View previous topic :: View next topic |
Author |
Message |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Mon Aug 05, 2024 5:53 am Post subject: No boot entry after grub install |
|
|
I'm trying to install gentoo and no matter what I do I cannot manage to get a boot entry to show up in bios (uefi).
I'm using the livegui installation media. I have /dev/sda2 mounted at /mnt/gentoo and /dev/sda1 mounted at /mnt/gentoo/boot/efi. The type of /dev/sda1 is "EFI System" and of size 1MiB. /dev/sda2 is of type "Linux Filesystem". The filesystem on /dev/sda1 is fat32:
Code: | mkfs.fat -F 32 /dev/sda1 |
I have no other drives except for the installation media usb (/dev/sdb). After the command
Code: | grub-install --efi-directory=/boot/efi |
grub says there were no errors. I now have the file /boot/efi/EFI/gentoo/grubx64.efi. efivars are mounted at /sys/firmware/efi/efivars (rw not ro). The command
shows the output
Code: | BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0000,0003
Boot0000* gentoo HD(1,GPT,some number,0x800,0x100000)/File(\EFI\gentoo\grubx64.efi)0000424f
dp: 04 01 2a 00 some more numbers
data 00 00 42 4f
Boot0003* USB, Partition 2 PciRoot(0x0)/Pci(0x7,0x1)/Pci(0x0,0x3)/USB(7,0)/HD(2,GPT,....,0x728bfd8,0x10000)0000424f
dp: 02 01 0c 00 ....
data: 00 00 42 4f
|
But when I reboot and go into bios (uefi) it finds no boot entries at all. (Except for the usb when I plug it in again). If I boot the livegui again efibootmgr -v now shows only the usb entry.
What I have tried:
Add --removable flag to grub-install.
Change secure boot settings and a lot of other settings in bios.
Reinstall from the beginning of the handbook 2 times, including disk partitioning in case I missed something.
Install debian on the same exact configuration. This works as expected.
I have checked the partitioning of the debian install. It is the same as mine, except that the EFI System partition (/dev/sda1) is 512MiB instead of my 1MiB. The file which is booted is /boot/efi/EFI/debian/grubx64.efi. At first there were other efi files here but I removed them to try to get it to use the grubx64.efi file, it still works as expected. Now, from debian the output of efibootmgr -v is almost the same:
Code: | BootCurrent: 0002
Timeout: 1 seconds
BootOrder: 0002,0003
Boot0002* debian HD(1,GPT,<THIS NUMBER IS DIFFERENT>,0x800,0x100000)/File(\EFI\debian\grubx64.efi)0000424f
dp: ....
data ...
Boot0003* USB, Partition 2 PciRoot(0x0)/Pci(0x7,0x1)/Pci(0x0,0x3)/USB(7,0)/HD(2,GPT,....,0x728bfd8,0x10000)0000424f
dp: 02 01 0c 00 ....
data: 00 00 42 4f
|
I have installed gentoo on 5 different devices before and never had a problem like this. I cannot figure out what is going on. Any hints? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
BurningMemory n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 17 Jan 2023 Posts: 54
|
Posted: Mon Aug 05, 2024 7:10 am Post subject: |
|
|
Have you put in any m.2 drives in the machine as of recently?
If so, try to reset the cmos battery. Should work afterwards.
If it doesn't you can try to:
- remove the entry via efibootmgr and regen the config
- reinstall to /boot and not /boot/efi
- reinstall with the --target=x86_64-efi flag
I had some weird problems with it some time ago,
something along these lines usually helped.
Also, if you're using the --target flag it may complain
about something, in that case just experiment with the flags
and it should install just fine. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Mon Aug 05, 2024 7:22 am Post subject: |
|
|
No there are no m.2 drives and has never been. Only an old sata ssd. I have already tried the --target flag, this should not be necessary. I should be able to install to /boot/efi, also the debian install works this way. I will try to manually add the boot entry using efibootmgr. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Goverp Advocate
![Advocate Advocate](/images/ranks/rank-G-1-advocate.gif)
![](images/avatars/152613747847c6fd276c31a.jpg)
Joined: 07 Mar 2007 Posts: 2112
|
Posted: Mon Aug 05, 2024 8:19 am Post subject: |
|
|
spinojara,
Try running grub-install --verbose. You might see some error messages (actually, I bet you'll see a lot) as it tries different routes to achieve the install.
A thought: it might be it doesn't trust your EFI partition because it doesn't have the right flags set in the GPT; I've no idea if it checks that. _________________ Greybeard |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Mon Aug 05, 2024 11:25 am Post subject: |
|
|
I ran with the verbose flag, though I don't really understand most of it. I could post it if it helps. However my ESP partition has the right flags. Using parted -l gives the flags: "boot, esp" for /dev/sda1. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pietinger Moderator
![Moderator Moderator](/images/ranks/rank-mod.gif)
Joined: 17 Oct 2006 Posts: 4842 Location: Bavaria
|
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Mon Aug 05, 2024 12:42 pm Post subject: |
|
|
I don't know about the UEFI being faulty. It does accept new boot entries, for example debian. I can install and boot debian just as expected. It just does not work with gentoo. I just tried installing debian once more but without a swap partition. Then it complained that "failed to install grub bootloader". Do I have to have a swap partition? I have only tried to install gentoo without a swap partition. This shouldn't matter right? |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pietinger Moderator
![Moderator Moderator](/images/ranks/rank-mod.gif)
Joined: 17 Oct 2006 Posts: 4842 Location: Bavaria
|
Posted: Mon Aug 05, 2024 1:14 pm Post subject: |
|
|
spinojara wrote: | [...] Do I have to have a swap partition? I have only tried to install gentoo without a swap partition. This shouldn't matter right? |
No, you dont need a swap partition for the UEFI thing.
