| View previous topic :: View next topic |
| Author |
Message |
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
 Posted: Mon Jun 24, 2024 9:40 pm Post subject: **SOLVED** X11 on Amlogic S905X board (Libre Sweet Potato) |
 |
|
Trying to get X11 working on a libre sweet potato board running a mainline gentoo-sources originated kernel (6.6.30). I'm assuming my issue is that I I need to manually define something in a xorg.conf file for it, but I dont know what.
Keeping this one simple for now. Raw X11 session. No Gnome, kde, etc...
| Code: |
$ cat Xorg.0.log
[ 210.443]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 210.444] Current Operating System: Linux swpotato 6.6.30-gentoo #2 SMP PREEMPT_DYNAMIC Sat Jun 15 12:38:05 CDT 2024 aarch64
[ 210.444] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.30-gentoo root=/dev/mmcblk1p4
[ 210.444]
[ 210.444] Current version of pixman: 0.43.4
[ 210.445] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 210.445] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 210.446] (==) Log file: "/home/cvanallen/.local/share/xorg/Xorg.0.log", Time: Mon Jun 24 16:33:02 2024
[ 210.455] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 210.459] (==) No Layout section. Using the first Screen section.
[ 210.459] (==) No screen section available. Using defaults.
[ 210.459] (**) |-->Screen "Default Screen Section" (0)
[ 210.459] (**) | |-->Monitor "<default monitor>"
[ 210.460] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 210.460] (**) Allowing byte-swapped clients
[ 210.460] (==) Automatically adding devices
[ 210.460] (==) Automatically enabling devices
[ 210.460] (==) Automatically adding GPU devices
[ 210.460] (==) Automatically binding GPU devices
[ 210.460] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 210.463] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 210.463] Entry deleted from font path.
[ 210.464] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 210.464] Entry deleted from font path.
[ 210.464] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 210.464] Entry deleted from font path.
[ 210.464] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 210.464] Entry deleted from font path.
[ 210.464] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 210.464] Entry deleted from font path.
[ 210.464] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 210.464] Entry deleted from font path.
[ 210.464] (==) FontPath set to:
[ 210.464] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 210.464] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 210.464] (II) Module ABI versions:
[ 210.464] X.Org ANSI C Emulation: 0.4
[ 210.464] X.Org Video Driver: 25.2
[ 210.464] X.Org XInput driver : 24.4
[ 210.464] X.Org Server Extension : 10.0
[ 210.470] (++) using VT number 1
[ 210.480] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 210.485] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 210.485] (II) Platform probe for /sys/devices/platform/soc/d0000000.apb/d00c0000.gpu/drm/card1
[ 210.491] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 210.493] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 210.493] (II) Platform probe for /sys/devices/platform/soc/d0100000.vpu/drm/card0
[ 210.498] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 210.499] (II) no primary bus or device found
[ 210.499] falling back to /sys/devices/platform/soc/d0000000.apb/d00c0000.gpu/drm/card1
[ 210.499] (II) LoadModule: "glx"
[ 210.509] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 210.552] (II) Module glx: vendor="X.Org Foundation"
[ 210.552] compiled for 1.21.1.13, module version = 1.0.0
[ 210.552] ABI class: X.Org Server Extension, version 10.0
[ 210.552] (==) Matched modesetting as autoconfigured driver 0
[ 210.552] (==) Matched fbdev as autoconfigured driver 1
[ 210.552] (==) Assigned the driver to the xf86ConfigLayout
[ 210.552] (II) LoadModule: "modesetting"
[ 210.553] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 210.571] (II) Module modesetting: vendor="X.Org Foundation"
[ 210.571] compiled for 1.21.1.13, module version = 1.21.1
[ 210.572] Module class: X.Org Video Driver
[ 210.572] ABI class: X.Org Video Driver, version 25.2
[ 210.572] (II) LoadModule: "fbdev"
[ 210.573] (WW) Warning, couldn't open module fbdev
[ 210.573] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 210.573] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 210.573] (WW) Falling back to old probe method for modesetting
[ 210.574] (II) modeset(0): using default device
[ 210.574] (II) modeset(G0): using drv /dev/dri/card0
[ 210.574] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 210.574] (EE)
Fatal server error:
[ 210.574] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 210.574] (EE)
[ 210.574] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 210.574] (EE) Please also check the log file at "/home/cvanallen/.local/share/xorg/Xorg.0.log" for additional information.
