| View previous topic :: View next topic |
| Author |
Message |
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
 Posted: Sun Nov 10, 2024 10:23 pm Post subject: wine fails mprotect for READ+EXECUTE when launching programs |
 |
|
as said in title, wine fails to launch any windows programs.
here is the trace from one:
| Code: |
002c:err:winediag:getaddrinfo Failed to resolve your host name IP
0054:err:virtual:map_image_into_view failed to set 60000060 protection on L"\\??\\C:\\windows\\system32\\drivers\\mountmgr.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE7688D0 at address 00006FFFFE7688D0 (thread 0054), starting debugger...
007c:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winex11.drv" section .text, noexec filesystem?
0084:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winex11.drv" section .text, noexec filesystem?
007c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
007c:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
007c:err:systray:initialize_systray Could not create tray window
007c:err:ole:start_rpcss Failed to start RpcSs service
0084:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0084:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0084:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0084:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0084:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0084:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80070578
0084:err:ole:CoMarshalInterface Failed to marshal the interface {<UUID REDACTED>}, hr 0x80070578
0084:err:ole:apartment_get_local_server_stream Failed: 0x80070578
0084:err:ole:start_rpcss Failed to start RpcSs service
0074:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0074:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
006c:fixme:dbghelp:elf_search_auxv can't find symbol in module
006c:fixme:dbghelp:elf_search_auxv can't find symbol in module
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"mountmgr.sys"
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
006c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"MountMgr" failed to start: 1053
00ac:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\wineusb.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFEA02510 at address 00006FFFFEA02510 (thread 00ac), starting debugger...
00c4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00c4:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
00bc:fixme:dbghelp:elf_search_auxv can't find symbol in module
00bc:fixme:dbghelp:elf_search_auxv can't find symbol in module
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"wineusb.sys"
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
00bc:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"wineusb" failed to start: 1053
003c:err:service:process_send_start_message pipe connect failed
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"winebus" failed to start: 1053
00f0:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\nsiproxy.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE9C2050 at address 00006FFFFE9C2050 (thread 00f0), starting debugger...
011c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
011c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0114:fixme:dbghelp:elf_search_auxv can't find symbol in module
0114:fixme:dbghelp:elf_search_auxv can't find symbol in module
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"nsiproxy.sys"
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
0114:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"nsiproxy" failed to start: 1053
003c:err:service:process_send_start_message pipe connect failed
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"NDIS" failed to start: 1053
002c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
002c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
012c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
012c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0140:err:virtual:map_image_into_view failed to set 60000060 protection on L"\\??\\C:\\windows\\system32\\drivers\\mountmgr.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE9B88D0 at address 00006FFFFE9B88D0 (thread 0140), starting debugger...
0158:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0158:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0150:fixme:dbghelp:elf_search_auxv can't find symbol in module
0150:fixme:dbghelp:elf_search_auxv can't find symbol in module
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"mountmgr.sys"
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
0150:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
0050:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
0164:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0164:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
^C^C^C^C^C0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\imaadp32.acm" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\msadp32.acm" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\msg711.acm" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\l3codeca.acm" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\msgsm32.acm" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winspool.drv" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\l3codecx.ax" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\spool\\prtprocs\\x64\\wineps.drv" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winspool.drv" section .text, noexec filesystem?
0164:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winspool.drv" section .text, noexec filesystem?
0188:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\ndis.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE363340 at address 00006FFFFE363340 (thread 0188), starting debugger...
01a0:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
01a0:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0198:fixme:dbghelp:elf_search_auxv can't find symbol in module
0198:fixme:dbghelp:elf_search_auxv can't find symbol in module
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ndis.sys"
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
0198:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
0174:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
01b4:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\nsiproxy.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE372050 at address 00006FFFFE372050 (thread 01b4), starting debugger...
