| View previous topic :: View next topic |
| Author |
Message |
sublogic
Apprentice
Joined: 21 Mar 2022
Posts: 274
Location: Pennsylvania, USA
|
 Posted: Sun Nov 24, 2024 2:20 am Post subject: My layout confuses grub |
 |
|
Summary:
My new-to-me laptop arrived this week. Install time. I followed the amd64 handbook, deviating only to set up encrypted partitons for data protection at rest (best done at install time). Kernel is gentoo-kernel-bin, ugrd for the initramfs, grub for bootloader. The storage is gpt-partitioned like so: | Code: |
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme0n1 259:0 0 238.5G 0 disk
├─nvme0n1p1 259:1 0 1G 0 part /efi
└─nvme0n1p2 259:2 0 237.5G 0 part
└─cleartxt 253:0 0 237.5G 0 crypt
├─vg0-swap 253:1 0 32G 0 lvm [SWAP]
├─vg0-root 253:2 0 40G 0 lvm /
└─vg0-home 253:3 0 40G 0 lvm /home |
There isn't a separate boot partition, all the booting bits must go under /efi. Apparently when I emerged gentoo-kernel-bin,- emerge ran installkernel,
- installkernel copied the files to the right place, and
- installkernel ran ugrd, which generated a good initramfs, and
- installkernel ran grub-mkconfig, which found the kernel and initramfs, but
- grub-mkconfig created a bad grub.cfg .
Why ? Isn't this a supported layout ? What did I miss ?
============================================================================
Details:
Upon rebooting I got this: | Code: | Booting `Gentoo GNU/Linux'
error: no such device: 70611462-a82b-4c7d-abe6-1b5a29b0a24f
Loading Linux 6.6.58-gentoo-dist ...
error: no server is specified
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue...
Failed to boot both default and fallback entries.
Press any key to continue... |
(Typed from a screenshot.)
Duckduckgo to the rescue: press "any key" as told, look around in the grub shell using "ls" and "set root". | Code: | grub> ls
(hd0) (hd0,gpt2) (hd0,gpt1)
grub> set root=(hd0,gpt1)
grub> ls /
efi/
grub> ls /efi
gentoo/
grub> ls /efi/gentoo
amd-uc.img vmlinuz-6.6.58-gentoo-dist.efi initramfs-6.6.58-gentoo-dist.img System.map-6.6.58-gentoo-dist |
HAH ! It's obvious now. The /efi/EFI/gentoo/grub/grub.cfg is garbage.
Boot rescue media and replace it by this: | Code: | set root=(hd0,gpt1)
menuentry 'Gentoo Linux 6.6.58' {
echo 'loading kernel...'
linux /efi/gentoo/vmlinuz-6.6.58-gentoo-dist.efi
echo 'loading initramfs...'
initrd /efi/gentoo/initramfs-6.6.58-gentoo-dist.img
}
menuentry 'UEFI firmware settings' {
fwsetup
} |
And that worked. I'm typing this from the laptop in question. But it's a band-aid. I would like future kernel upgrades to automatially generate a proper grub.cfg like they should.
Here's the bad grub.cfg (wgetpaste) . And emerge --info (wgetpaste)
Deviations and choices from the handbook: | Code: | ==> /etc/portage/package.use/installkernel <==
sys-kernel/installkernel grub ugrd
sys-kernel/gentoo-kernel -initramfs
sys-kernel/gentoo-kernel-bin -initramfs
==> /etc/kernel/install.conf <==
# This file is managed by sys-kernel/installkernel
layout=efistub
initrd_generator=ugrd
uki_generator=none |
Files after "emerge sys-kernel/gentoo-kernel-bin": | Code: | ls -F /efi/EFI/gentoo
amd-uc.img* initramfs-6.6.58-gentoo-dist.img*
config-6.6.58-gentoo-dist* System.map-6.6.58-gentoo-dist*
grub/ vmlinuz-6.6.58-gentoo-dist.efi*
ls -F /efi/EFI/gentoo/grub
fonts/ grub.cfg* grubenv* locale/ themes/ x86_64-efi/ |
At Bootloader default: grub: | Code: | | # grub-install --efi-directory=/efi --boot-directory=/efi/EFI/gentoo |
That must have worked, because there was a grubx64.efi* in /efi/EFI/gentoo and the UEFI firmware went straight to grub. The only thing messed up was the grub.cfg .
So, what step did I skip that confused grub-mkconfig ?
Or is my setup not directly supported by grub-mkconfig ? |
|
| Back to top |
|
 |
jburns
Veteran
Joined: 18 Jan 2007
Posts: 1220
Location: Massachusetts USA
|
| Posted: Sun Nov 24, 2024 4:16 am Post subject: |
|
|
| Did you mount the /efi partition? |
|
| Back to top |
|
|
sMueggli
Guru
Joined: 03 Sep 2022
Posts: 500
|
| Posted: Sun Nov 24, 2024 9:12 am Post subject: |
|
|
The first decision you have to make: Do you want an encrypted /boot or not? It looks like you do not want an encrypted /boot because you are copying everything to the unencrypted /efi mountpoint.
In case of an unencrypted /boot you have to ask yourself, whether you want to abuse the ESP as /boot or have separate partitions for /efi and /boot.
After you have a clear idea of how you want to setup the system, you can execute "grub-install" and "grub-mkconfig" and should have a valid grub.cfg. |
|
| Back to top |
|
|
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3735
Location: Rasi, Finland
|
| Posted: Sun Nov 24, 2024 9:52 am Post subject: |
|
|
| sMueggli wrote: | | The first decision you have to make: Do you want an encrypted /boot or not? It looks like you do not want an encrypted /boot because you are copying everything to the unencrypted /efi mountpoint. |
Yes. I think that's the intention of the OP. | sublogic wrote: | | Code: |
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme0n1 259:0 0 238.5G 0 disk
├─nvme0n1p1 259:1 0 1G 0 part /efi
└─nvme0n1p2 259:2 0 237.5G 0 part
└─cleartxt 253:0 0 237.5G 0 crypt
├─vg0-swap 253:1 0 32G 0 lvm [SWAP]
├─vg0-root 253:2 0 40G 0 lvm /
└─vg0-home 253:3 0 40G 0 lvm /home |
There isn't a separate boot partition, all the booting bits must go under /efi. |
As for mounting the /efi, I think kernel ebuilds do not mount /efi automatically, so you have to do that manually, or by writing a pre_pkg_preinst() function to /etc/portage/env/sys-kernel/gentoo-kernel/my_automount_efi.sh for example. I think there are alternative (better) ways to accomplish the automounting...
_________________
..: Zucca :..
| My gentoo installs: | init=/sbin/openrc-init
-systemd -logind -elogind seatd |
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
Nowa
Developer
Joined: 25 Jun 2014
Posts: 432
Location: Nijmegen
|
| Posted: Sun Nov 24, 2024 12:54 pm Post subject: |
|
|
GRUB (specifically grub-mkconfig) does not support the efistub layout, only the grub layout. If you want your kernels on the ESP and use GRUB at the same time, then the solution is to mount the ESP at /boot.
_________________
OS: Gentoo 6.10.12-gentoo-dist, ~amd64, 23.0/desktop/plasma/systemd
MB: MSI Z370-A PRO
CPU: Intel Core i9-9900KS
GPU: Intel Arc A770 16GB & Intel UHD Graphics 630
SSD: Samsung 970 EVO Plus 2 TB
RAM: Crucial Ballistix 32GB DDR4-2400 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Installing Gentoo