[ 210.574] (EE)
[ 210.592] (EE) Server terminated with error (1). Closing log file.
|
| Code: |
$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.30-gentoo (root@swpotato) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.41 p5) 2.41.0) #2 SMP PREEMPT_DYNAMIC Sat Jun 15 12:38:05 CDT 2024
[ 0.000000] KASLR enabled
[ 0.000000] Machine model: Libre Computer AML-S905X-CC V2
[ 0.000000] efi: EFI v2.10 by Das U-Boot
[ 0.000000] efi: RTPROP=0x74e85040 SMBIOS=0x74e84000 RNG=0x6fc39040 MEMRESERVE=0x6a7bd040
[ 0.000000] random: crng init done
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000005a400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000005a400000..0x000000006a3fffff (262144 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x0000000000ffffff (16384 KiB) nomap non-reusable hwrom@0
[ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000
[ 0.000000] OF: reserved mem: 0x0000000010000000..0x00000000101fffff (2048 KiB) nomap non-reusable secmon@10000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000074e83fff]
[ 0.000000] node 0: [mem 0x0000000074e84000-0x0000000074e85fff]
[ 0.000000] node 0: [mem 0x0000000074e86000-0x0000000074e86fff]
[ 0.000000] node 0: [mem 0x0000000074e87000-0x0000000074e8cfff]
[ 0.000000] node 0: [mem 0x0000000074e8d000-0x000000007de9ffff]
[ 0.000000] node 0: [mem 0x000000007dea0000-0x000000007deaffff]
[ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007f806fff]
[ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 31 pages/cpu s87528 r8192 d31256 u126976
[ 0.000000] pcpu-alloc: s87528 r8192 d31256 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.30-gentoo root=/dev/mmcblk1p4
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.6.30-gentoo", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000077e00000-0x000000007be00000] (64MB)
[ 0.000000] Memory: 1630288K/2097152K available (20608K kernel code, 3638K rwdata, 15560K rodata, 8768K init, 801K bss, 204720K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 65735 entries in 257 pages
[ 0.000000] ftrace: allocated 257 pages with 2 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] Dynamic Preempt: full
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000709] Console: colour dummy device 80x25
[ 0.000722] printk: console [tty0] enabled
[ 0.001350] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001376] pid_max: default: 32768 minimum: 301
[ 0.001482] LSM: initializing lsm=capability,yama,integrity
[ 0.001510] Yama: becoming mindful.
[ 0.001611] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001638] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003177] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003267] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003366] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003548] rcu: Hierarchical SRCU implementation.
[ 0.003561] rcu: Max phase no-delay instances is 1000.
[ 0.004808] Remapping and enabling EFI services.
[ 0.005182] smp: Bringing up secondary CPUs ...
[ 0.006001] Detected VIPT I-cache on CPU1
[ 0.006119] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007005] Detected VIPT I-cache on CPU2
[ 0.007110] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.008013] Detected VIPT I-cache on CPU3
[ 0.008123] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.008225] smp: Brought up 1 node, 4 CPUs
[ 0.008298] SMP: Total of 4 processors activated.
[ 0.008312] CPU features: detected: 32-bit EL0 Support
[ 0.008322] CPU features: detected: 32-bit EL1 Support
[ 0.008335] CPU features: detected: CRC32 instructions
[ 0.008421] CPU: All CPU(s) started at EL2
[ 0.008442] alternatives: applying system-wide alternatives
[ 0.010501] devtmpfs: initialized
[ 0.017118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.017173] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.023639] pinctrl core: initialized pinctrl subsystem
[ 0.024175] SMBIOS 3.0 present.