01cc:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
01cc:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
01c4:fixme:dbghelp:elf_search_auxv can't find symbol in module
01c4:fixme:dbghelp:elf_search_auxv can't find symbol in module
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"nsiproxy.sys"
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
01c4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
0174:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
01d8:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
01d8:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\imaadp32.acm" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\msadp32.acm" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\msg711.acm" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\l3codeca.acm" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\msgsm32.acm" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\winspool.drv" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\l3codecx.ax" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\spool\\prtprocs\\w32x86\\wineps.drv" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\winspool.drv" section .text, noexec filesystem?
01d8:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\syswow64\\winspool.drv" section .text, noexec filesystem?
01e4:fixme:console:default_ctrl_handler Terminating process 20 on event 0
|
here's the FS mount options:
| Code: |
/dev/mapper/vg0-root on / type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=261,subvol=/@root)
/dev/mapper/vg0-root on /etc type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=266,subvol=/@etc)
/dev/mapper/vg0-root on /usr type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=264,subvol=/@usr)
sysfs on /sys type sysfs (rw,relatime,seclabel)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,nosuid,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,seclabel,size=6555888k,nr_inodes=819200,mode=755,inode64)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime,seclabel)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
none on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate)
dev on /dev type devtmpfs (rw,nosuid,noexec,relatime,seclabel,size=10240k,nr_inodes=4093679,mode=755,inode64)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime,seclabel)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,seclabel,gid=5,mode=620,ptmxmode=000)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,seclabel,inode64)
/dev/mapper/boot on /boot type ext2 (rw,noatime,seclabel,errors=continue,user_xattr,acl)
/dev/sdb3 on /boot/efi type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro)
/dev/mapper/vg0-root on /home type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=262,subvol=/@home)
/dev/mapper/vg0-root on /var type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=263,subvol=/@var)
/dev/mapper/vg0-root on /etc type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=266,subvol=/@etc)
/dev/mapper/vg0-root on /usr type btrfs (rw,noatime,seclabel,compress=zstd:15,ssd,space_cache=v2,autodefrag,subvolid=264,subvol=/@usr)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,seclabel,size=3277940k,nr_inodes=819485,mode=700,uid=1000,gid=1000,inode64)
portal on /run/user/1000/doc type fuse.portal (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/mapper/luks-{REDACTED UUID} on /run/media/{REDACTED USERNAME}/{REDACTED UUID} type btrfs (rw,nosuid,nodev,relatime,seclabel,space_cache=v2,subvolid=5,subvol=/,uhelper=udisks2)
|
i'm not sure why it's complaining about a "noexec filesystem", nor how to fix this (i've tried both wine, and wine-proton, both with similar results.)
help is appreciated
Last edited by Shadow_Fury on Mon Nov 18, 2024 7:17 pm; edited 5 times in total |
|
| Back to top |
|
 |
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Mon Nov 11, 2024 12:21 am Post subject: |
|
|
| Afaik the"noexec" bit is just an assumption that wine makes (thus the question mark) and it can be blocked by something else. In this case I'd suspect selinux, but I never used it nor know much about so I can't really help with that. |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 11, 2024 12:27 am Post subject: |
|
|
| Ionen wrote: | | Afaik the"noexec" bit is just an assumption that wine makes (thus the question mark) and it can be blocked by something else. In this case I'd suspect selinux, but I never used it nor know much about so I can't really help with that. |
whilst SElinux is installed, it is currently in permissive mode (fresh install), so i don't think that it's causing the problem |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Tue Nov 12, 2024 12:21 am Post subject: |
|
|
| Ok, double checked, definitely not SElinux. re-compiled a kernel with none of the major LSMs (SElinux, SMACK, TOMOYO, APPARMOUR etc). same error. |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 5:53 pm Post subject: |
|
|
did some digging around the wine source code (relevant file). the thing generating the error is:
| Code: |
if (!set_vprot( view, ptr + sec->VirtualAddress, size, vprot ) && (vprot & VPROT_EXEC))
ERR( "failed to set %08x protection on %s section %.8s, noexec filesystem?\n",
(int)sec->Characteristics, debugstr_w(filename), sec->Name );
|
which calls set_vprot:
| Code: |
/***********************************************************************
* set_vprot
*
* Change the protection of a range of pages.
