| View previous topic :: View next topic |
| Author |
Message |
FarLobster
n00b
Joined: 05 Jul 2024
Posts: 4
Location: Canada
|
 Posted: Mon Aug 26, 2024 2:57 pm Post subject: Failed to install sys-firmware/intel-microcode-20240813_p202 |
 |
|
Hey ya'll, I was attempted to do a full update of my packages, and ran into this error with intel microcode:
| Code: | * checking 305 files for package collisions
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/share/doc/intel-microcode-20240813_p20240815/releasenote.md.bz2
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-firmware/intel-microcode-20240813_p20240815' merged
* despite file collisions. If necessary, refer to your elog messages for
* the whole content of the above message.
>>> Merging sys-firmware/intel-microcode-20240813_p20240815 to /
* Your /boot partition was detected as being mounted.
* Files will be installed there for intel-microcode to function correctly.
* Assuming you do not have a separate /efi partition.
* Assuming you do not have a separate /boot/efi partition.
* Assuming you do not have a separate /boot/EFI partition.
--- /usr/
--- /usr/share/
--- /usr/share/doc/
--- /usr/share/doc/intel-microcode-20240813_p20240815/
=== /usr/share/doc/intel-microcode-20240813_p20240815/releasenote.md.bz2
--- /usr/lib/
--- /usr/lib/kernel/
--- /usr/lib/kernel/preinst.d/
=== /usr/lib/kernel/preinst.d/35-intel-microcode.install
--- /usr/lib/kernel/install.d/
=== /usr/lib/kernel/install.d/35-intel-microcode-systemd.install
--- /usr/lib/dracut/
--- /usr/lib/dracut/dracut.conf.d/
=== /usr/lib/dracut/dracut.conf.d/15-intel-microcode.conf
--- /boot/
[WARNING] _do_sendfile failed unexpectedly
Traceback (most recent call last):
File "/usr/lib/python3.12/site-packages/portage/util/file_copy.py", line 111, in _fastcopy
_do_sendfile(srcfd, dstfd, offset, count)
File "/usr/lib/python3.12/site-packages/portage/util/file_copy.py", line 73, in _do_sendfile
written = os.sendfile(dst, src, offset, c)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
OSError: [Errno 28] No space left on device
!!! copy /var/tmp/portage/sys-firmware/intel-microcode-20240813_p20240815/image/boot/intel-uc.img -> /boot/intel-uc.img failed.
!!! [Errno 28] No space left on device: b'/var/tmp/portage/sys-firmware/intel-microcode-20240813_p20240815/image/boot/intel-uc.img' -> b'/boot/intel-uc.img#new'
>>> Completed (1 of 51) sys-firmware/intel-microcode-20240813_p20240815::gentoo
>>> Failed to install sys-firmware/intel-microcode-20240813_p20240815, Log file:
>>> '/var/tmp/portage/sys-firmware/intel-microcode-20240813_p20240815/temp/build.log'
* Messages for package sys-firmware/intel-microcode-20240813_p20240815:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/share/doc/intel-microcode-20240813_p20240815/releasenote.md.bz2
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-firmware/intel-microcode-20240813_p20240815' merged
* despite file collisions. If necessary, refer to your elog messages for
* the whole content of the above message.
* GNU info directory index is up-to-date.
* After world updates, it is important to remove obsolete packages with
* emerge --depclean. Refer to `man emerge` for more information.
[ERROR] Task was destroyed but it is pending!
task: <Task pending name='Task-3095' coro=<ForkProcess._main() running at /usr/lib/python3.12/site-packages/portage/util/_async/ForkProcess.py:197> wait_for=<Future pending cb=[AsynchronousTask.async_wait.<locals>.<lambda>() at /usr/lib/python3.12/site-packages/_emerge/AsynchronousTask.py:49, Task.task_wakeup()]> cb=[SpawnProcess._main_exit()]>
[ERROR] Task was destroyed but it is pending!
task: <Task pending name='Task-3094' coro=<PipeLogger._io_loop() running at /usr/lib/python3.12/site-packages/portage/util/_async/PipeLogger.py:97> wait_for=<Future pending cb=[Task.task_wakeup()]> cb=[PipeLogger._io_loop_done()]>
[ERROR] Task was destroyed but it is pending!
task: <Task pending name='Task-3093' coro=<BuildLogger._main() running at /usr/lib/python3.12/site-packages/portage/util/_async/BuildLogger.py:134> wait_for=<Future pending cb=[AsynchronousTask.async_wait.<locals>.<lambda>() at /usr/lib/python3.12/site-packages/_emerge/AsynchronousTask.py:49, Task.task_wakeup()]> cb=[BuildLogger._main_exit()]>
[ERROR] Task was destroyed but it is pending!
task: <Task pending name='Task-3092' coro=<PipeLogger._io_loop() running at /usr/lib/python3.12/site-packages/portage/util/_async/PipeLogger.py:97> wait_for=<Future pending cb=[Task.task_wakeup()]> cb=[PipeLogger._io_loop_done()]>
|
I've attempted to remove the file collision, but that has only removed the file collision and not the other error.