[ 0.024222] DMI: libre-computer aml-s905x-cc-v2/aml-s905x-cc-v2, BIOS 2023.07+ 07/01/2023
[ 0.024271] regulator-dummy: no parameters, enabled
[ 0.024676] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.025671] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.025825] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.025976] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.026098] audit: initializing netlink subsys (disabled)
[ 0.026328] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
[ 0.027635] thermal_sys: Registered thermal governor 'fair_share'
[ 0.027652] thermal_sys: Registered thermal governor 'step_wise'
[ 0.027675] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.027773] cpuidle: using governor menu
[ 0.027914] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.028045] ASID allocator initialised with 32768 entries
[ 0.040976] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.041237] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.041310] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /soc/vpu@d0100000
[ 0.042179] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
[ 0.042262] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.045008] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.045045] Modules: 0 pages in range for non-PLT usage
[ 0.045049] Modules: 511904 pages in range for PLT usage
[ 0.045864] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.045908] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.045922] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.045934] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.045947] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045960] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.045973] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.045985] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.112353] raid6: neonx8 gen() 2262 MB/s
[ 0.180405] raid6: neonx4 gen() 2212 MB/s
[ 0.248468] raid6: neonx2 gen() 2126 MB/s
[ 0.316527] raid6: neonx1 gen() 1822 MB/s
[ 0.384576] raid6: int64x8 gen() 1414 MB/s
[ 0.452637] raid6: int64x4 gen() 1571 MB/s
[ 0.520706] raid6: int64x2 gen() 1400 MB/s
[ 0.588770] raid6: int64x1 gen() 1033 MB/s
[ 0.588785] raid6: using algorithm neonx8 gen() 2262 MB/s
[ 0.656810] raid6: .... xor() 1650 MB/s, rmw enabled
[ 0.656824] raid6: using neon recovery algorithm
[ 0.657117] fbcon: Taking over console
[ 0.657671] DC_IN: 5000 mV, enabled
[ 0.657807] iommu: Default domain type: Passthrough
[ 0.657852] reg-fixed-voltage regulator-dc_in: DC_IN supplying 5000000uV
[ 0.658223] SCSI subsystem initialized
[ 0.658439] libata version 3.00 loaded.
[ 0.658656] usbcore: registered new interface driver usbfs
[ 0.658699] usbcore: registered new interface driver hub
[ 0.658745] usbcore: registered new device driver usb
[ 0.659233] pps_core: LinuxPPS API ver. 1 registered
[ 0.659248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.659274] PTP clock support registered
[ 0.659422] EDAC MC: Ver: 3.0.0
[ 0.660124] scmi_core: SCMI protocol bus registered
[ 0.660228] efivars: Registered efivars operations
[ 0.660864] FPGA manager framework
[ 0.660993] Advanced Linux Sound Architecture Driver Initialized.
[ 0.661835] NetLabel: Initializing
[ 0.661854] NetLabel: domain hash size = 128
[ 0.661865] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.661933] NetLabel: unlabeled traffic allowed by default
[ 0.662321] clocksource: Switched to clocksource arch_sys_counter
[ 0.662767] VFS: Disk quotas dquot_6.6.0
[ 0.662819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.662978] FS-Cache: Loaded
[ 0.669226] NET: Registered PF_INET protocol family
[ 0.669417] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.671166] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.671274] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.671303] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.671423] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.671826] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.672087] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.672186] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.672242] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.672428] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.672957] RPC: Registered named UNIX socket transport module.
[ 0.672994] RPC: Registered udp transport module.
[ 0.673005] RPC: Registered tcp transport module.
[ 0.673015] RPC: Registered tcp-with-tls transport module.
[ 0.673026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.673045] NET: Registered PF_XDP protocol family
[ 0.673073] PCI: CLS 0 bytes, default 64
[ 0.673313] Trying to unpack rootfs image as initramfs...
[ 0.682599] kvm [1]: IPA Size Limit: 40 bits
[ 0.685800] kvm [1]: vgic interrupt IRQ9
[ 0.685866] kvm [1]: Hyp mode initialized successfully
[ 1.096894] Initialise system trusted keyrings
[ 1.097246] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.097650] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.098060] NFS: Registering the id_resolver key type
[ 1.098118] Key type id_resolver registered
[ 1.098131] Key type id_legacy registered
[ 1.098164] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.098180] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.098997] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.099618] 9p: Installing v9fs 9p2000 file system support
[ 1.134070] xor: measuring software checksum speed
[ 1.138049] 8regs : 2522 MB/sec
[ 1.142025] 32regs : 2522 MB/sec
[ 1.146367] arm64_neon : 2321 MB/sec
[ 1.146404] xor: using function: 32regs (2522 MB/sec)
[ 1.146436] Key type asymmetric registered
[ 1.146450] Asymmetric key parser 'x509' registered
[ 1.146555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.146833] io scheduler mq-deadline registered
[ 1.146866] io scheduler kyber registered
[ 1.146922] io scheduler bfq registered
[ 1.147354] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 1.171325] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
[ 1.176733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.180401] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.180475] printk: console [ttyAML0] enabled
[ 1.664602] Freeing initrd memory: 18376K
[ 1.671316] display-connector hdmi-connector: Looking up hdmi-pwr-supply from device tree
[ 2.437800] display-connector hdmi-connector: Looking up hdmi-pwr-supply property in node /hdmi-connector failed
[ 2.445003] loop: module loaded
[ 2.445610] Loading iSCSI transport class v2.0-870.