*/
static BOOL set_vprot( struct file_view *view, void *base, size_t size, BYTE vprot )
{
if (view->protect & VPROT_WRITEWATCH)
{
/* each page may need different protections depending on write watch flag */
set_page_vprot_bits( base, size, vprot & ~VPROT_WRITEWATCH, ~vprot & ~VPROT_WRITEWATCH );
mprotect_range( base, size, 0, 0 );
return TRUE;
}
if (enable_write_exceptions && is_vprot_exec_write( vprot )) vprot |= VPROT_WRITEWATCH;
if (mprotect_exec( base, size, get_unix_prot(vprot) )) return FALSE;
set_page_vprot( base, size, vprot );
return TRUE;
}
|
the only thing in here that returns FALSE (thus tripping the error message is mprotect_exec:
| Code: |
static inline int mprotect_exec( void *base, size_t size, int unix_prot )
{
if (force_exec_prot && (unix_prot & PROT_READ) && !(unix_prot & PROT_EXEC))
{
TRACE( "forcing exec permission on %p-%p\n", base, (char *)base + size - 1 );
if (!mprotect( base, size, unix_prot | PROT_EXEC )) return 0;
/* exec + write may legitimately fail, in that case fall back to write only */
if (!(unix_prot & PROT_WRITE)) return -1;
}
return mprotect( base, size, unix_prot );
}
|
which is calling mprotect.
60000020 protection corresponds to (as taken from winnt.h):
| Code: |
IMAGE_SCN_CNT_CODE 0x00000020
IMAGE_SCN_MEM_EXECUTE 0x20000000
IMAGE_SCN_MEM_READ 0x40000000
|
based on the get_unix_prot function, the corresponding flags for mprotect are READ and EXECUTE
this fails for some reason.
any help figuring this out is appreciated (and sorely needed) |
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 22842
|
| Posted: Mon Nov 18, 2024 5:58 pm Post subject: |
|
|
| If you make a simple C program (or Python script, via ctypes) that opens and attempts to map that file as write+execute, does that fail too? That would let us rule out anything Wine is doing, and would make for a much simpler test case. What are the file permissions on the offending file? What are the mount options on the containing filesystem? Your above list of all mounts is not directly usable here, since we don't know definitively which Linux filesystem holds the Windows path that Wine is failing on. |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Mon Nov 18, 2024 6:08 pm Post subject: |
|
|
fwiw does it work if you create the wine prefix on an entirely different filesystem?
e.g. tmpfs rather than btrfs, preferably without any special flags -- even seclabel just in case unless that's forced (hardly know selinux), and esp. not noexec so don't use /dev/shm as your trial tmpfs
btrfs in itself shouldn't cause issues for wine but I do suspect there's some configuration being set somewhere that's causing problems, maybe even some protection setting set at filesystem creation? I don't know the things that btrfs can do well. If tmpfs fails too, then could at least rule out that it's specific to that btrfs filesystem (assuming it's even what was being used like Hu pointed) |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 6:18 pm Post subject: |
|
|
| Hu wrote: | | If you make a simple C program (or Python script, via ctypes) that opens and attempts to map that file as write+execute, does that fail too? That would let us rule out anything Wine is doing, and would make for a much simpler test case. What are the file permissions on the offending file? What are the mount options on the containing filesystem? Your above list of all mounts is not directly usable here, since we don't know definitively which Linux filesystem holds the Windows path that Wine is failing on. |
just tried this based on code from here
modified as such:
| Code: |
-if (mprotect(buffer + pagesize * 2, pagesize, PROT_READ) == -1) handle_error("mprotect");
+if (mprotect(buffer + pagesize * 2, pagesize, PROT_READ | PROT_EXEC) == -1) handle_error("mprotect");
|
the program does not raise any error about mprotect, so it seems to be working.
the file permissions for the above mentioned mountmgr.sys (in the relevant prefix) are "-rw-r--r--". i've tried adding execute permissions, it doesn't help.
