| View previous topic :: View next topic |
| Author |
Message |
wlmosv
n00b
Joined: 19 Apr 2024
Posts: 38
|
 Posted: Mon Apr 29, 2024 12:07 pm Post subject: Nvidia graphics card cannot be used after manually building |
 |
|
Hello everyone, when I manually compiled the kernel and loaded the modules and then completed the compilation, the xorg configuration seemed to be invalid when starting. I can only delete it and start kde.
| Code: | > Failed to emerge x11-drivers/nvidia-drivers-550.78, Log file:
>>> '/var/tmp/portage/x11-drivers/nvidia-drivers-550.78/temp/build.log'
* Messages for package x11-drivers/nvidia-drivers-550.78:
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built.
*
* Please verify that this is the intended kernel version, then perform
* a full build[1] (i.e. make && make modules_install && make install).
*
* Alternatively, consider a distribution kernel[2] that does not need
* these manual steps (e.g. sys-kernel/gentoo-kernel or gentoo-kernel-bin).
*
* [1] https://wiki.gentoo.org/wiki/Kernel/Configuration#Build
* [2] https://wiki.gentoo.org/wiki/Project:Distribution_Kernel
* ERROR: x11-drivers/nvidia-drivers-550.78::gentoo failed (setup phase):
* built kernel sources are required to build kernel modules
*
* Call stack:
* ebuild.sh, line 136: Called pkg_setup
* nvidia-drivers-550.78.ebuild, line 121: Called linux-mod-r1_pkg_setup
* linux-mod-r1.eclass, line 311: Called _modules_prepare_kernel
* linux-mod-r1.eclass, line 636: Called _modules_sanity_kernelbuilt
* linux-mod-r1.eclass, line 1061: Called die
* The specific snippet of code:
* die "built kernel sources are required to build kernel modules"
*
* If you need support, post the output of `emerge --info '=x11-drivers/nvidia-drivers-550.78::gentoo'`,
* the complete build log and the output of `emerge -pqv '=x11-drivers/nvidia-drivers-550.78::gentoo'`.
* The complete build log is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-550.78/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-drivers/nvidia-drivers-550.78/temp/die.env'.
* Working directory: '/var/tmp/portage/x11-drivers/nvidia-drivers-550.78/empty'
* S: '/var/tmp/portage/x11-drivers/nvidia-drivers-550.78/work'
wlmosv$
|
When I deleted the nvidia configuration, a new problem appeared. Is it because my kernel is not configured correctly?
this is my kernel .config:
https://0x0.st/XHk4.txt
dmesg:
https://bpa.st/YOPQ
My last nvidia configuration file was generated using nvidia-xconfig --prime, but when I generated it again this time, X11 could not start normally. This is the last xorg configuration file (I made a backup)：（6.8.7）
| Code: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 550.76
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Inactive "InactiveDevice1"
Inactive "InactiveDevice1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "InactiveDevice1"
Driver "modesetting"
VendorName "Unknown"
EndSection
Section "Device"
Identifier "InactiveDevice1"
Driver "modesetting"
VendorName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AllowEmptyInitialConfiguration" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
Since I cannot install the nvidia driver now, I cannot generate the configuration file
fastfetch：
| Code: | wlmosv$ fastfetch
-/oyddmdhs+:. wlmosv@wlmosv
-odNMMMMMMMMNNmhy+-` -------------
-yNMMMMMMMMMMMNNNmmdhy+- OS: Gentoo 2.15 x86_64
`omMMMMMMMMMMMMNmdmmmmddhhy/` Host: 81FW (Lenovo Legion Y7000)
omMMMMMMMMMMMNhhyyyohmdddhhhdo` Kernel: 6.8.8-gentoo-x86_64
.ydMMMMMMMMMMdhs++so/smdddhhhhdm+` Uptime: 19 mins
oyhdmNMMMMMMMNdyooydmddddhhhhyhNd. Packages: 1383 (emerge)