[ 2.447977] iscsi: registered transport (tcp)
[ 2.452754] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 2.459832] db_root: cannot open: /etc/target
[ 2.465337] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[ 2.477175] tun: Universal TUN/TAP device driver, 1.6
[ 2.479377] VFIO - User Level meta-driver version: 0.3
[ 2.483731] usbcore: registered new interface driver uas
[ 2.487036] usbcore: registered new interface driver usb-storage
[ 2.494065] i2c_dev: i2c /dev entries driver
[ 2.501865] sdhci: Secure Digital Host Controller Interface driver
[ 2.503327] sdhci: Copyright(c) Pierre Ossman
[ 2.508049] Synopsys Designware Multimedia Card Interface Driver
[ 2.514167] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.521399] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.526838] meson-sm: secure-monitor enabled
[ 2.530057] hid: raw HID events driver (C) Jiri Kosina
[ 2.534538] usbcore: registered new interface driver usbhid
[ 2.539937] usbhid: USB HID core driver
[ 2.544251] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 2.553033] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.647553] NET: Registered PF_PACKET protocol family
[ 2.648253] 9pnet: Installing 9P2000 support
[ 2.651351] Key type dns_resolver registered
[ 2.665248] registered taskstats version 1
[ 2.665528] Loading compiled-in X.509 certificates
[ 2.696477] zswap: loaded using pool zstd/z3fold
[ 2.707587] Key type .fscrypt registered
[ 2.707639] Key type fscrypt-provisioning registered
[ 2.712611] Btrfs loaded, zoned=yes, fsverity=yes
[ 2.728989] reg-fixed-voltage regulator-ao_5v: Looking up vin-supply from device tree
[ 2.729024] AO_5V: supplied by DC_IN
[ 2.729033] DC_IN: could not add device link regulator.2: -ENOENT
[ 2.729097] AO_5V: 5000 mV, enabled
[ 2.729256] reg-fixed-voltage regulator-ao_5v: AO_5V supplying 5000000uV
[ 2.729452] reg-fixed-voltage regulator-vcck: Looking up vin-supply from device tree
[ 2.729473] VCCK: supplied by AO_5V
[ 2.729490] AO_5V: could not add device link regulator.3: -ENOENT
[ 2.729545] VCCK: 3300 mV, enabled
[ 2.729684] reg-fixed-voltage regulator-vcck: VCCK supplying 3300000uV
[ 2.731312] regulator-vcc5v enforce active low on GPIO handle
[ 2.731507] VCC5V: 5000 mV, disabled
[ 2.731694] reg-fixed-voltage regulator-vcc5v: Looking up vin-supply from device tree
[ 2.731712] VCC5V: supplied by AO_5V
[ 2.731754] reg-fixed-voltage regulator-vcc5v: VCC5V supplying 5000000uV
[ 2.732222] reg-fixed-voltage regulator-vddio_ao3v3: Looking up vin-supply from device tree
[ 2.732244] VDDIO_AO3V3: supplied by AO_5V
[ 2.732252] AO_5V: could not add device link regulator.5: -ENOENT
[ 2.732324] VDDIO_AO3V3: 3300 mV, enabled
[ 2.732462] reg-fixed-voltage regulator-vddio_ao3v3: VDDIO_AO3V3 supplying 3300000uV
[ 2.733127] reg-fixed-voltage regulator-vddio_ao18: Looking up vin-supply from device tree
[ 2.733152] VDDIO_AO18: supplied by VDDIO_AO3V3
[ 2.733161] VDDIO_AO3V3: could not add device link regulator.6: -ENOENT
[ 2.733220] VDDIO_AO18: 1800 mV, enabled
[ 2.733355] reg-fixed-voltage regulator-vddio_ao18: VDDIO_AO18 supplying 1800000uV
[ 2.734012] reg-fixed-voltage regulator-vcc_1v8: Looking up vin-supply from device tree
[ 2.734036] VCC 1V8: supplied by VDDIO_AO3V3
[ 2.734045] VDDIO_AO3V3: could not add device link regulator.7: -ENOENT
[ 2.734115] VCC 1V8: 1800 mV, enabled
[ 2.734257] reg-fixed-voltage regulator-vcc_1v8: VCC 1V8 supplying 1800000uV
[ 2.735000] phy phy-d0078000.phy.0: Looking up phy-supply from device tree
[ 2.735016] VDDIO_CARD: 1800 <--> 3300 mV at 3300 mV, enabled
[ 2.735031] VCC5V: could not add device link phy-d0078000.phy.0: -ENOENT
[ 2.735455] phy phy-d0078020.phy.1: Looking up phy-supply from device tree
[ 2.735478] VCC5V: could not add device link phy-d0078020.phy.1: -ENOENT
[ 2.737074] meson-drm d0100000.vpu: Queued 1 outputs on vpu
[ 2.739153] meson-drm d0100000.vpu: CVBS Output connector not available
[ 2.743633] meson-dw-hdmi c883a000.hdmi-tx: Looking up hdmi-supply from device tree
[ 2.770403] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.776065] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.782869] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 2.790868] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 3.374784] Console: switching to colour frame buffer device 240x67
