". Had to restore from backup in the end, no real losses, just embarrassed annoyance, well and a new appreciation of physically writing down dev names against "normal" mount points when booting from "foreign" media. |
|
Back to top |
|
|
Goverp Advocate
Joined: 07 Mar 2007 Posts: 2179
|
Posted: Wed Apr 24, 2024 5:42 pm Post subject: |
|
|
I did an oil change but forgot to put the drain plug back before I refilled.
Oh, sorry, that was a Jaguar, not Linux. Still messy. _________________ Greybeard |
|
Back to top |
|
|
rab0171610 Guru
Joined: 24 Dec 2022 Posts: 423
|
Posted: Wed Apr 24, 2024 5:59 pm Post subject: |
|
|
I keep daily backups with Timeshift. If anything goes wonky, I just roll back to midnight last. Thanks to that, I haven't had these types of problems in years. I have actually installed a different OS over my partitions to see how it would work on bare metal, and within just a few minutes had my system restored back with Timeshift as if it never happened. If I delete or overwrite something by accident, I have daily backups on a separate drive I can just browse through and restore the files individually if needed.
Anyway, I think the biggest mistake anyone could ever make in Linux is not keeping good, reliable and easily accessible backups. That would seem to prevent a lot of problems that I see users, both inexperienced and advanced, experiencing on Linux OS forums. |
|
Back to top |
|
|
Spanik Veteran
Joined: 12 Dec 2003 Posts: 1003 Location: Belgium
|
Posted: Wed Apr 24, 2024 7:20 pm Post subject: |
|
|
Not yet with linux. But I had a moment with W2K when with some friends we were recording a demo for their band and I added an extra disk to the pc (just to be sure you know). Windows changed the drive letters and I formatted the drive with all the recordings on instead of the new one. We had some backups but not everything.
This was one of the reasons I went to linux, to get rid of those idiotic drive letters. But that took some years to really switch. _________________ Expert in non-working solutions |
|
Back to top |
|
|
kgdrenefort Guru
Joined: 19 Sep 2023 Posts: 312 Location: Somewhere in the 77
|
Posted: Wed Apr 24, 2024 7:32 pm Post subject: |
|
|
Goverp wrote: | I did an oil change but forgot to put the drain plug back before I refilled.
Oh, sorry, that was a Jaguar, not Linux. Still messy. ;-) |
Once I cleaned the filter of my washing machine… forgot the joint, put the filter back and started a cycle.
There is a lot of water in a washing machine, did you know that ?! _________________ Traduction wiki, pour praticiper.
Custom logos/biz card/website. |
|
Back to top |
|
|
Leonardo.b Guru
Joined: 10 Oct 2020 Posts: 308
|
Posted: Wed Apr 24, 2024 7:51 pm Post subject: |
|
|
Easter holydays. Bank account password change.
I create a new random password, and store it in a safe place on disk.
Soon I want to manually backup it, but I type cp command in the reverse order and I override the new password.
Got locked out for almost a week.
I call it a mistake but Freud may agrue...
https://en.m.wikipedia.org/wiki/The_Psychopathology_of_Everyday_Life |
|
Back to top |
|
|
wuzzerd Guru
Joined: 05 Jan 2005 Posts: 467 Location: New Mexico
|
Posted: Wed Apr 24, 2024 9:02 pm Post subject: |
|
|
Trying systemd. |
|
Back to top |
|
|
Taigo Tux's lil' helper
Joined: 09 Nov 2022 Posts: 105 Location: the Netherlands
|
Posted: Thu Apr 25, 2024 7:17 am Post subject: Re: Your worst mistake so far with Gentoo, or Jaguar |
|
|
I tried installing LFS for the funs one day. And i still have no clue how it happened but i messed up my root file permissions.
I could not fix it i had to reinstall my system but at least i learned from this.
