| View previous topic :: View next topic |
| Author |
Message |
pegu
n00b
Joined: 19 Sep 2003
Posts: 54
|
 Posted: Tue Oct 01, 2024 10:28 am Post subject: EFI + gentoo-sources and grub |
 |
|
In https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Disks#Mounting_the_root_partition the following commands are given to create the /efi mount point in the rootfs:
| Code: |
root #mount /dev/sda3 /mnt/gentoo
root #mkdir --parents /mnt/gentoo/efi
|
Next in https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Base#UEFI_systems the efi partition will be mounted on on /efi in the chroot environment:
| Code: |
root #mount /dev/sda1 /efi
|
In https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Kernel#Compiling_and_installing it will install the compiled kernel in /boot:
| Code: |
make && make modules_install
make install
|
This will simply install the kernel in /boot which is a subdirectory of the rootfs. Shouldn't the kernel be installed in /efi?
When I try to run make install I get a message saying that it can't find LILO which is not selected anywhere in the process.
| Code: |
/usr/src/linux # make install
INSTALL /boot
Cannot find LILO.
|
BTW, further up it's stated that "Installkernel may be used to automate the kernel installation." which indicate that this step is optional.
In https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Bootloader#UEFI_systems grub is installed, which results in no errors:
| Code: |
/usr/src/linux # grub-install --efi-directory=/efi
Installing for x86_64-efi platform.
Installation finished. No error reported.
|
The grub config will also be stored in the /boot directory on the rootfs according to https://wiki.gentoo.org/wiki/Handbook:AMD64/Installation/Bootloader#Configure
| Code: |
/usr/src/linux # grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
|
Now the kernel is in the rootfs and grub is on the efi partition. How does grub find the kernel?
When I boot this system I only get a single grub entry with "UEFI Firmware Settings". I can interrupt it and boot the system from the grub command line by setting the root and specify the location of the kernel and root partition.
Shouldn't the efi partition be mounted at /boot prior to "make install" in order for grub to find these? Or what steps have I missed or what is missing in the installation guide when using EFI and building the kernel from gentoo-sources? |
|
| Back to top |
|
 |
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4907
Location: Bavaria
|
| Posted: Tue Oct 01, 2024 11:35 am Post subject: |
|
|
Most of what you have written is completely correct, even if you doubt it. 
Yes, it makes no difference whether you mount /efi BEFORE you chroot (with mount /dev/sda1 /mnt/gentoo/efi) or after you have changed via chroot (with mount /dev/sda1 /efi). Example: https://wiki.gentoo.org/wiki/User:Pietinger/Draft/Quick_Installation_OpenRC_for_an_UEFI_System#Mount_partitions
Until septermber 2023 the moutpoint for the ESP was indeed /boot. It was then changed to /efi. See more here: https://forums.gentoo.org/viewtopic-t-1165115-highlight-.html
Yes, this means that you mount the ESP on /efi, while /boot is an ordinary directory of the root directory (and thus located on the root partition).
GRUB consists of two parts. The first part can be started by UEFI and must therefore be on the ESP (exactly: \efi\gentoo\grubx64.efi). This part knows where the second part is located (this happens during the installation of grub with grub-install). The second part of grub is now located in /boot/grub (and thus on the root parttion). This second part reads the grub.cfg and now knows where the kernel is located.
If your grub does not find the kernel, it may be because the name of your kernel (in /boot) does not correspond to a standard and therefore the “grub-mkconfig” has not found a kernel (although there is one) and has not entered a kernel in the grub.cfg. This is exactly what your output from grub-mkconfig shows. I am missing a: “Found linux image: ...”
The installkernel influences the “make install” (via hooks) and therefore installkernel should be installed. Another possibility would be to copy the kernel itself (“make install” does nothing else). Have a look at this: https://wiki.gentoo.org/wiki/User:Pietinger/Tutorials/Manual_kernel_configuration#Cheat_Sheets
If you need more help, we would need the output of:
- ls -l /boot
- efibootmgr
- and the content of grub.cfg
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
pegu
n00b
Joined: 19 Sep 2003
Posts: 54
|
| Posted: Tue Oct 01, 2024 1:50 pm Post subject: |
|
|
| pietinger wrote: |
The installkernel influences the “make install” (via hooks) and therefore installkernel should be installed. |
Then the handbook should be updated stating that it should be installed and used rather than it may be used in this particular case?
| pietinger wrote: |
If your grub does not find the kernel, it may be because the name of your kernel (in /boot) does not correspond to a standard.
|
Again the handbook should be updated if installkernel is required to follow the correct naming convention in order for grub to find the kernel as the default vmlinuz does not seem to work. |
|
| Back to top |
|
|
sMueggli
Guru
Joined: 03 Sep 2022
Posts: 446
|
| Posted: Tue Oct 01, 2024 4:00 pm Post subject: |
|
|
And please show also | Code: | | emerge -pv installkernel |
|
|
| Back to top |
|
|
AndrewAmmerlaan
Developer
Joined: 25 Jun 2014
Posts: 385
Location: Nijmegen
|
| Posted: Tue Oct 01, 2024 5:35 pm Post subject: |
|
|
| Quote: | | Again the handbook should be updated if installkernel is required to follow the correct naming convention in order for grub to find the kernel as the default vmlinuz does not seem to work. |
The default 'vmlinuz' does not work because it is missing a version identifier (which grub-mkconfig requires). That however does not mean that you cannot boot the plain 'vmlinuz' with grub, you'd simply have to register it manually or give it some name manually.
sys-kernel/installkernel exists for users who want semi- or full-auto installations of versioned kernel images, "may" is used in the handbook because we have many users who prefer to do things manually instead.
_________________
OS: Gentoo 6.8.10-gentoo-dist, ~amd64, 23.0/desktop/plasma/systemd
MB: MSI Z370-A PRO
CPU: Intel Core i9-9900KS
GPU: Intel Arc A770 16GB & Intel UHD Graphics 630
SSD: Samsung 970 EVO Plus 2 TB
RAM: Crucial Ballistix 32GB DDR4-2400 |
|
| Back to top |
|
|
|
Installing Gentoo
