Gentoo Forums :: View topic - emerging new kernel-bin doesnt appear in /boot

emerging new kernel-bin doesnt appear in /boot

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

Portage & Programming

View previous topic :: View next topic

Author

Message

picarica
Guru
Guru

Joined: 11 Aug 2018
Posts: 326

Posted: Fri Jun 07, 2024 10:16 am Post subject: emerging new kernel-bin doesnt appear in /boot

so i have multiple machines with gentoo in it, and in my server in vmware vsphere i have been stuck on kernel 6.6.13 for a while beacuse when i update it doesnt appear in /boot nor anywhere

Code:

uname -a
Linux ****-test 6.6.13-gentoo-dist #1 [OBFUSCATED]

yet

Code:

sudo eselect kernel list
Available kernel symlink targets:
[1] linux-6.6.30-gentoo-dist

and

Code:

ls -l /boot/
total 101726
-rwxr-xr-x 1 root root 77312 May 23 16:06 amd-uc.img
-rwxr-xr-x 1 root root 249486 Jan 8 13:03 config-6.1.69-gentoo-dist
drwxr-xr-x 4 root root 512 May 23 16:30 fde5d4e1666643369b0542f386edc471
drwxr-xr-x 6 root root 512 Mar 25 10:58 grub
-rwxr-xr-x 1 root root 33455637 Jan 8 13:03 initramfs-6.1.69-gentoo-dist.img
-rwxr-xr-x 1 root root 35360701 Feb 8 10:19 initramfs-6.6.13-gentoo-dist.img
-rwxr-xr-x 1 root root 15677136 Feb 8 10:19 kernel-6.6.13-gentoo-dist
drwxr-xr-x 3 root root 512 Mar 7 12:39 loader
-rwxr-xr-x 1 root root 6294590 Jan 8 13:03 System.map-6.1.69-gentoo-dist
-rwxr-xr-x 1 root root 13048896 Jan 8 13:03 vmlinuz-6.1.69-gentoo-dist

i have no idea what is going on, i just tried to remerge kernel still doesnt appear in boot, idk what is going on, this is the only machine where this is happening

eeckwrk99
Apprentice

Joined: 14 Mar 2021
Posts: 231
Location: Gentoo forums

Posted: Fri Jun 07, 2024 10:35 am Post subject:

Maybe 2024-02-26 - installkernel is no longer implicitly installed? Do you have sys-kernel/installkernel installed?

logrusx
Advocate

Joined: 22 Feb 2018
Posts: 2435

Posted: Fri Jun 07, 2024 10:40 am Post subject: Re: emerging new kernel-bin doesnt appear in /boot

picarica wrote:

yet

Code:

sudo eselect kernel list
Available kernel symlink targets:
[1] linux-6.6.30-gentoo-dist

and

Code:

i have no idea what is going on, i just tried to remerge kernel still doesnt appear in boot, idk what is going on, this is the only machine where this is happening

Eselect does not do anything other than managing where the /usr/src/linux symlink points to.

In the same time, kernels that are already installed in /boot are separate from what eselect list shows. They actually do not belong to any package. I'm not sure if this is true for the bin kernels, but it should be. If you delete the sources, eselect won't show them.

Better tell us what procedure you followed.

p.s. are you using a separate partition for /boot? Did you mount it in advance?

eeckwrk99 wrote:

Maybe 2024-02-26 - installkernel is no longer implicitly installed?

Do you have sys-kernel/installkernel installed?

installkernel is no longer implicitly installed news item wrote:

No manual action is required for users of the distribution kernels:
- sys-kernel/gentoo-kernel, or
- sys-kernel/gentoo-kernel-bin, or
- sys-kernel/vanilla-kernel

Best Regards,
Georgi

picarica
Guru
Guru

Joined: 11 Aug 2018
Posts: 326

Posted: Fri Jun 07, 2024 10:49 am Post subject:

eeckwrk99 wrote:

Maybe 2024-02-26 - installkernel is no longer implicitly installed?

Do you have sys-kernel/installkernel installed?

Code:

emerge -s installkernel

[ Results for search key : installkernel ]
Searching...

* dev-python/installer
Latest version available: 0.7.0
Latest version installed: 0.7.0
Size of files: 907 KiB
Homepage: https://pypi.org/project/installer/ https://github.com/pypa/installer/ https://installer.readthedocs.io/en/latest/
Description: A library for installing Python wheels
License: MIT

* sys-kernel/installkernel
Latest version available: 28
Latest version installed: 28
Size of files: 19 KiB
Homepage: https://github.com/projg2/installkernel-gentoo https://wiki.gentoo.org/wiki/Installkernel
Description: Gentoo fork of installkernel script from debianutils
License: GPL-2+

[ Applications found : 2 ]

yes it is i noticed the news read back then i added the use flag for it if remember correctly

Quote:

p.s. are you using a separate partition for /boot? Did you mount it in advance?