the prefix is located on the btrfs @home subvolume, so i assume those are the relevant mount options
will try to map the specific wine file next, and see if that still fails |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 7:00 pm Post subject: |
|
|
| Hu wrote: | | If you make a simple C program (or Python script, via ctypes) that opens and attempts to map that file as write+execute, does that fail too? That would let us rule out anything Wine is doing, and would make for a much simpler test case. What are the file permissions on the offending file? What are the mount options on the containing filesystem? Your above list of all mounts is not directly usable here, since we don't know definitively which Linux filesystem holds the Windows path that Wine is failing on. |
ok, wrote this short program. loading the file, and doing mprotect on it seems to succeed just fine (if i've written the program wrong, let me know)
| Code: |
#include <malloc.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <unistd.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
static char *buffer;
int main(int argc, char ** argv)
{
int pagesize;
if (argc !=2)
{
printf("use: test [FILENAME]\n");
exit(EXIT_FAILURE);
}
FILE *f = fopen(argv[1], "rb");
fseek(f, 0, SEEK_END);
long fsize = ftell(f);
rewind(f);
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1)
handle_error("sysconf");
long file_pages = fsize/pagesize + (fsize % pagesize != 0); //round file pages up to closest integer
buffer = memalign(pagesize, file_pages * pagesize);
if (buffer == NULL)
handle_error("memalign");
printf("Start of region: %p\n", buffer);
fread(buffer, fsize, 1, f);
if (mprotect(buffer + pagesize * 2, pagesize,
PROT_READ | PROT_EXEC) == -1)
handle_error("mprotect");
printf("file mprotect succeeded!\n");
exit(EXIT_SUCCESS);
}
|
ran it with:
| Code: |
./test /home/{USER REDACTED}/Downloads/npp.8.2.portable.x64/pfx/drive_c/windows/system32/drivers/mountmgr.sys
|
(i'm using notepad++ as a test application), this location is on the BTRFS @home subvolume)
one note: wine seems to be mprotecting just the .text sections of the file, not the whole file (based on the error message that wine gives). not sure if that matters
edit note: mapping as write+exec works too (though wine maps as read+exec)
Last edited by Shadow_Fury on Mon Nov 18, 2024 7:37 pm; edited 2 times in total |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 7:16 pm Post subject: |
|
|
| Ionen wrote: | fwiw does it work if you create the wine prefix on an entirely different filesystem?
e.g. tmpfs rather than btrfs, preferably without any special flags -- even seclabel just in case unless that's forced (hardly know selinux), and esp. not noexec so don't use /dev/shm as your trial tmpfs
btrfs in itself shouldn't cause issues for wine but I do suspect there's some configuration being set somewhere that's causing problems, maybe even some protection setting set at filesystem creation? I don't know the things that btrfs can do well. If tmpfs fails too, then could at least rule out that it's specific to that btrfs filesystem (assuming it's even what was being used like Hu pointed) |
tried it on a USB formatted to ext4, with following mount options:
| Code: |
/dev/sdd1 on /mnt type ext4 (rw,relatime,seclabel)
|
(seclabel is forced, but it doesn't seem to do anything:
"seclabel is an indicator added by the selinux code, that the filesystem is using xattrs for labels and that it supports label changes by setting the xattrs. (see here))
here is the trace from that:
| Code: |
002c:err:winediag:getaddrinfo Failed to resolve your host name IP
0054:err:virtual:map_image_into_view failed to set 60000060 protection on L"\\??\\C:\\windows\\system32\\drivers\\mountmgr.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE7688D0 at address 00006FFFFE7688D0 (thread 0054), starting debugger...
0074:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winex11.drv" section .text, noexec filesystem?
007c:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winex11.drv" section .text, noexec filesystem?
0074:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0074:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
0074:err:systray:initialize_systray Could not create tray window
0074:err:ole:start_rpcss Failed to start RpcSs service
007c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
007c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
007c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
007c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
007c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
007c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80070578
007c:err:ole:CoMarshalInterface Failed to marshal the interface {<UUDI REDACTED>}, hr 0x80070578
007c:err:ole:apartment_get_local_server_stream Failed: 0x80070578
007c:err:ole:start_rpcss Failed to start RpcSs service
006c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
006c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0064:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0064:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
0064:fixme:dbghelp:elf_search_auxv can't find symbol in module
0064:fixme:dbghelp:elf_search_auxv can't find symbol in module
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"mountmgr.sys"
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
0064:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"MountMgr" failed to start: 1053
00a4:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\wineusb.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFEA02510 at address 00006FFFFEA02510 (thread 00a4), starting debugger...
