| View previous topic :: View next topic |
| Author |
Message |
mv
Watchman
Joined: 20 Apr 2005
Posts: 6780
|
 Posted: Sat Jun 29, 2024 9:03 pm Post subject: Bluetooth headphones and pipewire [solved] |
 |
|
I know that there is a similar thread, but my problem is a bit different:
As in the mentioned thread, I also have sometimes the problem that I cannot connect, but for some unknown reason it succeeds after a few retries, so I guess that this is unrelated.
However, pipewire seems to be completely unaware of the bluetooth device: The output of e.g. mplayer -ao pulse goes straight to my connected loudspeaker, and wpctl status does not show anything related to bluetooth. Also restarting wireplumber does not display anything related to bluetooth.
I have also bluez-alsa installed, and if I set the corresponding asound.conf, the output goes to the bluetooth headphones, so they are indeed working and properly paired/connected and can receive sound.
Versions and active USE-flags:
wireplumber: 0.5.3(systemd -elogind -system-service)
pipewire 1.0.7(X bluetooth dbus sound-server ssl systemd)
Note that I have USE=systemd enabled and also systemd (hence udev) installed, but I boot with openrc.
This means that logind is not really running, but so far this was never a problem, because I am using wlroots w/ seatd-0.8.0(server -elogind -systemd).
Last edited by mv on Sun Jun 30, 2024 8:04 am; edited 2 times in total |
|
| Back to top |
|
 |
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6145
Location: Dallas area
|
| Posted: Sat Jun 29, 2024 9:26 pm Post subject: |
|
|
Are you just using whatever default config files for pipewire/wireplumber there are.
Or do you have config files in .config/pipewire and/or .config/wireplumber?
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
ormorph
n00b
Joined: 18 Jun 2024
Posts: 27
|
| Posted: Sun Jun 30, 2024 4:09 am Post subject: |
|
|
| Code: | $ bluetoothctl
[bluetooth]# scan on
#out
...
[bluetooth]# [CHG] Device xx:xx:xx:xx:xx:xx
...
# run
[bluetooth]# connect xx:xx:xx:xx:xx:xx |
Is the connection working? If not, what is the output after executing the command: connect xx:xx:xx:xx:xx:xx |
|
| Back to top |
|
|
mv
Watchman
Joined: 20 Apr 2005
Posts: 6780
|
| Posted: Sun Jun 30, 2024 6:01 am Post subject: |
|
|
| Anon-E-moose wrote: | Are you just using whatever default config files for pipewire/wireplumber there are.
Or do you have config files in .config/pipewire and/or .config/wireplumber? |
I add the files
| /etc/pulseaudio/client.pulse wrote: | | autospawn = no |
and added or modified
| /etc/pipewire/pipewire-pulse.conf.d/pipewire-pulse.conf wrote: | pulse.properties = {
server.address = [
"unix:native"
"tcp:127.0.0.1:4713"
]
vm.overrides = {
pulse.min.quantum = 1024/48000
}
} |
I also added for bluealsa the /etc/dbus-1/system.d/bluealsa.conf and etc/alsa/conf.d/20-bluealsa.conf from https://wiki.gentoo.org/wiki/Bluetooth_headset (with MAC addresses adapted; this is perhaps a bit too long to repost here), and
| /etc/asound.conf wrote: | defaults.bluealsa {
interface "hci0" # host Bluetooth adapter
device "41:42:FF:B3:D8:93" # Bluetooth headset MAC address
profile "a2dp"
} |
(which takes only effect if I use the alsa device bluealsa; changing the alsa output to bluealsa in asound.conf unsurprisingly has only effect if e.g. mplayer outputs to alsa).
There were by default the symlink /etc/alsa/c onf.d/dca -> ../../../usr/share/alsa/pcm/dca.conf and
| /etc/wireplumber/wireplumber.conf.d/entoo-sound-server-enable-audio-bluetooth.conf wrote: | wireplumber.profiles = {
main = {
hardware.audio = required
hardware.bluetooth = required
}
} |
|
|
| Back to top |
|
|
mv
Watchman
Joined: 20 Apr 2005
Posts: 6780
|
| Posted: Sun Jun 30, 2024 6:11 am Post subject: |
|
|
| ormorph wrote: | | Code: | $ bluetoothctl
[bluetooth]# scan on
#out
...
[bluetooth]# [CHG] Device xx:xx:xx:xx:xx:xx
...
