| View previous topic :: View next topic |
| Author |
Message |
artbody
Guru
Joined: 15 Sep 2006
Posts: 494
Location: LB
|
 Posted: Fri Jul 19, 2024 8:34 am Post subject: [solved]xHCI host dead NO Mouse Keyboard after a few minutes |
 |
|
Strange error
after booting the MiniPC AMD Rayson 7 it works all well.
after a few minutes NO more mouse Keyboard and so on. Reconnect doesn't help
all USB activity is dead - no power on the USB devices
dmesg
| Code: | [ 15.909933] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[ 16.067383] usb 1-4: New USB device found, idVendor=056e, idProduct=00fb, bcdDevice= 1.10
[ 16.067403] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 16.067410] usb 1-4: Product: ELECOM TrackBall Mouse
[ 16.067416] usb 1-4: Manufacturer: ELECOM
[ 16.131293] elecom 0003:056E:00FB.0002: Fixing up Elecom mouse button count
[ 16.131447] input: ELECOM ELECOM TrackBall Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.0/0003:056E:00FB.0002/input/input10
[ 16.187295] elecom 0003:056E:00FB.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [ELECOM ELECOM TrackBall Mouse] on usb-0000:05:00.3-4/input0
[ 19.106528] usb 1-3: new low-speed USB device number 3 using xhci_hcd
[ 19.264460] usb 1-3: New USB device found, idVendor=258a, idProduct=00a0, bcdDevice= 1.06
[ 19.264479] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 19.264487] usb 1-3: Product: USB KEYBOARD
[ 19.264493] usb 1-3: Manufacturer: SINO WEALTH
[ 19.292981] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-3/1-3:1.0/0003:258A:00A0.0003/input/input11
[ 19.350142] hid-generic 0003:258A:00A0.0003: input,hidraw2: USB HID v1.11 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-3/input0
[ 19.357916] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-3/1-3:1.1/0003:258A:00A0.0004/input/input12
[ 19.413405] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-3/1-3:1.1/0003:258A:00A0.0004/input/input13
[ 19.413656] hid-generic 0003:258A:00A0.0004: input,hiddev97,hidraw3: USB HID v1.11 Device [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-3/input1
[ 43.222909] systemd-journald[962]: Time jumped backwards, rotating.
[ 1567.150941] usb 1-4: USB disconnect, device number 2
[ 1572.279858] xhci_hcd 0000:05:00.3: xHCI host not responding to stop endpoint command
[ 1572.293336] xhci_hcd 0000:05:00.3: xHCI host controller not responding, assume dead
[ 1572.293356] xhci_hcd 0000:05:00.3: HC died; cleaning up
[ 1572.370603] usb 1-3: USB disconnect, device number 3
|
| Code: | lspci -v | grep USB
05:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 (prog-if 30 [XHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
05:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 (prog-if 30 [XHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 |
| Code: | lsmod |grep usb
btusb 73728 0
btrtl 32768 1 btusb
btintel 57344 1 btusb
btbcm 24576 1 btusb
bluetooth 1073152 5 btrtl,btintel,btbcm,btusb
snd_usb_audio 413696 3
snd_usbmidi_lib 49152 1 snd_usb_audio
snd_rawmidi 53248 1 snd_usbmidi_lib
mc 86016 1 snd_usb_audio
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 184320 11 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_compress,snd_soc_core,snd_hda_core,snd_acp3x_pdm_dma,snd_pcm_dmaengine
snd 147456 35 snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
|
| Code: | lshw |grep driver=
configuration: driver=pcieport
configuration: driver=nvme latency=0 nqn=nqn.2014-08.com.maxio:nvme:1202:M.2:NKS108Q002752P111D state=live
configuration: driver=pcieport
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=6.6.37-gentoo-x86_64 duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.63.119 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
configuration: driver=pcieport
configuration: driver=pcieport
configuration: autonegotiation=on broadcast=yes driver=igc driverversion=6.6.37-gentoo-x86_64 firmware=2017:888d latency=0 link=no multicast=yes port=twisted pair
configuration: driver=pcieport
configuration: depth=32 driver=amdgpu latency=0 resolution=2560,1440