00bc:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00bc:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
00b4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00b4:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
00b4:fixme:dbghelp:elf_search_auxv can't find symbol in module
00b4:fixme:dbghelp:elf_search_auxv can't find symbol in module
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"wineusb.sys"
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
00b4:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"wineusb" failed to start: 1053
003c:err:service:process_send_start_message pipe connect failed
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"winebus" failed to start: 1053
00fc:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\drivers\\nsiproxy.sys" section .text, noexec filesystem?
wine: Unhandled page fault on execute access to 00006FFFFE9E2050 at address 00006FFFFE9E2050 (thread 00fc), starting debugger...
0114:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0114:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
010c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
010c:err:winediag:nodrv_CreateWindow L"Unknown error (998)."
010c:fixme:dbghelp:elf_search_auxv can't find symbol in module
010c:fixme:dbghelp:elf_search_auxv can't find symbol in module
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"nsiproxy.sys"
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntoskrnl"
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"winedevice"
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"sechost"
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"kernel32"
010c:err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"ntdll"
003c:err:service:process_send_command service protocol error - failed to read pipe r = 0 count = 0!
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"nsiproxy" failed to start: 1053
003c:err:service:process_send_start_message pipe connect failed
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"NDIS" failed to start: 1053
012c:err:virtual:map_image_into_view failed to set 60000020 protection on L"\\??\\C:\\windows\\system32\\winspool.drv" section .text, noexec filesystem?
012c:err:module:loader_init "winspool.drv" failed to initialize, aborting
012c:err:module:loader_init Initializing dlls for L"Z:\\mnt\\npp.8.7.portable.x64\\notepad++.exe" failed, status c0000005
|
|
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Mon Nov 18, 2024 7:37 pm Post subject: |
|
|
I see, odd...
If I create a wineprefix on an actual noexec filesystem, the errors I get are a bit different (none of the "section" stuff): | Code: | | 00f8:err:virtual:map_file_into_view failed to set PROT_EXEC on file map, noexec filesystem? |
Still no real idea why it's reaching that other error for you.
I don't think we've seen emerge --info yet? Is it a typical wine build with gcc + "-march=native -O2" or is there some special *FLAGS, clang/lld, or such involved? Given selinux I'm gonna guess it's a hardened profile that sets extras, but if hardened profiles broke wine I think we'd know by now (not that I tried).
Last edited by Ionen on Mon Nov 18, 2024 7:42 pm; edited 1 time in total |
|
| Back to top |
|
|
Hu
Administrator
Joined: 06 Mar 2007
Posts: 22842
|
| Posted: Mon Nov 18, 2024 7:41 pm Post subject: |
|
|
| I think that test program is incorrect. You open and read the file, but then memalign allocates heap memory, and you adjust the permissions on that heap memory. This tells us nothing about whether you could change the protection of the mapping of the file. I think you need to open the file with open, map some or all of it with mmap, then use mprotect to change the protection on the mapping from mmap. |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Mon Nov 18, 2024 7:48 pm Post subject: |
|
|
| Shadow_Fury wrote: | | Ok, double checked, definitely not SElinux. re-compiled a kernel with none of the major LSMs (SElinux, SMACK, TOMOYO, APPARMOUR etc). same error. |
On that note, maybe try gentoo-kernel-bin if haven't yet -- maybe not related to these but maybe you're missing an option if it's a custom/minimalist kernel, or it's something else set that just haven't been suspecting.