:oyhhdNNMMMMMMMNNNmmdddhhhhhyymMh Shell: bash 5.2.26
.:+sydNMMMMMNNNmmmdddhhhhhhmMmy Display (LGD05E5): 1920x1080 @ 60Hz
/mMMMMMMNNNmmmdddhhhhhmMNhs: DE: KDE Plasma 5.27.11
`oNMMMMMMMNNNmmmddddhhdmMNhs+` WM: KWin (X11)
`sNMMMMMMMMNNNmmmdddddmNMmhs/. WM Theme: plastik
/NMMMMMMMMNNNNmmmdddmNMNdso:` Theme: Breeze (Light) [QT], Adwaita-dark [GTK2/3/4]
+MMMMMMMNNNNNmmmmdmNMNdso/- Icons: breeze [QT], breeze [GTK2/3/4]
yMMNNNNNNNmmmmmNNMmhs+/-` Font: Noto Sans Osage (11pt) [QT], Noto Sans Osage (11pt) [GTK2/3/4]
/hMMNNNNNNNNMNdhs++/-` Cursor: breeze (24px)
`/ohdmmddhys+++/:.` Terminal: konsole 23.8.5
`-//////:--. Terminal Font: JetBrains Mono (11pt)
CPU: Intel(R) Core(TM) i5-8300H (8) @ 4.00 GHz
GPU 1: Intel UHD Graphics 630 @ 1.00 GHz
GPU 2: NVIDIA GeForce GTX 1050 Mobile
Memory: 2.92 GiB / 15.51 GiB (19%)
Swap: 0 B / 4.00 GiB (0%)
Disk (/): 223.56 GiB / 463.46 GiB (48%) - ext4
Local IP (wlan0): 10.202.211.250/16,10.202.212.77/16 *
Battery: 100% [AC Connected]
Locale: zh_CN.UTF-8
████████████████████████
████████████████████████
wlmosv$
|
_________________
学习他，成为他，超越他：Embrace the journey of learning from him, becoming like him, and ultimately surpassing him. |
|
| Back to top |
|
 |
logrusx
Advocate
Joined: 22 Feb 2018
Posts: 2412
|
| Posted: Mon Apr 29, 2024 2:41 pm Post subject: |
|
|
Here is the meaningful part of the error message:
| Code: |
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built. |
You haven't built your kernel.
Post the output of
| Code: | | equery list sys-kernel/* |
Best Regards,
Georgi |
|
| Back to top |
|
|
wlmosv
n00b
Joined: 19 Apr 2024
Posts: 38
|
| Posted: Mon Apr 29, 2024 3:03 pm Post subject: |
|
|
| logrusx wrote: | Here is the meaningful part of the error message:
| Code: |
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built. |
You haven't built your kernel.
Post the output of
| Code: | | equery list sys-kernel/* |
Best Regards,
Georgi |
hi
| Code: | wlmosv$ equery list sys-kernel/*
* Searching for * in sys-kernel ...
[IP-] [ ] sys-kernel/dracut-101:0
[IP-] [ ] sys-kernel/genkernel-4.3.12:0
[IP-] [ ] sys-kernel/gentoo-kernel-bin-6.8.8:6.8.8
[IP-] [ ] sys-kernel/gentoo-sources-6.8.8:6.8.8
[IP-] [ ] sys-kernel/installkernel-37:0
[IP-] [ ] sys-kernel/linux-firmware-20240410:0
[IP-] [ ] sys-kernel/linux-headers-6.8-r1:0
[IP-] [ ] sys-kernel/zen-sources-6.7.9:6.7.9
|
At present, I have recompiled the kernel but I don’t know if it will work. I executed make and make modules_install
and make install
_________________
学习他，成为他，超越他：Embrace the journey of learning from him, becoming like him, and ultimately surpassing him. |
|
| Back to top |
|
|
wlmosv
n00b
Joined: 19 Apr 2024
Posts: 38
|
| Posted: Mon Apr 29, 2024 3:13 pm Post subject: |
|
|
| logrusx wrote: | Here is the meaningful part of the error message:
| Code: |
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built. |
You haven't built your kernel.
Post the output of
| Code: | | equery list sys-kernel/* |
Best Regards,
Georgi |
it is worked! thank you!
_________________
学习他，成为他，超越他：Embrace the journey of learning from him, becoming like him, and ultimately surpassing him. |
|
| Back to top |
|
|
logrusx
Advocate
Joined: 22 Feb 2018
Posts: 2412
|
| Posted: Mon Apr 29, 2024 3:22 pm Post subject: |
|
|
| wlmosv wrote: | | logrusx wrote: | Here is the meaningful part of the error message:
| Code: |
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built. |
You haven't built your kernel.
Post the output of
| Code: | | equery list sys-kernel/* |
Best Regards,
Georgi |
it is worked! thank you! |
Did you boot the kernel you compiled? What does
| Code: | | lsmod | grep nvidia |
and
say?
