| View previous topic :: View next topic |
| Author |
Message |
ccgllc
n00b
Joined: 21 Jul 2018
Posts: 28
Location: NE Missouri
|
 Posted: Fri Dec 13, 2024 9:28 pm Post subject: zpool create failure |
 |
|
Having problems creating a raidz2 zfs pool. This is a new AMD Ryzen 9 9950X, with the 870E chipset (relatively new).
Disk are brand new Seagate Enterprise 8GB drives.
| Code: | livecd /etc/init.d # zpool create -f scratch raidz2 sda sdb sdc sdd sde sdf
cannot label 'sda': failed to detect device partitions on '/dev/sda1': 19
Error preparing/labeling disk.
livecd /etc/init.d # parted /dev/sda print
Model: ATA ST8000NM0045-1RL (scsi)
Disk /dev/sda: 8002GB
Sector size (logical/physical): 4096B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 8389kB 8001GB 8001GB zfs-390b67c250463a8f
9 8001GB 8002GB 67.1MB |
I've done similar things successfully in the past. These will be the only non-nvme disk in the system, so the device names are highly unlikely to change.
I've tried dd zeroing sda, no change.
Would sure appreciate some suggestions!
_________________
Linux since 0.96 kernel on a 4 floppy slackware distribution |
|
| Back to top |
|
 |
John R. Graham
Administrator
Joined: 08 Mar 2005
Posts: 10674
Location: Somewhere over Atlanta, Georgia
|
| Posted: Sat Dec 14, 2024 3:15 pm Post subject: |
|
|
Have you tried with full path names of the devices (for example, "/dev/sda" as opposed to "sda")? Also, myself, I've never tried bare devices, but rather only ever partitions.
- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Other Things Gentoo