[ 3.407208] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.417288] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 3.420925] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 3.427094] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 3.434116] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.440090] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 3.445164] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 3.452599] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 3.460017] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 3.465164] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 3.472172] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 3.478642] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 3.484413] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 3.490186] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.500675] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply from device tree
[ 3.500705] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply property in node /soc/usb@d0078080 failed
[ 3.500957] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 3.503380] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 4.031690] dwc2 c9100000.usb: Looking up vusb_d-supply from device tree
[ 4.031715] dwc2 c9100000.usb: Looking up vusb_d-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 4.031750] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 4.033481] dwc2 c9100000.usb: Looking up vusb_a-supply from device tree
[ 4.033491] dwc2 c9100000.usb: Looking up vusb_a-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 4.033509] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 4.040663] dwc2 c9100000.usb: Looking up vbus-supply from device tree
[ 4.040675] dwc2 c9100000.usb: Looking up vbus-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 4.041135] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 4.049779] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.052877] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 4.060560] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports
[ 4.066366] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000008002000010
[ 4.075750] xhci-hcd xhci-hcd.1.auto: irq 26, io mem 0xc9000000
[ 4.081830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 4.089775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.096910] usb usb1: Product: xHCI Host Controller
[ 4.101701] usb usb1: Manufacturer: Linux 6.6.30-gentoo xhci-hcd
[ 4.107664] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 4.113378] hub 1-0:1.0: USB hub found
[ 4.116247] hub 1-0:1.0: 2 ports detected
[ 4.124517] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 4.124674] meson-gx-mmc d0074000.mmc: Looking up vmmc-supply from device tree
[ 4.126675] meson-gx-mmc d0074000.mmc: Looking up vqmmc-supply from device tree
[ 4.126841] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.145192] meson-saradc c1108680.adc: Looking up vref-supply from device tree
[ 4.147579] VCC_CARD: 3300 mV, disabled
[ 4.147767] reg-fixed-voltage regulator-vcc_card: Looking up vin-supply from device tree
[ 4.147787] VCC_CARD: supplied by VDDIO_AO3V3
[ 4.147822] reg-fixed-voltage regulator-vcc_card: VCC_CARD supplying 3300000uV
[ 4.175909] clk: Disabling unused clocks
[ 4.176178] ALSA device list:
[ 4.176743] meson-gx-mmc d0072000.mmc: Looking up vmmc-supply from device tree
[ 4.177142] No soundcards found.
[ 4.177342] meson-gx-mmc d0072000.mmc: Looking up vqmmc-supply from device tree
[ 4.180769] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.219661] Freeing unused kernel memory: 8768K
[ 4.251618] Checked W+X mappings: passed, no W+X pages found
[ 4.251752] Run /init as init process
[ 4.255380] with arguments:
[ 4.255386] /init
[ 4.255391] with environment:
[ 4.255395] HOME=/
[ 4.255399] TERM=linux
[ 4.255404] BOOT_IMAGE=/boot/vmlinuz-6.6.30-gentoo
[ 4.276650] systemd[1]: System time before build time, advancing clock.
[ 4.303573] NET: Registered PF_INET6 protocol family
[ 4.328009] Segment Routing with IPv6
[ 4.332467] RPL Segment Routing with IPv6
[ 4.336720] In-situ OAM (IOAM) with IPv6
[ 4.353168] systemd[1]: systemd 255 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 +LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 4.374359] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.379050] systemd[1]: Detected architecture arm64.
[ 4.408925] systemd[1]: Running in initrd.
[ 4.426934] systemd[1]: No hostname configured, using default hostname.
[ 4.431803] systemd[1]: Hostname set to <localhost>.
[ 4.436656] systemd[1]: Initializing machine ID from random generator.