My emerge info:
| Code: |
Portage 3.0.65 (python 3.12.5-final-0, default/linux/amd64/23.0/hardened, gcc-14, glibc-2.40, 6.6.32-gentoo-dist x86_64)
=================================================================
System uname: Linux-6.6.32-gentoo-dist-x86_64-Intel-R-_Core-TM-_i5-4690_CPU_@_3.50GHz-with-glibc2.40
KiB Mem: 32756640 total, 17657648 free
KiB Swap: 2097148 total, 2097148 free
Timestamp of repository gentoo: Mon, 26 Aug 2024 14:00:00 +0000
Head commit of repository gentoo: 1ca47163c2c7c223d2a120092c2489d007e4eeb7
Timestamp of repository guru: Sun, 25 Aug 2024 15:48:57 +0000
Head commit of repository guru: fa6476980e99d4bd7cc52d8a0f6b9278fc0de401
Timestamp of repository steam-overlay: Fri, 23 Aug 2024 21:33:51 +0000
Head commit of repository steam-overlay: 1057828cc4261082ad3faf418c27176e0282557b
Timestamp of repository torbrowser: Wed, 21 Aug 2024 17:48:47 +0000
Head commit of repository torbrowser: 934664b8bd4b7d2ae33ee5d43459c77f3535923c
Head commit of repository librewolf: ad8bd23b0fad08885620d6cc08a92d7ac0e68e61
sh bash 5.2_p32
ld GNU ld (Gentoo 2.43 p1) 2.43.0
app-misc/pax-utils: 1.3.7::gentoo
app-shells/bash: 5.2_p32::gentoo
dev-build/autoconf: 2.13-r8::gentoo, 2.72-r1::gentoo
dev-build/automake: 1.17-r1::gentoo
dev-build/cmake: 3.30.2::gentoo
dev-build/libtool: 2.4.7-r4::gentoo
dev-build/make: 4.4.1-r1::gentoo
dev-build/meson: 1.5.1::gentoo
dev-java/java-config: 2.3.4::gentoo
dev-lang/perl: 5.40.0::gentoo
dev-lang/python: 3.12.5::gentoo, 3.13.0_rc1_p1::gentoo
dev-lang/rust-bin: 1.80.1::gentoo
sys-apps/baselayout: 2.15::gentoo
sys-apps/openrc: 0.54.2::gentoo
sys-apps/sandbox: 2.39::gentoo
sys-devel/binutils: 2.43::gentoo
sys-devel/binutils-config: 5.5.2::gentoo
sys-devel/clang: 18.1.8::gentoo
sys-devel/gcc: 14.2.0::gentoo
sys-devel/gcc-config: 2.11::gentoo
sys-devel/lld: 18.1.8::gentoo
sys-devel/llvm: 18.1.8-r4::gentoo
sys-kernel/linux-headers: 6.10::gentoo (virtual/os-headers)
sys-libs/glibc: 2.40::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
volatile: False
sync-rsync-verify-max-age: 3
sync-rsync-extra-opts:
sync-rsync-verify-jobs: 1
sync-rsync-verify-metamanifest: yes
guru
location: /var/db/repos/guru
sync-type: git
sync-uri: https://github.com/gentoo-mirror/guru.git
masters: gentoo
volatile: False
steam-overlay
location: /var/db/repos/steam-overlay
sync-type: git
sync-uri: https://github.com/gentoo-mirror/steam-overlay.git
masters: gentoo
volatile: False
torbrowser
location: /var/db/repos/torbrowser
sync-type: git
sync-uri: https://github.com/gentoo-mirror/torbrowser.git
masters: gentoo
volatile: False
librewolf
location: /var/db/repos/librewolf
sync-type: git
sync-uri: https://codeberg.org/librewolf/gentoo.git
masters: gentoo
priority: 50
volatile: False
Binary Repositories:
gentoobinhost
priority: 1
sync-uri: https://distfiles.gentoo.org/releases/amd64/binpackages/23.0/x86-64
ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS="-march=native -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs binpkg-multi-instance buildpkg-live candy config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync merge-wait multilib-strict network-sandbox news parallel-fetch parallel-install pid-sandbox pkgdir-index-trusted preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=native -O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="C.UTF8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs"
LEX="flex"