configuration: driver=snd_hda_intel latency=0
configuration: driver=ccp latency=0
configuration: driver=xhci_hcd latency=0
configuration: driver=hub slots=4 speed=480Mbit/s
configuration: driver=hub slots=2 speed=10000Mbit/s
configuration: driver=xhci_hcd latency=0
configuration: driver=hub slots=4 speed=480Mbit/s
configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
configuration: driver=btusb maxpower=500mA speed=12Mbit/s
configuration: driver=hub slots=2 speed=10000Mbit/s
configuration: driver=snd_rn_pci_acp3x latency=0
configuration: driver=snd_hda_intel latency=0
configuration: driver=pcieport
configuration: driver=ahci latency=0
configuration: driver=ahci latency=0
configuration: driver=piix4_smbus latency=0
configuration: driver=system
configuration: driver=rtc_cmos
configuration: driver=system
configuration: driver=serial
configuration: driver=k10temp
|
output of journalctl
after loosing mouse, keyboard connection
| Code: | Jul 19 11:33:16 artbodybox2 kernel: usb 1-2: USB disconnect, device number 2
Jul 19 11:33:22 artbodybox2 kernel: xhci_hcd 0000:05:00.3: xHCI host not responding to stop endpoint command
Jul 19 11:33:22 artbodybox2 kernel: xhci_hcd 0000:05:00.3: xHCI host controller not responding, assume dead
Jul 19 11:33:22 artbodybox2 kernel: xhci_hcd 0000:05:00.3: HC died; cleaning up
Jul 19 11:33:22 artbodybox2 kernel: usb 1-3: USB disconnect, device number 3
Jul 19 11:33:22 artbodybox2 acpid[1250]: input device has been disconnected, fd 9
Jul 19 11:33:22 artbodybox2 acpid[1250]: input device has been disconnected, fd 10
Jul 19 11:33:22 artbodybox2 acpid[1250]: input device has been disconnected, fd 11
Jul 19 11:33:22 artbodybox2 acpid[1250]: input device has been disconnected, fd 13
|
Strange POINT
i dis and reconnect the Mouse NOTHING
I connect a second mouse
| Code: | [ 4058.879658] usb 3-2: new full-speed USB device number 4 using xhci_hcd
[ 4059.035206] usb 3-2: New USB device found, idVendor=062a, idProduct=7269, bcdDevice= 2.07
[ 4059.035213] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4059.035217] usb 3-2: Product: Full-Speed Mouse
[ 4059.035221] usb 3-2: Manufacturer: Full-Speed Mouse
[ 4059.043392] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-2/3-2:1.0/0003:062A:7269.0005/input/input14
[ 4059.043597] hid-generic 0003:062A:7269.0005: input,hidraw0: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:05:00.4-2/input0 |
but the keyboard is still dead
has anybody a idea to solve this problem
_________________
Never give up
WM : E16 the true enlightenment
achim
Last edited by artbody on Wed Jul 24, 2024 1:54 pm; edited 1 time in total |
|
| Back to top |
|
 |
artbody
Guru
Joined: 15 Sep 2006
Posts: 494
Location: LB
|
| Posted: Fri Jul 19, 2024 9:00 pm Post subject: |
|
|
So my next step was now to set all ports in the BIOS to default ENABLED
every few minutes my keybord is now switching OFF and ON
so here is the dmesg:
| Code: | [ 1413.040312] usb usb1-port4: disabled by hub (EMI?), re-enabling...
[ 1413.040322] usb 1-4: USB disconnect, device number 3
[ 1420.991518] usb 1-4: new low-speed USB device number 4 using xhci_hcd
[ 1422.071501] usb 1-4: New USB device found, idVendor=258a, idProduct=00a0, bcdDevice= 1.06
[ 1422.071509] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1422.071512] usb 1-4: Product: USB KEYBOARD
[ 1422.071515] usb 1-4: Manufacturer: SINO WEALTH
[ 1423.045777] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.0/0003:258A:00A0.0005/input/input14
[ 1424.040528] hid-generic 0003:258A:00A0.0005: input,hidraw2: USB HID v1.11 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input0
[ 1424.047819] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.0006/input/input15
[ 1425.037145] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.0006/input/input16
[ 1425.037428] hid-generic 0003:258A:00A0.0006: input,hiddev0,hidraw3: USB HID v1.11 Device [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input1
[ 1548.040306] usb usb1-port4: disabled by hub (EMI?), re-enabling...