[ 4.539026] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 4.545743] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.552793] usb 1-1: Product: USB2.0 Hub
[ 4.583093] mmc1: new ultra high speed SDR104 SDXC card at address aaaa
[ 4.589756] mmcblk1: mmc1:aaaa SD256 238 GiB
[ 4.595663] hub 1-1:1.0: USB hub found
[ 4.600205] hub 1-1:1.0: 4 ports detected
[ 4.629473] mmcblk1: p1 p2 p3 p4
[ 4.749867] systemd[1]: Queued start job for default target Initrd Default Target.
[ 4.796977] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.818651] systemd[1]: Expecting device /dev/mmcblk1p4...
[ 4.834680] systemd[1]: Reached target Initrd /usr File System.
[ 4.854742] systemd[1]: Reached target Path Units.
[ 4.870696] systemd[1]: Reached target Slice Units.
[ 4.886814] systemd[1]: Reached target Swaps.
[ 4.902765] systemd[1]: Reached target Timer Units.
[ 4.920073] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.944062] systemd[1]: Listening on Journal Socket.
[ 4.950478] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[ 4.972231] systemd[1]: Listening on udev Control Socket.
[ 4.995822] systemd[1]: Listening on udev Kernel Socket.
[ 5.018803] systemd[1]: Reached target Socket Units.
[ 5.058722] usb 1-1.1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
[ 5.065304] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.072572] usb 1-1.1: Product: USB2.0 HUB
[ 5.079162] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.106399] hub 1-1.1:1.0: USB hub found
[ 5.115806] hub 1-1.1:1.0: 4 ports detected
[ 5.155028] systemd[1]: Starting Journal Service...
[ 5.171160] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
[ 5.182555] systemd[1]: Starting Apply Kernel Variables...
[ 5.202757] systemd[1]: Starting Virtual Console Setup...
[ 5.218944] systemd-journald[207]: Collecting audit messages is disabled.
[ 5.237870] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.256125] systemd[1]: Finished Apply Kernel Variables.
[ 5.283093] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 5.313146] systemd[1]: Finished Virtual Console Setup.
[ 5.335300] systemd[1]: Started Journal Service.
[ 5.410425] usb 1-1.1.4: new full-speed USB device number 4 using xhci-hcd
[ 5.518202] usb 1-1.1.4: New USB device found, idVendor=0b95, idProduct=6804, bcdDevice= 0.12
[ 5.525080] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.532045] usb 1-1.1.4: Product: AX68004
[ 5.536501] usb 1-1.1.4: Manufacturer: ASIX Electronics
[ 5.541624] usb 1-1.1.4: SerialNumber: 00000001
[ 5.586261] hub 1-1.1.4:1.0: USB hub found
[ 5.590776] hub 1-1.1.4:1.0: 7 ports detected
[ 5.886384] usb 1-1.1.4.1: new full-speed USB device number 5 using xhci-hcd
[ 5.994117] usb 1-1.1.4.1: New USB device found, idVendor=062a, idProduct=4c01, bcdDevice= 1.25
[ 6.000627] usb 1-1.1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.008197] usb 1-1.1.4.1: Product: 2.4G INPUT DEVICE
[ 6.013136] usb 1-1.1.4.1: Manufacturer: MOSART Semi.
[ 6.100974] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.0/0003:062A:4C01.0001/input/input0
[ 6.175240] hid-generic 0003:062A:4C01.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G INPUT DEVICE] on usb-xhci-hcd.1.auto-1.1.4.1/input0
[ 6.192506] input: MOSART Semi. 2.4G INPUT DEVICE Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0002/input/input1
[ 6.209216] input: MOSART Semi. 2.4G INPUT DEVICE Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0002/input/input2
[ 6.286778] input: MOSART Semi. 2.4G INPUT DEVICE System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0002/input/input3
[ 6.304504] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0002/input/input4
[ 6.323413] hid-generic 0003:062A:4C01.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G INPUT DEVICE] on usb-xhci-hcd.1.auto-1.1.4.1/input1
[ 6.896485] meson-vrtc c81000a8.rtc: registered as rtc0
[ 6.900663] meson-vrtc c81000a8.rtc: setting system clock to 2024-05-27T13:39:52 UTC (1716817192)
[ 6.939058] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 6.945470] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 6.962999] usbcore: registered new device driver onboard-usb-hub
[ 6.979931] usb 1-1.1: USB disconnect, device number 3
[ 6.984101] usb 1-1.1.4: USB disconnect, device number 4
[ 6.988789] usb 1-1.1.4.1: USB disconnect, device number 5
[ 7.474271] hub 1-1:1.0: USB hub found
[ 7.479912] hub 1-1:1.0: 4 ports detected
[ 7.601086] EXT4-fs (mmcblk1p4): mounted filesystem 48f81d30-2c70-4553-8e1b-cabc2ab59ae8 ro with ordered data mode. Quota mode: none.