Edit: given the list, does sound like your kernel has a lot going on |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 8:03 pm Post subject: |
|
|
| Hu wrote: | | I think that test program is incorrect. You open and read the file, but then memalign allocates heap memory, and you adjust the permissions on that heap memory. This tells us nothing about whether you could change the protection of the mapping of the file. I think you need to open the file with open, map some or all of it with mmap, then use mprotect to change the protection on the mapping from mmap. |
new test program (based on this):
| Code: |
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
int fd;
char *addr;
off_t offset, pa_offset;
size_t length;
ssize_t s;
struct stat sb;
if (argc < 3 || argc > 4) {
fprintf(stderr, "%s file offset [length]\n", argv[0]);
exit(EXIT_FAILURE);
}
fd = open(argv[1], O_RDONLY);
if (fd == -1)
handle_error("open");
if (fstat(fd, &sb) == -1) /* To obtain file size */
handle_error("fstat");
offset = atoi(argv[2]);
pa_offset = offset & ~(sysconf(_SC_PAGE_SIZE) - 1);
/* offset for mmap() must be page aligned */
if (offset >= sb.st_size) {
fprintf(stderr, "offset is past end of file\n");
exit(EXIT_FAILURE);
}
if (argc == 4) {
length = atoi(argv[3]);
if (offset + length > sb.st_size)
length = sb.st_size - offset;
/* Can't display bytes past end of file */
} else { /* No length arg ==> display to end of file */
length = sb.st_size - offset;
}
addr = mmap(NULL, length + offset - pa_offset, PROT_READ,
MAP_PRIVATE, fd, pa_offset);
if (addr == MAP_FAILED)
handle_error("mmap");
if (mprotect(addr, length + offset - pa_offset,
PROT_WRITE | PROT_EXEC) == -1)
handle_error("mprotect");
else printf("mprotect success!\n");
s = write(STDOUT_FILENO, addr + offset - pa_offset, length);
if (s != length) {
if (s == -1)
handle_error("write");
fprintf(stderr, "partial write");
exit(EXIT_FAILURE);
}
munmap(addr, length + offset - pa_offset);
close(fd);
exit(EXIT_SUCCESS);
}
|
everything works fine. mprotect executes and returns without erroring.
executed as:
| Code: |
./test_mmap ~/Downloads/npp.8.7.portable.x64/pfx/drive_c/windows/system32/drivers/mountmgr.sys 0
|
|
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Mon Nov 18, 2024 8:22 pm Post subject: |
|
|
| Ionen wrote: | | Shadow_Fury wrote: | | Ok, double checked, definitely not SElinux. re-compiled a kernel with none of the major LSMs (SElinux, SMACK, TOMOYO, APPARMOUR etc). same error. |
On that note, maybe try gentoo-kernel-bin if haven't yet -- maybe not related to these but maybe you're missing an option if it's a custom/minimalist kernel, or it's something else set that just haven't been suspecting.
Edit: given the list, does sound like your kernel has a lot going on |
i can't seem to install my video drivers (nvidia-drivers) when using a dist kernel. would chrooting from a liveUSB be an adequate substitute for this test? (i'm also happy to post the .config file, if that would help) |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Mon Nov 18, 2024 11:03 pm Post subject: |
|
|
| Shadow_Fury wrote: | | i can't seem to install my video drivers (nvidia-drivers) when using a dist kernel. would chrooting from a liveUSB be an adequate substitute for this test? (i'm also happy to post the .config file, if that would help) |
It should be fine albeit making graphical applications work in a chroot can be finicky if don't already know how to do it (unless can reproduce with a CLI-only wine application), albeit I don't see why you wouldn't be able to build nvidia-drivers with gentoo-kernel-bin, I do that all the time for testing (it's what I use when I stabilize nvidia-drivers versions ;p)
.config wouldn't hurt to give (along with emerge --info too), maybe someone else will have an idea looking at it (myself I don't know which option to suspect so I doubt I could do much with it unless I build a kernel using it and try to make it work with my own system which well... -- either way better rule it out by trying a generic kernel before wasting time with it) |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Tue Nov 19, 2024 1:49 am Post subject: |
|
|
| For another possibility, are you using any custom sysctl settings? (/etc/sysctl.d and such) -- don't know if anything in there could cause this who knows. |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Tue Nov 19, 2024 9:27 pm Post subject: |
|
|
| Ionen wrote: | | For another possibility, are you using any custom sysctl settings? (/etc/sysctl.d and such) -- don't know if anything in there could cause this who knows. |
haven't set any custom sysctl settings (yet), so that's not it.
