| View previous topic :: View next topic |
| Author |
Message |
FastTurtle
Guru
Joined: 03 Sep 2002
Posts: 499
Location: Flakey Shake & Bake Caliornia, USA
|
 Posted: Sun Jun 16, 2024 12:57 am Post subject: Refind Boot Questions |
 |
|
I've managed to get to the point of a kernel panic with | Code: | | not syncing vfs unable to mount root fs on unknown-block(0,0) |
using Refind as the boot manager.
Been doing some major reading in hopes of solving instead of having to restart the entire build and one comment in the EFI Stub Guide was using a partuuid= and passing it on the kernel command line. Can I add the partuuid= to the Refind Config so it passes it to the kernel on boot and what would it look like? The example in the Guide | Code: | | /dev/sda3: UUID="d1e0c1e0-3a40-42c5-8931-cfa2c7deae32" TYPE="ext4" PARTUUID="adf55784-15d9-4ca3-bb3f-56de0b35d88d" |
is not extremely clear to me. I don't use an Initramfs as the critical features are built in (limited hardware, with some modules for stuff such as networking (ethernet/wifi) and sound if that helps
As stated, I already have everything built for a minimal install that can then complete everything else and am hoping that I'll be able to solve the kernel panic and actually get the blasted thing to boot. |
|
| Back to top |
|
 |
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9824
Location: almost Mile High in the USA
|
| Posted: Sun Jun 16, 2024 2:49 am Post subject: |
|
|
You'll need to either use efibootmgr with -u to specify your root partition (not supported by all efi firmware implementations) or hardcode the root partition with CONFIG_CMDLINE in your kernel config in order for the kernel to find where your rootfs is.
I don't like hardcoding through efibootmgr or kernel, one false bios config and machine becomes unbootable unless you change back or use recovery image...
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
FastTurtle
Guru
Joined: 03 Sep 2002
Posts: 499
Location: Flakey Shake & Bake Caliornia, USA
|
| Posted: Sun Jun 16, 2024 2:57 am Post subject: |
|
|
Refind is supposed to include efiboot-mgr though I'll have to check. As to the "partuuid=" seems to be related to either an initrd or cpio archive and I don't use either of them. I've read most of the posts in regards to getting the efi stub to boot, including the forum posts that seem to have helped someone solve the problem so it looks as though I have more reading to do.
Reading the EFI stub guide again, it does show the -u needs to be used with efibootmgr and gives an example. It also states that a partuuid is fine with efibootmgr as the other solution requires the initramfs (initrd) or cpio solution that I don't use. Don't see a need when I know all of the hardware and don't change thing often enough for it to be a problem
_________________
AsRock B550 Phantom Gaming 4
128GB 3200 Mhz memory
1TB NVME as the boot disk
4x 4TB Sata - 2x 2TB Sata SSD - 4x 450GB SaS - 3x 900GB SaS - 72GB SaS for Gentoo system disk
LSI 9300-16i in HBA mode for all spinning disks
Radeon 6800 (Non XT) for GPU |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 1913
|
| Posted: Sun Jun 16, 2024 3:51 am Post subject: |
|
|
rEFInd will read from refind_linux.conf for kernel options. It is often created when running refind-install with the necessary root partition details written to it but may be modified if they are incorrect.
In addition, rEFInd can edit boot parameters in its menu selection similar to GRUB.
If the panic message does not show a list of partitions available next to that vfs unknown-block message, then the driver for the disk is not present or not ready. More details on the device would be helpful as well as what the kernel config is. |
|
| Back to top |
|
|
skellr
l33t
Joined: 18 Jun 2005
Posts: 978
Location: The Village, Portmeirion
|
| Posted: Sun Jun 16, 2024 5:38 am Post subject: Re: Refind Boot Questions |
|
|
| FastTurtle wrote: | I've managed to get to the point of a kernel panic with | Code: | | not syncing vfs unable to mount root fs on unknown-block(0,0) |
using Refind as the boot manager.
|
unknown-block(0,0) means the kernel doesn't have the drivers to read the device. This is the main issue.
| FastTurtle wrote: | | ...one comment in the EFI Stub Guide was using a partuuid= and passing it on the kernel command line. |
You are on the right track with this. When the kernel doesn't have an initrd/initramfs it doesn't know how find a filesystem UUID or LABEL, it can only determine a partition PARTUUID and then it will do guesswork to figure out what filesystem in in the partition.
You are just missing the device driver for your disk in the kernel. Maybe its a SATA driver or NVME? |
|
| Back to top |
|
|
FastTurtle
Guru
Joined: 03 Sep 2002
Posts: 499
Location: Flakey Shake & Bake Caliornia, USA
|
| Posted: Thu Jun 20, 2024 7:08 pm Post subject: |
|
|
Thanks all for the feedback on the unknown block. Not sure why the kernel can't read it as the driver is built in unless the issue is the LSI card (could be) but even then I built the drivers/features in for LSI.
As I ordered a replacement 9300-16i card, I'll be testing over the weekend. One thing I'll have to check is whether I disabled the | Code: | | build-in command line |
for the kernel. If I did and I do things like that by default to reduce kernel size, it could be the root cause of the problem but the partuuid makes sense not only for the kernel to boot correctly but fstab use to ensure things are on the correct partitions, which is the biggest advantage of GPT partitioned drives.
My thinking is still stuck on Lilo as that was the only reliable way to get the system to boot. The attempt resulted in the same/similar error although I was using a full MBR/Legacy configured disk. Hopefully, I'll solve this problem and get the system to boot correctly.
_________________
AsRock B550 Phantom Gaming 4
128GB 3200 Mhz memory
1TB NVME as the boot disk
4x 4TB Sata - 2x 2TB Sata SSD - 4x 450GB SaS - 3x 900GB SaS - 72GB SaS for Gentoo system disk
LSI 9300-16i in HBA mode for all spinning disks
Radeon 6800 (Non XT) for GPU |
|
| Back to top |
|
|
|
Kernel & Hardware