[ 1548.040324] usb 1-4: USB disconnect, device number 4
[ 1555.137647] usb 1-4: new low-speed USB device number 5 using xhci_hcd
[ 1557.075580] usb 1-4: New USB device found, idVendor=258a, idProduct=00a0, bcdDevice= 1.06
[ 1557.075588] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1557.075591] usb 1-4: Product: USB KEYBOARD
[ 1557.075594] usb 1-4: Manufacturer: SINO WEALTH
[ 1558.044981] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.0/0003:258A:00A0.0007/input/input17
[ 1559.040582] hid-generic 0003:258A:00A0.0007: input,hidraw2: USB HID v1.11 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input0
[ 1559.048000] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.0008/input/input18
[ 1560.037143] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.0008/input/input19
[ 1560.037438] hid-generic 0003:258A:00A0.0008: input,hiddev0,hidraw3: USB HID v1.11 Device [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input1
[ 1616.036969] usb usb1-port4: disabled by hub (EMI?), re-enabling...
[ 1616.036979] usb 1-4: USB disconnect, device number 5
[ 1623.926624] usb 1-4: new low-speed USB device number 6 using xhci_hcd
[ 1626.075331] usb 1-4: New USB device found, idVendor=258a, idProduct=00a0, bcdDevice= 1.06
[ 1626.075339] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1626.075342] usb 1-4: Product: USB KEYBOARD
[ 1626.075345] usb 1-4: Manufacturer: SINO WEALTH
[ 1627.041631] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.0/0003:258A:00A0.0009/input/input20
[ 1628.040582] hid-generic 0003:258A:00A0.0009: input,hidraw2: USB HID v1.11 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input0
[ 1628.047659] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.000A/input/input21
[ 1629.037118] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4/1-4:1.1/0003:258A:00A0.000A/input/input22
[ 1629.037381] hid-generic 0003:258A:00A0.000A: input,hiddev0,hidraw3: USB HID v1.11 Device [SINO WEALTH USB KEYBOARD] on usb-0000:05:00.3-4/input1 |
_________________
Never give up
WM : E16 the true enlightenment
achim |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1712
Location: Germany
|
|
| Back to top |
|
|
artbody
Guru
Joined: 15 Sep 2006
Posts: 494
Location: LB
|
| Posted: Mon Jul 22, 2024 2:16 pm Post subject: |
|
|
i have 2 of this MiniPC
ACEMAGICIAN AM06 Pro Mini PC, AMD Ryzen 7 5700U (8C/16T, bis zu 4.3Ghz),16GB DDR4 512GB NVME SSD Mini Computer mit Type-C |Dual LAN| WiFi6 |BT5.2
most Times i running them over TigerVNC as Synthesizer (VCV Rack 2 PRO)
Since i have a monitor, a few days ago, i connected one of these MiniPCs to a monitor, keyboard and mouse.
Today i connected the other MiniPC with the Monitor, keyboard and mouse, and there are no problems with disconnected keyboard and mouse.
i dived a little bit in these subject and realized that one runs under
sys-kernel/gentoo-sources-6.6.30 ( the older MiniPC)
and the new one runs under
sys-kernel/gentoo-sources-6.6.37
Now i switched MiniPC 2 to the older Kernel and it looks like it works well
SO i assume it's a kernel problem
_________________
Never give up
WM : E16 the true enlightenment
achim |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1712
Location: Germany
|
|
| Back to top |
|
|
artbody
Guru
Joined: 15 Sep 2006
Posts: 494
Location: LB
|
| Posted: Wed Jul 24, 2024 1:53 pm Post subject: |
|
|
Okay , spacial Thx for your advice
I think the config file was totally messed up ... 
so i copied the old config over the new one and recompiled the new Kernel -all works fine 
thx
_________________
Never give up
WM : E16 the true enlightenment
achim |
|
| Back to top |
|
|
Banana
Moderator
Joined: 21 May 2004
Posts: 1712
Location: Germany
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