[ 7.634441] hub 1-1:1.0: USB hub found
[ 7.643205] hub 1-1:1.0: 4 ports detected
[ 7.882399] usb 1-1.1: new high-speed USB device number 6 using xhci-hcd
[ 7.986818] usb 1-1.1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00
[ 8.000461] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.013033] usb 1-1.1: Product: USB2.0 HUB
[ 8.083445] hub 1-1.1:1.0: USB hub found
[ 8.094703] hub 1-1.1:1.0: 4 ports detected
[ 8.410419] usb 1-1.1.4: new full-speed USB device number 7 using xhci-hcd
[ 8.522556] usb 1-1.1.4: New USB device found, idVendor=0b95, idProduct=6804, bcdDevice= 0.12
[ 8.533963] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.541324] usb 1-1.1.4: Product: AX68004
[ 8.553562] usb 1-1.1.4: Manufacturer: ASIX Electronics
[ 8.561912] usb 1-1.1.4: SerialNumber: 00000001
[ 8.626195] hub 1-1.1.4:1.0: USB hub found
[ 8.631343] hub 1-1.1.4:1.0: 7 ports detected
[ 8.824654] systemd-journald[207]: Received SIGTERM from PID 1 (systemd).
[ 8.926402] usb 1-1.1.4.1: new full-speed USB device number 8 using xhci-hcd
[ 9.034176] usb 1-1.1.4.1: New USB device found, idVendor=062a, idProduct=4c01, bcdDevice= 1.25
[ 9.045201] usb 1-1.1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.051200] usb 1-1.1.4.1: Product: 2.4G INPUT DEVICE
[ 9.063243] usb 1-1.1.4.1: Manufacturer: MOSART Semi.
[ 9.141749] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.0/0003:062A:4C01.0003/input/input5
[ 9.216088] hid-generic 0003:062A:4C01.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G INPUT DEVICE] on usb-xhci-hcd.1.auto-1.1.4.1/input0
[ 9.243318] input: MOSART Semi. 2.4G INPUT DEVICE Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0004/input/input6
[ 9.267807] input: MOSART Semi. 2.4G INPUT DEVICE Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0004/input/input7
[ 9.346947] input: MOSART Semi. 2.4G INPUT DEVICE System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0004/input/input8
[ 9.367092] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/0003:062A:4C01.0004/input/input9
[ 9.384509] hid-generic 0003:062A:4C01.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G INPUT DEVICE] on usb-xhci-hcd.1.auto-1.1.4.1/input1
[ 9.418014] systemd[1]: systemd 255 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 +LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 9.460525] systemd[1]: Detected architecture arm64.
[ 9.491647] systemd[1]: Hostname set to <swpotato>.
[ 11.061457] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 11.068825] systemd[1]: Stopped Switch Root.
[ 11.090299] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 11.101122] systemd[1]: Created slice Slice /system/getty.
[ 11.120725] systemd[1]: Created slice Slice /system/serial-getty.
[ 11.140519] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 11.160277] systemd[1]: Created slice User and Session Slice.
[ 11.183064] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.207170] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.236237] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.270751] systemd[1]: Expecting device /dev/disk/by-uuid/809c356b-9b0d-41d1-ae41-94ee07170e62...
[ 11.298714] systemd[1]: Expecting device /dev/disk/by-uuid/9ED2-AE2C...
[ 11.322700] systemd[1]: Expecting device /dev/ttyAML0...
[ 11.346929] systemd[1]: Stopped target Switch Root.
[ 11.370824] systemd[1]: Stopped target Initrd File Systems.
[ 11.398780] systemd[1]: Stopped target Initrd Root File System.
[ 11.426985] systemd[1]: Reached target Path Units.
[ 11.450867] systemd[1]: Reached target Remote File Systems.
[ 11.478823] systemd[1]: Reached target Slice Units.
[ 11.502975] systemd[1]: Reached target System Time Set.
[ 11.545650] systemd[1]: Listening on Process Core Dump Socket.
[ 11.572881] systemd[1]: Listening on Journal Audit Socket.
[ 11.600463] systemd[1]: Listening on Network Service Netlink Socket.
[ 11.635130] systemd[1]: Listening on udev Control Socket.
