shimitar Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 23 Nov 2003 Posts: 328 Location: Italy, Torino
|
Posted: Sun Aug 11, 2024 4:46 pm Post subject: Unable to scan over network witjh SANE server |
|
|
I have an HP MFP that is supported great by HPLIP. I have a home server, and a laptop.
On the home server i have installed HPLIP, sane-backends and sane-frontends.
On the server i can find the scanner (and scanning works too):
Code: |
server ~ # scanimage -L
device `hpaio:/net/hp_colorlaserjet_mfp_m178-m181?ip=10.70.43.27&queue=false' is a Hewlett-Packard hp_colorlaserjet_mfp_m178-m181 all-in-one
|
My sane.d is running and configured to allow my laptop.
On the laptop i have sane-backends and sane-frontends installed, i have configured sane to use the "net" backend and point to the server, but i cannot find any scanner.
On the client:
Code: |
laptop ~ $ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
|
On the server log i can see that the client connects and it's whitelisted:
Code: |
Aug 11 18:43:53 server saned[677]: handle_client: spawning child process
Aug 11 18:43:53 server saned[1546]: handle_connection: processing client connection
Aug 11 18:43:53 server saned[1546]: check_host: detected an IPv4-mapped address
Aug 11 18:43:53 server saned[1546]: check_host: access by remote host: ::ffff:10.70.43.99
Aug 11 18:43:53 server saned[1546]: check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
Aug 11 18:43:53 server saned[1546]: check_host: local hostname: server
Aug 11 18:43:53 server saned[1546]: check_host: local hostname(s) (from DNS): server.casa
Aug 11 18:43:53 server saned[1546]: check_host: local hostname(s) (from DNS): (null)
Aug 11 18:43:53 server saned[1546]: check_host: local hostname(s) (from DNS): (null)
Aug 11 18:43:53 server saned[1546]: check_host: remote host doesn't have same addr as local
Aug 11 18:43:53 server saned[1546]: check_host: opening config file: /etc/hosts.equiv
Aug 11 18:43:53 server saned[1546]: check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
Aug 11 18:43:53 server saned[1546]: check_host: opening config file: saned.conf
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# saned.conf'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# Configuration for the saned daemon'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `## Daemon options'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# Port range for the data connection. Choose a range inside [1024 - 65535].'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# Avoid specifying too large a range, for performance reasons.'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `#'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# ONLY use this if your saned server is sitting behind a firewall. If your'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# firewall is a Linux machine, we strongly recommend using the'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# Netfilter nf_conntrack_sane connection tracking module instead.'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `#'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# data_portrange = 10000 - 10100'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `## Access list'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# A list of host names, IP addresses or IP subnets (CIDR notation) that'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# are permitted to use local SANE devices. IPv6 addresses must be enclosed'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# in brackets, and should always be specified in their compressed form.'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `#'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `# The hostname matching is not case-sensitive.'
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `localhost'
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: ::1
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: ::1
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: ::1
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: 127.0.0.1
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: 127.0.0.1
Aug 11 18:43:53 server saned[1546]: check_host: DNS lookup returns IP address: 127.0.0.1
Aug 11 18:43:53 server saned[1546]: check_host: config file line: `10.70.43.0/24'
Aug 11 18:43:53 server saned[1546]: check_host: subnet with base IP = 10.70.43.0, CIDR netmask = 24
Aug 11 18:43:53 server saned[1546]: check_host: access granted from IP address 10.70.43.99 (in subnet 10.70.43.0/24)
Aug 11 18:43:53 server saned[1546]: init: access granted
Aug 11 18:43:53 server saned[1546]: init: access granted to willy@::ffff:10.70.43.99
Aug 11 18:43:53 server saned[1546]: process_request: waiting for request
Aug 11 18:43:53 server saned[1546]: process_request: got request 1
Aug 11 18:43:53 server saned[1546]: process_request: waiting for request
Aug 11 18:43:53 server saned[1546]: process_request: got request 10
Aug 11 18:43:54 server saned[1546]: quit: exiting
|
( i have increased sane debug verbosity to the maximum level here)
So it seems that it's not a connection issue. Yet, no scanners are found.
I am at a loss. The Wiki doesn't help and i could not find much online.
Anybody has ideas?
thanks. _________________ Willy Gardiol
willy@gardiol.org |
|