Best Regards,
Georgi |
|
| Back to top |
|
|
wlmosv
n00b
Joined: 19 Apr 2024
Posts: 38
|
| Posted: Mon Apr 29, 2024 3:27 pm Post subject: |
|
|
| logrusx wrote: | | wlmosv wrote: | | logrusx wrote: | Here is the meaningful part of the error message:
| Code: |
* '/usr/src/linux/Module.symvers' was not found implying that the
* linux-6.8.8-gentoo tree at that location has not been built. |
You haven't built your kernel.
Post the output of
| Code: | | equery list sys-kernel/* |
Best Regards,
Georgi |
it is worked! thank you! |
Did you boot the kernel you compiled? What does
| Code: | | lsmod | grep nvidia |
say?
Best Regards,
Georgi |
yes
| Code: |
wlmosv$ lsmod | grep nvidia
nvidia_uvm 4714496 0
nvidia_drm 102400 23
nvidia_modeset 1552384 45 nvidia_drm
nvidia 59678720 814 nvidia_uvm,nvidia_modeset
video 77824 3 ideapad_laptop,i915,nvidia_modeset
drm_kms_helper 270336 3 drm_display_helper,nvidia_drm,i915
drm 774144 32 i2c_hid,drm_kms_helper,drm_display_helper,nvidia,drm_buddy,nvidia_drm,i915,ttm
i2c_core 135168 14 i2c_designware_platform,videodev,i2c_hid,i2c_designware_core,drm_kms_helper,i2c_algo_bit,drm_display_helper,ee1004,nvidia,i2c_smbus,i2c_i801,i2c_hid_acpi,i915,drm
backlight 28672 6 video,drm_display_helper,ideapad_laptop,i915,drm,nvidia_modeset
wlmosv$
|
look here | Code: | uname -r
6.8.8-gentoo-x86_64
wlmosv$ eselect kernel list
Available kernel symlink targets:
[1] linux-6.8.8-gentoo *
[2] linux-6.8.8-gentoo-dist
wlmosv$
|
But I still have a small problem, that is, my graphics card does not display power. I don’t know why, but it functions normally. like this
| Code: | nvidia-smi
Mon Apr 29 23:26:24 2024
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.78 Driver Version: 550.78 CUDA Version: 12.4 |
|-----------------------------------------+------------------------+----------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+========================+======================|
| 0 NVIDIA GeForce GTX 1050 Off | 00000000:01:00.0 Off | N/A |
| N/A 44C P5 N/A / ERR! | 568MiB / 4096MiB | 12% Default |
| | | N/A |
+-----------------------------------------+------------------------+----------------------+
+-----------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=========================================================================================|
| 0 N/A N/A 2517 G /usr/bin/X 201MiB |
| 0 N/A N/A 2901 G /usr/lib64/libexec/kf5/klauncher 1MiB |
| 0 N/A N/A 2931 G ...ib64/libexec/xdg-desktop-portal-kde 1MiB |
| 0 N/A N/A 2955 G /usr/bin/kded5 1MiB |
| 0 N/A N/A 2959 G /usr/bin/kwin_x11 37MiB |
| 0 N/A N/A 3000 G /usr/bin/ksmserver 1MiB |
| 0 N/A N/A 3014 G /usr/bin/kaccess 1MiB |
| 0 N/A N/A 3021 G /usr/bin/plasmashell 19MiB |
| 0 N/A N/A 3022 G ...c/polkit-kde-authentication-agent-1 1MiB |
| 0 N/A N/A 3066 G /usr/lib64/libexec/DiscoverNotifier 1MiB |
| 0 N/A N/A 3258 G /usr/lib64/libexec/baloorunner 1MiB |
| 0 N/A N/A 3264 G /usr/bin/konsole 1MiB |
| 0 N/A N/A 3747 G ...rowser/plugins --ozone-platform=x11 1MiB |
| 0 N/A N/A 3809 G ...71,262144 --variations-seed-version 84MiB |
| 0 N/A N/A 3963 G /usr/lib64/firefox/firefox 124MiB |
| 0 N/A N/A 4218 G ...bin/plasma-browser-integration-host 1MiB |
| 0 N/A N/A 4445 G ...erProcess --variations-seed-version 64MiB |
| 0 N/A N/A 4693 G /usr/bin/flameshot 1MiB |
| 0 N/A N/A 4711 G /usr/bin/telegram-desktop 1MiB |
|
_________________
学习他，成为他，超越他：Embrace the journey of learning from him, becoming like him, and ultimately surpassing him. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