| Ionen wrote: | | Shadow_Fury wrote: | | i can't seem to install my video drivers (nvidia-drivers) when using a dist kernel. would chrooting from a liveUSB be an adequate substitute for this test? (i'm also happy to post the .config file, if that would help) |
It should be fine albeit making graphical applications work in a chroot can be finicky if don't already know how to do it (unless can reproduce with a CLI-only wine application), albeit I don't see why you wouldn't be able to build nvidia-drivers with gentoo-kernel-bin, I do that all the time for testing (it's what I use when I stabilize nvidia-drivers versions ;p)
.config wouldn't hurt to give (along with emerge --info too), maybe someone else will have an idea looking at it (myself I don't know which option to suspect so I doubt I could do much with it unless I build a kernel using it and try to make it work with my own system which well... -- either way better rule it out by trying a generic kernel before wasting time with it) |
I happened to have a garuda USB lying around, so i used that. i used tcping al a CLI only test program. I chrooted to my drive and tried to run both wine (predictably) complained that it couldn't get X authorization, but then ran the application (both 64 and 32 bit variants) no problem, so it does, indeed, seem to be a kernel issue. here are the wine traces, just in case:
WINEPREFIX=$(pwd)/pfx32 WINEARCH=win32 wine-vanilla tcping.exe -h puri.sm :
| Code: |
wine: created the configuration directory '/home/<USERNAME REDACTED>/Downloads/winetest/pfx32'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
004c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
004c:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
004c:err:systray:initialize_systray Could not create tray window
004c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
004c:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
004c:err:ole:apartment_get_local_server_stream Failed: 0x80004002
002c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
002c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0054:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0054:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80070578
0054:err:ole:CoMarshalInterface Failed to marshal the interface {<UUID REDACTED>
0054:err:ole:apartment_get_local_server_stream Failed: 0x80070578
0054:err:ole:start_rpcss Failed to open RpcSs service
0044:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0044:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0094:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0094:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0094:fixme:file:NtLockFile I/O completion on lock not implemented yet
0094:fixme:ntdll:NtQuerySystemInformation info_class SYSTEM_PERFORMANCE_INFORMATION
0094:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
0094:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0100:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0100:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
0100:fixme:wineusb:query_id Unhandled ID query type 0x5.
** Requesting from puri.sm:
(for various reasons, kbit/s is an approximation)
Probing 138.68.253.24:80/tcp - HTTP is open - time=148.001ms rcv_time=147.335 status=301 bytes=356 kbit/s=~19.
330
Probing 138.68.253.24:80/tcp - HTTP is open - time=143.682ms rcv_time=143.191 status=301 bytes=356 kbit/s=~19.
890
Probing 138.68.253.24:80/tcp - HTTP is open - time=142.570ms rcv_time=141.580 status=301 bytes=356 kbit/s=~20.
116
Probing 138.68.253.24:80/tcp - HTTP is open - time=144.033ms rcv_time=144.521 status=301 bytes=356 kbit/s=~19.
707
Ping statistics for 138.68.253.24:80
4 probes sent.
4 successful, 0 failed. (0.00% fail)
Approximate trip times in milli-seconds:
Minimum = 142.570ms, Maximum = 148.001ms, Average = 144.572ms
Approximate download times in milli-seconds:
|
WINEPREFIX=$(pwd)/pfx64 WINEARCH=win64 wine-vanilla tcping64.exe -h puri.sm :
| Code: |
wine: created the configuration directory '/home/shadow/Downloads/winetest/pfx64'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
Authorization required, but no authorization protocol specified
004c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
004c:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
004c:err:systray:initialize_systray Could not create tray window
004c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
004c:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
004c:err:ole:apartment_get_local_server_stream Failed: 0x80004002
0044:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0044:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0054:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0054:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:apartment_createwindowifneeded CreateWindow failed with error 1400
0054:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80070578
0054:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80070578
0054:err:ole:apartment_get_local_server_stream Failed: 0x80070578
0054:err:ole:start_rpcss Failed to open RpcSs service
002c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
002c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0094:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0094:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0094:fixme:file:NtLockFile I/O completion on lock not implemented yet
0094:fixme:ntdll:NtQuerySystemInformation info_class SYSTEM_PERFORMANCE_INFORMATION
0094:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
0094:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
00f4:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
00f4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00f4:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0118:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0118:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
0118:fixme:wineusb:query_id Unhandled ID query type 0x5.
