VulgarBulgar
n00b
Joined: 04 Oct 2023
Posts: 21
|
 Posted: Tue Jan 28, 2025 1:04 am Post subject: Problem with Eduroam Connection |
 |
|
Hello everyone!
For about the past month I've had problems with connecting to eduroam. Essentially I'll connect and after >5 minutes my connection will disconnect, I should note that it's only eduroam that has this problem, but then again it's the only wpa2-eap network I use. I was thinking it might be a problem between caused by the powersaving options but when I tested for that it wasn't the case. I use NetworkManager with wpa_supplicant if it makes any difference.
Here's some select output from dmesg:
| Code: |
[Jan28 00:49] wlp6s0: authenticate with ${BSSID_1}
[ +0.498109] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.023181] wlp6s0: authenticated
[ +0.000620] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.020707] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1111 status=0 aid=6)
[ +0.029944] wlp6s0: associated
[ +0.213434] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by ${BSSID_1}
[ +34.033058] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.870163] wlp6s0: authenticate with ${BSSID_2}
[ +0.172071] wlp6s0: send auth to ${BSSID_2} (try 1/3)
[ +0.003605] wlp6s0: authenticated
[ +0.000481] wlp6s0: associate with ${BSSID_2} (try 1/3)
[ +0.047195] wlp6s0: RX AssocResp from ${BSSID_2} (capab=0x1411 status=0 aid=2)
[ +0.032869] wlp6s0: associated
[ +0.112733] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_2}
[Jan28 00:50] wlp6s0: deauthenticating from ${BSSID_2} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.880898] wlp6s0: authenticate with ${BSSID_1}
[ +0.034900] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003516] wlp6s0: authenticated
[ +0.003710] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.017594] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1111 status=0 aid=3)
[ +0.034074] wlp6s0: associated
[ +0.053878] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by ${BSSID_1}
[ +33.995137] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[Jan28 00:51] wlp6s0: authenticate with ${BSSID_2}
[ +0.032212] wlp6s0: send auth to ${BSSID_2} (try 1/3)
[ +0.003566] wlp6s0: authenticated
[ +0.006703] wlp6s0: associate with ${BSSID_2} (try 1/3)
[ +0.014000] wlp6s0: RX AssocResp from ${BSSID_2} (capab=0x1411 status=0 aid=1)
[ +0.034059] wlp6s0: associated
[ +0.063666] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_2}
[ +33.992225] wlp6s0: deauthenticating from ${BSSID_2} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.850887] wlp6s0: authenticate with ${BSSID_1}
[ +0.036953] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003495] wlp6s0: authenticated
[ +0.004866] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.016275] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1111 status=0 aid=3)
[ +0.033502] wlp6s0: associated
[ +0.055976] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by ${BSSID_1}
[Jan28 00:52] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.820854] wlp6s0: authenticate with ${BSSID_2}
[ +0.034304] wlp6s0: send auth to ${BSSID_2} (try 1/3)
[ +0.040987] wlp6s0: authenticated
[ +0.003478] wlp6s0: associate with ${BSSID_2} (try 1/3)
[ +0.035970] wlp6s0: RX AssocResp from ${BSSID_2} (capab=0x1411 status=0 aid=1)
[ +0.033885] wlp6s0: associated
[ +0.000090] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_2}
[ +34.053868] wlp6s0: deauthenticating from ${BSSID_2} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.826893] wlp6s0: authenticate with ${BSSID_1}
[ +0.036929] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003577] wlp6s0: authenticated
[ +0.005581] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.015508] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1111 status=0 aid=1)
[ +0.034805] wlp6s0: associated
[ +0.000097] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by ${BSSID_1}
[Jan28 00:53] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
|
and rarely it does this:
| Code: |
[Jan28 01:53] wlp6s0: authenticate with ${BSSID_1}
[ +0.032188] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003462] wlp6s0: authenticated
[ +0.000274] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.020951] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1411 status=0 aid=1)
[ +0.035604] wlp6s0: associated
[ +0.000079] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_1}
[ +33.943680] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.987855] wlp6s0: authenticate with ${BSSID_2}
[ +0.034886] wlp6s0: send auth to ${BSSID_2} (try 1/3)
[ +0.003659] wlp6s0: authenticated
[ +0.003220] wlp6s0: associate with ${BSSID_2} (try 1/3)
[ +0.018311] wlp6s0: RX AssocResp from ${BSSID_2} (capab=0x1111 status=0 aid=6)
[ +0.034251] wlp6s0: associated
[ +0.052214] wlp6s0: Limiting TX power to 23 (23 - 0) dBm as advertised by ${BSSID_2}
[Jan28 01:54] wlp6s0: deauthenticating from ${BSSID_2} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.907037] wlp6s0: authenticate with ${BSSID_1}
[ +0.032286] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003592] wlp6s0: authenticated
[ +0.003105] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.018184] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1411 status=0 aid=2)
[ +0.035318] wlp6s0: associated
[ +0.050943] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_1}
[ +33.965969] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.990683] wlp6s0: authenticate with ${BSSID_3}
[ +0.162505] wlp6s0: send auth to ${BSSID_3} (try 1/3)
[ +0.003482] wlp6s0: authenticated
[ +0.002882] wlp6s0: associate with ${BSSID_3} (try 1/3)
[ +0.019277] wlp6s0: RX AssocResp from ${BSSID_3} (capab=0x1411 status=0 aid=1)
[ +0.034675] wlp6s0: associated
[ +0.000217] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_3}
[Jan28 01:55] wlp6s0: deauthenticating from ${BSSID_3} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +3.392735] wlp6s0: authenticate with ${BSSID_1}
[ +0.033320] wlp6s0: send auth to ${BSSID_1} (try 1/3)
[ +0.003524] wlp6s0: authenticated
[ +0.002874] wlp6s0: associate with ${BSSID_1} (try 1/3)
[ +0.047764] wlp6s0: RX AssocResp from ${BSSID_1} (capab=0x1411 status=0 aid=2)
[ +0.034149] wlp6s0: associated
[ +0.052122] wlp6s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ${BSSID_1}
[Jan28 01:56] wlp6s0: deauthenticating from ${BSSID_1} by local choice (Reason: 3=DEAUTH_LEAVING)
[ +2.990354] wlp6s0: authenticate with ${BSSID_4}
[ +0.495002] wlp6s0: send auth to ${BSSID_4} (try 1/3)
[ +0.010896] wlp6s0: send auth to ${BSSID_4} (try 2/3)
[ +0.014826] wlp6s0: send auth to ${BSSID_4} (try 3/3)
[ +0.011212] wlp6s0: authentication with ${BSSID_4} timed out
[ +1.463564] wlp6s0: authenticate with ${BSSID_5}
[ +0.498205] wlp6s0: send auth to ${BSSID_5} (try 1/3)
[ +0.010537] wlp6s0: send auth to ${BSSID_5} (try 2/3)
[ +0.010365] wlp6s0: send auth to ${BSSID_5} (try 3/3)
[ +0.011352] wlp6s0: authentication with ${BSSID_5} timed out
[ +1.503782] wlp6s0: authenticate with ${BSSID_6}
[ +0.179987] wlp6s0: send auth to ${BSSID_6} (try 1/3)
[ +0.009999] wlp6s0: send auth to ${BSSID_6} (try 2/3)
[ +0.010339] wlp6s0: send auth to ${BSSID_6} (try 3/3)
[ +0.010193] wlp6s0: authentication with ${BSSID_6} timed out
|
Any help would be greatly appreciated! 
_________________
Sometimes you can't help but laugh at the absurdity of it all |
|
Networking & Security
