| View previous topic :: View next topic |
| Author |
Message |
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
 Posted: Fri Jun 14, 2024 11:44 am Post subject: [DOWNGRADED]System settings unuseable |
 |
|
Hello all:
There is a surprise for ~amd64 branch users, Plasma:6 got unmask and I updated it when I found it(I thought it will be unmasked when 6.1 released || Bugs that mentioned were solved)
BUT I got some problem:
1.The sddm is not scaling correctly as I was expacting(or should it be),I use a 27 inch 3840 by 2160 screen with X11 (Yes, I am still on Xorg), I did some configuration in /etc/sddm.conf.d as man sddm.conf told me for enabling HiDPI support and set cursor themme&size (SMALL PROBLEM)
It was working fine yesterday and today is not
2.I can not use most of the systemsettings, for example Desktop Session, Auto Start, Power Management, Region & Language, etc.
Every single one of them prints this on screen
| Code: |
qrc:/kcm/kcm_regionandlang/main.qml:26 Type Kirigami.InlineMessage unavailable
file:///usr/lib64/qt6/qml/org/kde/kirigami/InlineMessage.qml:63 Type KT.InlineMessage unavailable
qrc:/qt/qml/org/kde/kirigami/templates/InlineMessage.qml:123 Cannot assign object of type "TP.IconPropertiesGroup" to property of type "IconPropertiesGroup_QMLTYPE_36*" as the former is neither the same as the latter nor a sub-class of it.
|
I am not familiar with QT at all so.....(BIG PROBLEM)
EDIT: When screen is locking, I can see only the mouse pointer and a black background (no background image shown)
Anyone else getting same issue?
Any lessons that I have missed and should have learned?
Please check
Last edited by nurali on Sun Jun 16, 2024 4:34 pm; edited 1 time in total |
|
| Back to top |
|
 |
rab0171610
Guru
Joined: 24 Dec 2022
Posts: 423
|
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Fri Jun 14, 2024 4:03 pm Post subject: |
|
|
| rab0171610 wrote: | https://bugs.kde.org/show_bug.cgi?id=488326
Probably a work in progress . . . |
Thanks for replying and sharing the bug link
Looks like I have to wait then.....
I'm kinda regretting updating it to 6 right now |
|
| Back to top |
|
|
Chiitoo
Administrator
Joined: 28 Feb 2010
Posts: 2729
Location: Here and Away Again
|
| Posted: Fri Jun 14, 2024 7:22 pm Post subject: |
|
|
Do the system settings work the same with a fresh, clean user with no config files around?
I have not seen this issue in my LXQt set-ups (where I only have minimal bits of KF and friends to use KWin), nor my full Plasma testing set-ups so far.
I generally don't use a display-manager nor screen-locking, so don't really have ideas on those right now.
_________________
Kindest of regardses. |
|
| Back to top |
|
|
rab0171610
Guru
Joined: 24 Dec 2022
Posts: 423
|
| Posted: Sat Jun 15, 2024 3:46 am Post subject: |
|
|
Are we seeing the full extent of the error messages or did you by chance truncate them?
In console, type as your user:
| Code: | | kcmshell6 kcm_regionandlang |
Does the system settings region and language tab run correctly? If not, please post the full output from the terminal.
Try deleting your cache (~/.cache/*). There may be previously cached qml files interfering. Log out and log back in again.
Do as Chiitoo suggested and start a KDE Plasma session with a new user. The new user would have an empty default KDE Plasma config. Does the problem still persist? There may be configuration files in ~/.config that are incompatible with the upgrade. There also may be plasmoids or custom themes that are creating issues. Trying to replicate your problem with a new user will help eliminate those as a cause of the problem.
If none of that helps, I would file a bug report detailing the steps you took in your report to isolate and eliminate the problem. |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Sat Jun 15, 2024 10:57 am Post subject: |
|
|
| Chiitoo wrote: | Do the system settings work the same with a fresh, clean user with no config files around?
I have not seen this issue in my LXQt set-ups (where I only have minimal bits of KF and friends to use KWin), nor my full Plasma testing set-ups so far.
I generally don't use a display-manager nor screen-locking, so don't really have ideas on those right now. |
Sorry for late replying, I was busy on some other things today
I tried creating a new user and switch to that new user, system settings are perfectly working, not anymore those error messages....
Should I delete any config file? |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Sat Jun 15, 2024 11:04 am Post subject: |
|
|
| rab0171610 wrote: | Are we seeing the full extent of the error messages or did you by chance truncate them?
In console, type as your user:
| Code: | | kcmshell6 kcm_regionandlang |
Does the system settings region and language tab run correctly? If not, please post the full output from the terminal.
Try deleting your cache (~/.cache/*). There may be previously cached qml files interfering. Log out and log back in again.
Do as Chiitoo suggested and start a KDE Plasma session with a new user. The new user would have an empty default KDE Plasma config. Does the problem still persist? There may be configuration files in ~/.config that are incompatible with the upgrade. There also may be plasmoids or custom themes that are creating issues. Trying to replicate your problem with a new user will help eliminate those as a cause of the problem.