** Requesting from puri.sm:
(for various reasons, kbit/s is an approximation)
Probing 138.68.253.24:80/tcp - HTTP is open - time=145.258ms rcv_time=143.477 status=301 bytes=356 kbit/s=~19.
850
Probing 138.68.253.24:80/tcp - HTTP is open - time=149.521ms rcv_time=144.589 status=301 bytes=356 kbit/s=~19.
697
Probing 138.68.253.24:80/tcp - HTTP is open - time=146.704ms rcv_time=145.586 status=301 bytes=356 kbit/s=~19.
562
Probing 138.68.253.24:80/tcp - HTTP is open - time=143.599ms rcv_time=143.014 status=301 bytes=356 kbit/s=~19.
914
Ping statistics for 138.68.253.24:80
4 probes sent.
4 successful, 0 failed. (0.00% fail)
Approximate trip times in milli-seconds:
Minimum = 143.599ms, Maximum = 149.521ms, Average = 146.270ms
Approximate download times in milli-seconds:
|
as seen above, they work fine.
here is the kernel .config file. i'm not sure what could be causing an mprotect issue, but apparently, i've done something bad here. (was following this to apply KSPP settings).
Edit: and, yes, when ran on the native system, the above commands produce the same mprotect error on the mountmgr.sys file as mentioned in the first post of this thread |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Tue Nov 19, 2024 9:56 pm Post subject: |
|
|
| Shadow_Fury wrote: | | here is the kernel .config file. i'm not sure what could be causing an mprotect issue |
By comparing with my own configs I at least don't think it's due to something that's "not set" when it should (aka "think" everything that's important is set), so there's probably an option "set" that's breaking it but I have no idea what it could be beside seeming likely that it's one of these hardening options that I've never tried. |
|
| Back to top |
|
|
Shadow_Fury
Apprentice
Joined: 20 Apr 2021
Posts: 196
Location: 11.435765792823453, 143.05926743686274
|
| Posted: Tue Nov 19, 2024 10:25 pm Post subject: |
|
|
| is there a good way to get a "base" config? i don't remember which options i changed from default, so generating a "stock" config would be useful. Alternatively, if you have a known good config (i.e. one where wine works fine) , i could try that to make absolutely sure it's the config. |
|
| Back to top |
|
|
Ionen
Developer
Joined: 06 Dec 2018
Posts: 2882
|
| Posted: Wed Nov 20, 2024 12:58 am Post subject: |
|
|
| Shadow_Fury wrote: | | is there a good way to get a "base" config? i don't remember which options i changed from default, so generating a "stock" config would be useful. Alternatively, if you have a known good config (i.e. one where wine works fine) , i could try that to make absolutely sure it's the config. |
`make defconfig` albeit that likely won't be bootable as-is, it's more of a starting line to configure a kernel yourself with the things you need.
Otherwise there's gentoo-kernel's default config for a generic kernel that will work for about everyone (aka, known good), but that enables a lot and will make it hard to compare. Also takes a while to build, thus why -bin exists (fwiw I use gentoo-kernel with USE=savedconfig for my own smaller config).
Edit: If would rather not lose sleep over the kernel, simply using -bin (permanently) works for most, I'm sure your nvidia-drivers build issues can be resolved. Extra security features can be nice, but those that aren't default can often mean added annoying limitations, obscure issues due to being less tested, or notable performance hits and aren't necessarily worth the trouble. -bin enables most of the reasonable ones (based on fedora's configs, so same as there), and so does gcc/clang by default for the whole system. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gamers & Players