It's either:
- Do not install LFS on your main host system ( use a VM )
- Watch out with changing permissions
I think this could be similar to OP's issue where instead of changing recursively from ./* i did /* |
|
Back to top |
|
|
Genone Retired Dev
Joined: 14 Mar 2003 Posts: 9611 Location: beyond the rim
|
Posted: Thu Apr 25, 2024 3:02 pm Post subject: |
|
|
To add some non-FS related content: Accidentally put a "DROP ALL" rule at the top (instead of bottom) of the iptables rules on my headless server and wondered why my SSH session froze instantly. |
|
Back to top |
|
|
dartleader Tux's lil' helper
Joined: 21 Apr 2019 Posts: 126
|
Posted: Fri Apr 26, 2024 10:41 pm Post subject: |
|
|
Genone wrote: | To add some non-FS related content: Accidentally put a "DROP ALL" rule at the top (instead of bottom) of the iptables rules on my headless server and wondered why my SSH session froze instantly. | Are you me? See also: being in a really complicated, confusing ssh session and editing config files on the wrong computer. |
|
Back to top |
|
|
lekto Apprentice
Joined: 20 Sep 2014 Posts: 207 Location: Ancient Rome
|
Posted: Sat Apr 27, 2024 5:02 pm Post subject: |
|
|
For some reason, I have decided to switch from AMD64 to ~AMD64. About halfway through rebuilding, I changed my mind and stopped it. But instead of rebuilding stuff back, I decided to restore it from my rsnapshot backup. After I restored it, I ran emerge to check if everything was up to date, and emerge wanted to rebuild packages back, like I didn't restore them at all. So, I restored them again, and emerge still wanted to rebuild them, so I started investigating. I compared a few files that belong to packages that I was 100% sure were rebuilt, and they matched files in backup, so I did restore them. It took me a while, but I found that I didn't have /var/db/pkg in my backup, so I had a system with files in the right versions, but portage was thinking they were in the wrong versions, and it wanted to downgrade them, but it couldn't because dependencies were in the wrong versions. I couldn't use genlop to check what exactly I rebuilt because I restored emerge.log. I had to manually run qcheck to find what was wrong and then ebuild merge to rebuild it, but I had to do it in the right order, and then I ran emerge -e @world. In the end, instead of waiting a few hours for downgrading, I wasted many times more trying to fixing that mess manually.
To this day, this machine is working, and according to find: 35528/736397 (~4.82%) files in /usr/ are older than the 2020 year and are probably leftovers from that mess.
P.S. By restoring from backup, I mean I copied files from backup, but didn't deleted files that weren't in backup. |
|
Back to top |
|
|
mrbassie l33t
Joined: 31 May 2013 Posts: 821 Location: Go past the sign for cope, right at the sign for seethe. If you see the target you've missed it.
|
Posted: Sun Apr 28, 2024 4:47 pm Post subject: |
|
|
I convinced my parents to buy me an Atari Jaguar.
I do feel somewhat vindicated after seeing what people have been able to get out of them since, visually approaching PS1 or Saturn level stuff. Clearly the hardware was capable of more than what any of the published games ever produced, a step ablove the 3do, cdi etc. _________________ I spent a christmas in Vienna twenty something years ago. It was a beautiful city. Everyone was so friendly. |
|
Back to top |
|
|
OpenSauce04 n00b
Joined: 25 Apr 2024 Posts: 2
|
Posted: Sun Apr 28, 2024 6:38 pm Post subject: |
|
|
I don't remember exactly how it happened, but one time I was trying to delete everything inside a directory I was in, and typed in:
Turns out, I was in my home directory instead of the directory I thought I was in.
That was not a fun day
I now always use absolute paths when using rm -rf without exception. At least it was a learning experience. |
|
Back to top |
|
|
Goverp Advocate
Joined: 07 Mar 2007 Posts: 2179
|
Posted: Mon Apr 29, 2024 7:50 am Post subject: |
|
|
mrbassie wrote: | I convinced my parents to buy me an Atari Jaguar. ... |
Just be careful when you do an oil change _________________ Greybeard |
|
Back to top |
|
|
XaetaCore n00b
Joined: 11 Aug 2016 Posts: 25 Location: The Netherlands
|
Posted: Fri May 24, 2024 6:34 am Post subject: |
|
|
Not keeping up with `eselect news` then discovering that the reason for my system not updating correctly was the merged-usr i forgot to perform |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|