If none of that helps, I would file a bug report detailing the steps you took in your report to isolate and eliminate the problem. |
Thanks for replying
I deleted ~/.cache/* and systemsettings is useable now, every module of it can be opened
And I tried but lockscreen is still black, can only see the cursor pointer (this is same in a new test users environment)
The sddm is still not scaling correctly..... |
|
| Back to top |
|
|
rab0171610
Guru
Joined: 24 Dec 2022
Posts: 423
|
| Posted: Sat Jun 15, 2024 5:44 pm Post subject: |
|
|
At least you are moving in the right direction.
Are you using X11 or Wayland session? If using X, try a Wayland session to see if the problem occurs there as well and vice versa.
Again, determine if it is a configuration issue or a bug:
Does the lockscreen issue still occur with a new user?
Are you using X11 or Wayland session?
You already deleted the cache, so you can probably rule that out as a factor, but you could do it again just to be sure.
Did you previously, under KDE 5, modify your lockscreen settings? Custom background image, etc?
I would recommend going to the system settings tab for the lockscreen settings. Adjust the settings to default and apply. If that doesn't fix the issue, For testing purposes, I would try changing the background type from image to solid color, apply the settings and see if the issue is the same.
There are a lot of bug reports and forum postings floating around about this same issue on KDE 6. Some have been resolved, some are still open. I would look over those and see if you find any bugs or fixes that may apply to you. Monitor those reports for changes or progress.
Again, be willing to file a bug and clearly but briefly outline the steps you have taken to correct or isolate the problem. |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Sun Jun 16, 2024 1:12 am Post subject: |
|
|
| rab0171610 wrote: | At least you are moving in the right direction.
Are you using X11 or Wayland session? If using X, try a Wayland session to see if the problem occurs there as well and vice versa.
Again, determine if it is a configuration issue or a bug:
Does the lockscreen issue still occur with a new user?
Are you using X11 or Wayland session?
You already deleted the cache, so you can probably rule that out as a factor, but you could do it again just to be sure.
Did you previously, under KDE 5, modify your lockscreen settings? Custom background image, etc?
I would recommend going to the system settings tab for the lockscreen settings. Adjust the settings to default and apply. If that doesn't fix the issue, For testing purposes, I would try changing the background type from image to solid color, apply the settings and see if the issue is the same.
There are a lot of bug reports and forum postings floating around about this same issue on KDE 6. Some have been resolved, some are still open. I would look over those and see if you find any bugs or fixes that may apply to you. Monitor those reports for changes or progress.
Again, be willing to file a bug and clearly but briefly outline the steps you have taken to correct or isolate the problem. |
Sorry for late replying
I am launching Plasma with Plasma(X11) session, I tried Plasma(Wayland), screenlock is normal
Yes, promblem is still there with a new user
I am X11 user for now
When I was using Plasma:5 I did not modify much systemsettings, at least not lockscreen settings, I simply changed a cursor theme for appearance
I tried applying defaults to settings, but did not work. But I found this now:
On X11 session, lock screen -> go black and if I kill the power of my monitor and start it again, I can see the lockscreen go back to normal, then I can lock or unlock it whenever I want, never goes black. But if I reboot the computer, I have to reboot the monitor also when system is on lockscreen state, then I can see lockscreen background image and everything.
Please check |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Sun Jun 16, 2024 1:47 am Post subject: |
|
|
| rab0171610 wrote: | There are a lot of bug reports and forum postings floating around about this same issue on KDE 6. Some have been resolved, some are still open. I would look over those and see if you find any bugs or fixes that may apply to you. Monitor those reports for changes or progress.
Again, be willing to file a bug and clearly but briefly outline the steps you have taken to correct or isolate the problem. |
I copy-pasted part of systemlog. I tried lock screen -> restart monitor by pressing it's power button -> login on this special time period
This is the log: http://0x0.st/XcUX.txt
My current monitor's ID is 84, connected on DP port |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Sun Jun 16, 2024 4:33 pm Post subject: |
|
|
| Downgraded Plasma version to slot 5, masked all Plasma:6 applications, everything are working fine now. I think this thread ends here |
|
| Back to top |
|
|
asturm
Developer
Joined: 05 Apr 2007
Posts: 9276
|
| Posted: Mon Jun 17, 2024 4:25 pm Post subject: |
|
|
Why didn't you supply your logs to the upstream bug? It might have been valuable information to solve it.
| rab0171610 wrote: | | https://bugs.kde.org/show_bug.cgi?id=488326 |
As you can see, it is in NEEDSINFO state. |
|
| Back to top |
|
|
nurali
Apprentice
Joined: 17 Nov 2022
Posts: 182
Location: Somewhere,Earth
|
| Posted: Mon Jun 17, 2024 4:36 pm Post subject: |
|
|
| asturm wrote: | Why didn't you supply your logs to the upstream bug? It might have been valuable information to solve it.
| rab0171610 wrote: | | https://bugs.kde.org/show_bug.cgi?id=488326 |
As you can see, it is in NEEDSINFO state. |
I have communicated with several Gentoo users, they also got this systemsettings issue, and seems like reported already.
To the screenlock issue and sddm scaling issue, for now seems like onle I got it, it is maybe caused by local config.
I have a project to finish right now, don't have much time for tracking and confirming, so...
I decided to finish my current work and update again to 6, if I get these issues again, I will report and seek for help on upstream |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