# run
[bluetooth]# connect xx:xx:xx:xx:xx:xx |
Is the connection working? If not, what is the output after executing the command: connect xx:xx:xx:xx:xx:xx |
As mentioned, sometimes it is as in the other thread:
| Quote: | Attempting to connect to xx:xx:xx:xx:xx:xx
[bluetooth]# Failed to connect: org.bluez.Error.Failed br-connection-profile-unavailable |
However, eventually (either after sufficiently many retries or sufficiently many attempts), I get
| Quote: | hci0 xx:xx:xx:xx:xx:xx type BR/EDR connected eir_len 5
[CHG] Device xx:xx:xx:xx:xx:xx Connected: yes
[B8]# [NEW] Endpoint /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/sep1
[B8]# [NEW] Endpoint /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/sep2
[B8]# [NEW] Transport /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/sep1/fd2
[B8]# Connection successful
[B8]# [CHG] Transport /org/bluez/hci0/dev_xx_xx_xx_xx_xx_xx/sep1/fd2 Volume: 0x0058 (88)
[B8]# [CHG] Device xx:xx:xx:xx:xx:xx ServicesResolved: yes |
B8 is the bluetooth name of my headphone (when I pair it with my smartphone).
Edit: Unrelated, but maybe somebody knows: I have to enable USE="extra-tools deprecated" for bluez to have bluetoothctl and hciconfig, and the descriptions of these USE-flags contain that the tools are intentionally not installed and should not be used. Do I have to be afraid that they go away? I found no alternatives. For instance, blueman showed only an error that a headphone icon is missing instead of presumably showing something that I could click for pairing, and the gnome tool is only a library which I cannot use as I do not use gnome. Similarly, the dependencies of the kde tool are horrible if you are not a kde user, anyway. |
|
| Back to top |
|
|
ormorph
n00b
Joined: 18 Jun 2024
Posts: 27
|
| Posted: Sun Jun 30, 2024 6:36 am Post subject: |
|
|
| mv wrote: |
| Quote: | Attempting to connect to xx:xx:xx:xx:xx:xx
[bluetooth]# Failed to connect: org.bluez.Error.Failed br-connection-profile-unavailable |
However, eventually (either after sufficiently many retries or sufficiently many attempts), I get |
It may be necessary to first remove the device and then reconnect it. You can also see the latest message here, тhis also solves the problem.
You can also add a line to the /etc/bluetooth/main.conf file:
| Code: | | ControllerMode = bredr |
Often, if I connected previously on a different OS, then I have to delete the device after that and connect again.
| Code: | [bluetooth]# devices
Device xx:xx:xx:xx:xx:xx name
[bluetooth]# remove xx:xx:xx:xx:xx:xx |
Perhaps one of these options will help you. |
|
| Back to top |
|
|
mv
Watchman
Joined: 20 Apr 2005
Posts: 6780
|
| Posted: Sun Jun 30, 2024 7:55 am Post subject: |
|
|
| Quote: | | ControllerMode = bredr |
This did not really improve the situation, perhaps it made it even worse. (There were some messages that connection with bredr failed.) Perhaps I had no success at all with this option. (I tried so much that it is hard to say.)
| ormorph wrote: | | You can also see the latest message here, тhis also solves the problem. |
That did the trick! Adding the line monitor.bluez.seat-monitoring = disabled to the main section of /etc/wireplumber/wireplumber.conf.d/gentoo-sound-server-enable-audio-bluetooth.conf and restarting pipewire+wireplumber helped.
I just did not realize this first, because I almost did not hear anything: Under pipewire, the volume is much lower, and I do not know a way to control the volume (e.g. modifying with pavucontrol has no effect). With bluealsa, there exists the option --initialvolume=[0-100]. Does something similar exist for wireplumber?
I will open a separate thread for the volume. |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6145
Location: Dallas area
|
| Posted: Sun Jun 30, 2024 9:51 am Post subject: |
|
|
I had problems with bluetooth connecting occasionally with the dongle I was using (tp-link ub500) where I might have to disconnect/connect
a few times till it decided to connect. Because of that I did start doing things like making the connect mode only bredr, I don't really have
any true BLE devices so no harm on my end.
But I bought a new minipc with onboard bluetooth, and it works like a charm, never a problem with connection.
So sometimes it's the bluetooth controller that might be the problem.
I had forgotten about the monitor settings, I turn those off.
| Code: | monitor.alsa.reserve-device = disabled
monitor.bluez.seat-monitoring = disabled |
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
mv
Watchman
Joined: 20 Apr 2005
Posts: 6780
|
| Posted: Sun Jun 30, 2024 12:09 pm Post subject: |
|
|
| Anon-E-moose wrote: | | So sometimes it's the bluetooth controller that might be the problem. |
This might very well be. I paid << 2 bucks for this no-name dongle, but once it is connected it seems to work pretty well. |
|
| Back to top |
|
|
|
Multimedia