MAKEOPTS="-j7"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="X acl alsa amd64 brotli bzip2 cet crypt cups dbus elogind gdbm hardened harfbuzz iconv icu ipv6 jpeg libtirpc multilib ncurses nls openmp pam pcre pic pie pulseaudio readline seccomp ssl ssp test-rust unicode vulkan xattr xtpax zlib" ABI_X86="64" ADA_TARGET="gcc_12" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_anon authn_dbm authn_file authz_dbm authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir env expires ext_filter file_cache filter headers include info log_config logio mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 aes avx avx2 f16c fma3 pclmul popcnt rdrand sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 ntrip navcom oceanserver oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 tsip tripmate tnt ublox" GRUB_PLATFORMS="efi-64" GUILE_SINGLE_TARGET="3-0" GUILE_TARGETS="3-0" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz glk hd44780 lb216 lcdm001 mtxorb text" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php8-2" POSTGRES_TARGETS="postgres15" PYTHON_SINGLE_TARGET="python3_12" PYTHON_TARGETS="python3_12" RUBY_TARGETS="ruby31 ruby32" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipp2p iface geoip fuzzy condition tarpit sysrq proto logmark ipmark dhcpmac delude chaos account"
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EMERGE_DEFAULT_OPTS, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LFLAGS, LIBTOOL, LINGUAS, MAKE, MAKEFLAGS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PYTHONPATH, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS
|
If anyone needs more information regarding my portage info or hardware info, I'd be happy to provide them.
Last edited by FarLobster on Mon Aug 26, 2024 4:51 pm; edited 1 time in total |
|
| Back to top |
|
 |
CooSee
Veteran
Joined: 20 Nov 2004
Posts: 1468
Location: Earth
|
| Posted: Mon Aug 26, 2024 3:25 pm Post subject: |
|
|
Welcome to Gentoo,
| Code: | [
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
OSError: [Errno 28] No space left on device |
check your /boot partition - seems full.
_________________
" Die Realität ist eine Illusion, die durch Mangel an ehrlicher Kommunikation entsteht "
---
" Der Mensch ist von Natur aus neugierig, was am Ende übrig bleibt ist die Gier " |
|
| Back to top |
|
|
FarLobster
n00b
Joined: 05 Jul 2024
Posts: 4
Location: Canada
|
| Posted: Mon Aug 26, 2024 4:04 pm Post subject: |
|
|
Yeah, I just checked my boot partiton and it's full of old kernels.
| Code: |
EFI grub
System.map-6.10.2-gentoo-dist initramfs-6.10.2-gentoo-dist.img
System.map-6.10.3-gentoo-dist initramfs-6.10.3-gentoo-dist.img
System.map-6.10.4-gentoo-dist initramfs-6.10.4-gentoo-dist.img
System.map-6.6.32-gentoo-dist initramfs-6.6.32-gentoo-dist.img
System.map-6.9.10-gentoo-dist initramfs-6.9.10-gentoo-dist.img
System.map-6.9.11-gentoo-dist initramfs-6.9.11-gentoo-dist.img
System.map-6.9.7-gentoo-dist initramfs-6.9.7-gentoo-dist.img
System.map-6.9.8-gentoo-dist initramfs-6.9.8-gentoo-dist.img
System.map-6.9.9-gentoo-dist initramfs-6.9.9-gentoo-dist.img
amd-uc.img intel-uc.img
config-6.10.2-gentoo-dist vmlinuz-6.10.2-gentoo-dist
config-6.10.3-gentoo-dist vmlinuz-6.10.3-gentoo-dist
config-6.10.4-gentoo-dist vmlinuz-6.10.4-gentoo-dist
config-6.6.32-gentoo-dist vmlinuz-6.6.32-gentoo-dist
config-6.9.10-gentoo-dist vmlinuz-6.9.10-gentoo-dist
config-6.9.11-gentoo-dist vmlinuz-6.9.11-gentoo-dist
config-6.9.7-gentoo-dist vmlinuz-6.9.7-gentoo-dist
config-6.9.8-gentoo-dist vmlinuz-6.9.8-gentoo-dist
config-6.9.9-gentoo-dist vmlinuz-6.9.9-gentoo-dist
early_ucode.cpio
|
What can I do to remove all the old kernels? |
|
| Back to top |
|
|
sMueggli
Guru
Joined: 03 Sep 2022
Posts: 489
|
|
| Back to top |
|
|
FarLobster
n00b
Joined: 05 Jul 2024
Posts: 4
Location: Canada
|
| Posted: Mon Aug 26, 2024 4:51 pm Post subject: |
|
|
| It worked! Thanks! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