If you had debian on this system what you had in the output of "efibootmgr" ? (With version 18 of efibootmgr your dont need the parm -v anymore) _________________ https://wiki.gentoo.org/wiki/User:Pietinger |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Mon Aug 05, 2024 1:22 pm Post subject: |
|
|
Well I shouldn't, but I just tried. And now it works. All I changed during the installation process was adding a swap partition of 1GiB between the EFI and root partition. That is very weird. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pietinger Moderator
![Moderator Moderator](/images/ranks/rank-mod.gif)
Joined: 17 Oct 2006 Posts: 4842 Location: Bavaria
|
Posted: Mon Aug 05, 2024 1:53 pm Post subject: |
|
|
spinojara wrote: | Well I shouldn't, but I just tried. And now it works. All I changed during the installation process was adding a swap partition of 1GiB between the EFI and root partition. That is very weird. |
I think the real cause was something else, because you don't need a swap partition for UEFI. But it's good that everything is working now.
Have fun with Gentoo ! ![Very Happy :D](images/smiles/icon_biggrin.gif) _________________ https://wiki.gentoo.org/wiki/User:Pietinger |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
sMueggli Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 03 Sep 2022 Posts: 434
|
Posted: Mon Aug 05, 2024 3:28 pm Post subject: Re: No boot entry after grub install |
|
|
spinojara wrote: | The type of /dev/sda1 is "EFI System" and of size 1MiB. |
Why 1 MiB? Where is this value coming from? Maybe it is technically possible to create a FAT filesystem with a partition size of 1 MiB (probably with FAT12?). But I would not expect that the firmware is correctly handling such a minimal partition.
1 MiB is recommend for the "bios_grub" partition for BIOS systems on a GPT disk. But the "bios_grub" partition is a completely different thing and has nothing to do with an ESP. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
spinojara n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Aug 2024 Posts: 6
|
Posted: Tue Aug 06, 2024 11:41 am Post subject: |
|
|
I'm a bit ashamed to admit that that was indeed the problem, not the swap partition. Thank you all for the help. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
elover Apprentice
![Apprentice Apprentice](/images/ranks/rank_rect_2.gif)
Joined: 20 Nov 2019 Posts: 170 Location: Spain
|
Posted: Tue Aug 06, 2024 12:14 pm Post subject: |
|
|
I always make it 512MB or more, if I don't use dual boot I use efisetub
/boot
├── System.map-6.10.0-gentoo
├── System.map-6.10.0-gentoo.old
├─── System.map-6.10.3-gentoo.old
├── System.map-6.10.3-gentoo.old
├── amd-uc.img
├─── config-6.10.0-gentoo.old
├── config-6.10.0-gentoo.old
├── config-6.10.3-gentoo.old
├── config-6.10.3-gentoo.old
├─── efi.
│ ├─── efibootmgr_add_entry.sh
│ ├─── generate_initramfs.sh
│ ├─── initramfs.img
│ ├─── initramfs.img.old
│ ├─── vmlinuz.efi
│ └└── vmlinuz.efi.old
├── initramfs-6.10.0-gentoo.img
├── initramfs-6.10.0-gentoo.img.old
├─── initramfs-6.10.3-gentoo.img.old
├── initramfs-6.10.3-gentoo.img.old
├── vmlinuz-6.10.0-gentoo.img.old
├── vmlinuz-6.10.0-gentoo.old
├─── vmlinuz-6.10.3-gentoo.old
└── vmlinuz-6.10.3-gentoo.old
fibootmgr --verbose --create --disk "/dev/sda" --part "1" --label "gentoo" --loader '\vmlinuz.efi' --unicode 'initrd=\initramfs.img'" rd.vconsole.keymap=en rd.md.uuid=8d88f432:51eb4c2f:b9085ccf:62f63f8e rd. md.uuid=fe8503b5:ea54486e:b43cb91f:665fcc9f rd.luks.uuid=513d955b-eebd-4095-8f7f-9e93902811b2 root=UUID=c3f356b6-2045-44c6-90dc-485b8ad57a49 rd.luks.options=discard" |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
pietinger Moderator
![Moderator Moderator](/images/ranks/rank-mod.gif)
Joined: 17 Oct 2006 Posts: 4842 Location: Bavaria
|
Posted: Tue Aug 06, 2024 12:43 pm Post subject: |
|
|
spinojara wrote: | I'm a bit ashamed to admit that that was indeed the problem, not the swap partition. [...] |
No problem - no reason to be ashamed
spinojara wrote: | [...] Thank you all for the help. |
You are very Welcome
Have fun with Gentoo ! ![Cool 8)](images/smiles/icon_cool.gif) _________________ https://wiki.gentoo.org/wiki/User:Pietinger |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|