[ 11.655884] systemd[1]: Listening on udev Kernel Socket.
[ 11.680138] systemd[1]: Listening on User Database Manager Socket.
[ 11.750699] systemd[1]: Mounting Huge Pages File System...
[ 11.772053] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.794928] systemd[1]: Mounting Kernel Debug File System...
[ 11.818484] systemd[1]: Mounting Kernel Trace File System...
[ 11.839758] systemd[1]: Starting Create List of Static Device Nodes...
[ 11.863758] systemd[1]: Starting Load Kernel Module configfs...
[ 11.883153] systemd[1]: Starting Load Kernel Module dm_mod...
[ 11.893016] systemd[1]: Starting Load Kernel Module drm...
[ 11.920070] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 11.943536] systemd[1]: Starting Load Kernel Module fuse...
[ 11.967698] systemd[1]: Starting Load Kernel Module loop...
[ 11.994825] systemd[1]: Starting Journal Service...
[ 12.048210] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
[ 12.061489] systemd[1]: Starting Generate network units from Kernel command line...
[ 12.069101] device-mapper: uevent: version 1.0.3
[ 12.077147] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 12.127585] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.133706] fuse: init (API version 7.39)
[ 12.144304] systemd-journald[372]: Collecting audit messages is enabled.
[ 12.166882] systemd[1]: Starting Apply Kernel Variables...
[ 12.187360] systemd[1]: Starting Coldplug All udev Devices...
[ 12.197288] systemd[1]: Started Journal Service.
[ 12.211550] EXT4-fs (mmcblk1p4): re-mounted 48f81d30-2c70-4553-8e1b-cabc2ab59ae8 r/w. Quota mode: none.
[ 12.621517] systemd-journald[372]: Received client request to flush runtime journal.
[ 12.854293] systemd-journald[372]: /var/log/journal/c970ee46503e4f88b2338ca27d45b6a8/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
[ 12.874624] systemd-journald[372]: Rotating system journal.
[ 14.078158] meson8b-dwmac c9410000.ethernet end0: renamed from eth0
[ 14.535551] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.543162] mousedev: PS/2 mouse device common for all mice
[ 14.566519] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.571357] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 14.579084] Loading firmware: regulatory.db
[ 14.602766] Loading firmware: regulatory.db.p7s
[ 15.159200] mc: Linux media interface: v0.10
[ 15.184151] Registered IR keymap rc-empty
[ 15.190230] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
[ 15.198150] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 15.207155] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input10
[ 15.215584] meson-ir c8100580.ir: receiver initialized
[ 15.335318] Adding 8388604k swap on /dev/mmcblk1p2. Priority:-2 extents:1 across:8388604k SS
[ 15.441087] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 15.441113] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 15.444650] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 15.449443] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 15.455159] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 15.462237] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 15.471910] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 15.483267] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 15.494709] lima d00c0000.gpu: bus rate = 166666667
[ 15.501592] lima d00c0000.gpu: mod rate = 24000000
[ 15.509315] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 15.509337] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 15.509373] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 15.516445] videodev: Linux video capture interface: v2.00
[ 15.521545] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
[ 15.701960] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.593569] meson8b-dwmac c9410000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 17.665609] meson8b-dwmac c9410000.ethernet end0: PHY [mdio_mux-0.1:08] driver [Meson GXL Internal PHY] (irq=29)
[ 17.686223] meson8b-dwmac c9410000.ethernet end0: No Safety Features support found
[ 17.692096] meson8b-dwmac c9410000.ethernet end0: PTP not supported by HW
[ 17.699169] meson8b-dwmac c9410000.ethernet end0: configuring for phy/rmii link mode
[ 19.180268] meson8b-dwmac c9410000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 22.463330] systemd-journald[372]: /var/log/journal/c970ee46503e4f88b2338ca27d45b6a8/user-1000.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
|
Nothing jumping out at me in a dmesg output (The regulator warning is normal and expected on this amlogic board)
Last edited by JumboAg on Tue Jun 25, 2024 3:53 pm; edited 1 time in total |
|
| Back to top |
|
 |
JumboAg
Apprentice
Joined: 03 Mar 2007
Posts: 205
Location: Dallas, TX
|
| Posted: Tue Jun 25, 2024 3:52 pm Post subject: |
|
|
I found the config code I needed. For anyone else that needs the xorg.conf snippet down the road:
Section "OutputClass"
Identifier "Amlogic"
MatchDriver "meson"
Driver "modesetting"
Option "PrimaryGPU" "true"
EndSection |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on ARM