for this
its a really simple basci intallation with all in one simple disk

Code:

udo fdisk -l
Disk /dev/sda: 52 GiB, 55834574848 bytes, 109051904 sectors
Disk model: Virtual disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01cd07f3

Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 526335 524288 256M 83 Linux
/dev/sda2 526336 8914943 8388608 4G 82 Linux swap / Solaris
/dev/sda3 8914944 109051903 100136960 47.7G 83 Linux

Quote:

They actually do not belong to any package.

and this may be trueb ecause i dont have those kernels merge, but i am little scared to do eclean-kernel.

logrusx
Advocate

Joined: 22 Feb 2018
Posts: 2435

Posted: Fri Jun 07, 2024 10:54 am Post subject:

I edited my replay before you posted yours. Please read ti again. Also, is this a BIOS/MBR system?

Also:

Code:

equery list sys-kernel/*

Best Regards,
Georgi

picarica
Guru
Guru

Joined: 11 Aug 2018
Posts: 326

Posted: Fri Jun 07, 2024 11:20 am Post subject:

logrusx wrote:

I edited my replay before you posted yours. Please read ti again. Also, is this a BIOS/MBR system?

Also:

Code:

equery list sys-kernel/*

Best Regards,
Georgi

Code:

equery list sys-kernel/*
* Searching for * in sys-kernel ...
[IP-] [ ] sys-kernel/dracut-060_pre20240104-r4:0
[IP-] [ ] sys-kernel/gentoo-kernel-bin-6.6.30:6.6.30
[IP-] [ ] sys-kernel/installkernel-28:0
[IP-] [ ] sys-kernel/linux-firmware-20240513:0
[IP-] [ ] sys-kernel/linux-headers-6.6-r1:0

i didnt noticed any edit on your reply, am i missing something ? also yes its mios/mbr

Code:

sudo fdisk -l
Disk /dev/sda: 52 GiB, 55834574848 bytes, 109051904 sectors
Disk model: Virtual disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01cd07f3

Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 526335 524288 256M 83 Linux
/dev/sda2 526336 8914943 8388608 4G 82 Linux swap / Solaris
/dev/sda3 8914944 109051903 100136960 47.7G 83 Linux

grknight
Retired Dev

Joined: 20 Feb 2015
Posts: 1921

Posted: Fri Jun 07, 2024 12:43 pm Post subject:

picarica wrote:

Code:

ls -l /boot/
drwxr-xr-x 4 root root 512 May 23 16:30 fde5d4e1666643369b0542f386edc471

The kernel is likely in this subdirectory if installkernel is calling systemd's kernel-install. See https://wiki.gentoo.org/wiki/Installkernel for how to control options to your liking besides the USE flags as well; including the traditional install locations. It could also be under /efi depending on the configuration.

picarica
Guru
Guru

Joined: 11 Aug 2018
Posts: 326

Posted: Fri Jun 07, 2024 1:08 pm Post subject:

grknight wrote:

picarica wrote:

Code:

ls -l /boot/
drwxr-xr-x 4 root root 512 May 23 16:30 fde5d4e1666643369b0542f386edc471

you're right

Code:

ls fde5d4e1666643369b0542f386edc471/
6.6.28-gentoo-dist 6.6.30-gentoo-dist

and these are my only use flags ever

Code:

USE="-openmp systemd-boot"

# package.use# required by sys-kernel/gentoo-kernel-bin-6.6.13::gentoo[initramfs]
# required by virtual/dist-kernel-6.6.13::gentoo
>=sys-kernel/installkernel-24 dracut
# required by sys-kernel/installkernel-24::gentoo[systemd-boot]
# required by sys-apps/debianutils-5.14::gentoo[installkernel]
# required by sys-process/cronie-1.7.1-r1::gentoo
# required by virtual/cron-0-r3::gentoo
# required by @selected
# required by @world (argument)
>=sys-apps/systemd-254.8-r1 boot

grknight
Retired Dev

Joined: 20 Feb 2015
Posts: 1921

Posted: Fri Jun 07, 2024 1:23 pm Post subject:

picarica wrote:

and these are my only use flags ever

Code:

By setting systemd-boot USE, you signal installkernel that grub will be ignored and prepare for systemd-boot (formerly known as gummiboot) to be called instead.
This can be also overridden in a config file noted by the wiki page.

picarica
Guru
Guru

Joined: 11 Aug 2018
Posts: 326

Posted: Wed Jun 12, 2024 11:01 am Post subject:

grknight wrote:

picarica wrote:

and these are my only use flags ever

Code:

yes thank you solved it by remove systemd-boot use flag, wont it have some consequences tho ?

eeckwrk99
Apprentice

Joined: 14 Mar 2021
Posts: 231
Location: Gentoo forums

Posted: Wed Jun 12, 2024 11:14 am Post subject:

picarica wrote:

yes thank you solved it by remove systemd-boot use flag, wont it have some consequences tho ?

No, since you're using GRUB.

Display posts from previous:

	Gentoo Forums Forum Index Portage & Programming	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy