| View previous topic :: View next topic |
| Author |
Message |
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
 Posted: Mon Dec 22, 2003 1:39 pm Post subject: Getting cdburner to work with ATAPI in 2.6 |
 |
|
Hi, i have been trying to get my cdburner to work with 2.6 kernel but without any luck, i had it working with scsi-emulation in 2.4
My burner is detected properly (i have removed the scsi-append thing from lilo (and rerun it))
| Code: | igor cdrdao # cdrecord -scanbus
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'ATAPI ' 'CD-RW 52XMax ' '140D' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
|
| Code: | igor cdrdao # cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'ATAPI ' 'CD-RW 52XMax ' '140D' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
|
| Code: | igor cdrdao # cdrecord dev=/dev/hdb speed=16 -pad -swab /home/mariux/dilbert.iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
scsidev: '/dev/hdb'
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
|
| Code: | igor cdrdao # cdrecord dev=0,1,0 speed=16 -v /home/mariux/dilbert.iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Using libscg version 'schily-0.7'
SCSI buffer size: 32768
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 1994752 = 1948 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 527 MB
Total size: 605 MB (59:58.36) = 269877 sectors
Lout start: 605 MB (60:00/27) = 269877 sectors
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
|
| Code: | igor cdrdao # cdrecord dev=ATAPI:0,1,0 speed=16 -v /home/mariux/dilbert.iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 1994752 = 1948 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 527 MB
Total size: 605 MB (59:58.36) = 269877 sectors
Lout start: 605 MB (60:00/27) = 269877 sectors
cdrecord: No disk / Wrong disk!
|
| Code: | igor cdrdao # cdrecord dev=ATAPI:/dev/hdb speed=16 -v /home/mariux/dilbert.iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:/dev/hdb'
devname: 'ATAPI:/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 1994752 = 1948 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 527 MB
Total size: 605 MB (59:58.36) = 269877 sectors
Lout start: 605 MB (60:00/27) = 269877 sectors
cdrecord: No disk / Wrong disk!
|
I've tried both alpha14 and 20 of cdrtools
And i am running cdrdao 1.1.7-r1
You i DO have a cd in the cdburner:-)
I currently have scsi-emulation compiled into the kernel (i didnt have at first and it made any difference [i think])
I have updated to k3b 0.10.3 but that didnt help either:
Burning iso:
| Code: | System
-----------------------
K3b Version: 0.10.3
KDE Version: 3.1.4
QT Version: 3.2.3
cdrecord
-----------------------
scsidev: '/dev/ide/host0/bus0/target1/lun0/cd'
devname: '/dev/ide/host0/bus0/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 1994752 = 1948 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: No disk / Wrong disk!
Track 01: data 527 MB
Total size: 605 MB (59:58.33) = 269875 sectors
Lout start: 605 MB (60:00/25) = 269875 sectors
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus0/target1/lun0/cd speed=16 -dao driveropts=burnfree -eject -overburn -data /home/mariux/dilbert.iso
|
(it asks for an empty cd, i push "Force")
Burning data:
| Code: | System
-----------------------
K3b Version: 0.10.3
KDE Version: 3.1.4
QT Version: 3.2.3
cdrecord
-----------------------
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-RW 52XMax '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 1994752 = 1948 KB
FIFO size : 4194304 = 4096 KB
scsidev: '/dev/ide/host0/bus0/target1/lun0/cd'
devname: '/dev/ide/host0/bus0/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
/usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: No disk / Wrong disk!
Track 01: data 527 MB
Total size: 605 MB (59:58.33) = 269875 sectors
Lout start: 605 MB (60:00/25) = 269875 sectors
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus0/target1/lun0/cd speed=16 -dao driveropts=burnfree -eject -overburn -data -tsize=269875s -
mkisofs
-----------------------
269875
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.10.3 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.10.3 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-mariux/k3b6XfUwa.tmp -r -hide-list /tmp/kde-mariux/k3bqgFoQa.tmp -l -iso-level 2 -path-list /tmp/kde-mariux/k3bsBu6mc.tmp
|
(it asks for an empty cd, i push "Force")
Do i have to enable anything specific to be able to burn with atapi? |
|
| Back to top |
|
 |
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Mon Dec 22, 2003 1:42 pm Post subject: |
|
|
here is my dmesg:
| Code: | 1, io base 00001840
uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver xpad
drivers/usb/input/xpad.c: X-Box pad driver:v0.0.5
mice: PS/2 mouse device common for all mice
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver
vt596 smbus 0000:00:14.4: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Advanced Linux Sound Architecture Driver Version 1.0.0rc2.
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Sound Blaster Live! (rev.7) at 0x1800, irq 10
NET: Registered protocol family 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d01222a1d171]
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (4096 buckets, 32768 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI: (supports S0 S1 S5)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hdd3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hdd3) for (hdd3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 396k freed
Adding 506512k swap on /dev/hdd2. Priority:-1 extents:1
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda5) for (hda5)
Using r5 hash to sort names
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth1: link up, 10Mbps, half-duplex, lpa 0x0000
eth0: no IPv6 routers present
eth1: no IPv6 routers present
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 5 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 6 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 7 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 8 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 9 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 10 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 30119 bytes, found (1280x1024, 30961 bytes, v3).
bootsplash: status on console 11 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c011d28c>] __might_sleep+0xac/0xe0
[<c013f527>] kmem_cache_alloc+0x67/0x70
[<c014e1e1>] __get_vm_area+0x21/0x100
[<c014e2f3>] get_vm_area+0x33/0x40
[<c011a5a2>] __ioremap+0xc2/0x120
[<c011a629>] ioremap_nocache+0x29/0xb0
[<e1b90465>] os_map_kernel_space+0x68/0x6c [nvidia]
[<e1ba2a57>] __nvsym00568+0x1f/0x2c [nvidia]
[<e1ba4b76>] __nvsym00775+0x6e/0xe0 [nvidia]
[<e1ba4c06>] __nvsym00781+0x1e/0x190 [nvidia]
[<e1ba668c>] rm_init_adapter+0xc/0x10 [nvidia]
[<e1b8cee0>] nv_kern_open+0xf5/0x232 [nvidia]
[<c015d470>] chrdev_open+0xc0/0x1d0
[<c01b99ad>] devfs_open+0xed/0x110
[<c0152fd2>] dentry_open+0x112/0x180
[<c0152eb6>] filp_open+0x66/0x70
[<c01532c5>] sys_open+0x55/0x90
[<c010b4cb>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c011d28c>] __might_sleep+0xac/0xe0
[<c013f527>] kmem_cache_alloc+0x67/0x70
[<c014e1e1>] __get_vm_area+0x21/0x100
[<c014e2f3>] get_vm_area+0x33/0x40
[<c011a5a2>] __ioremap+0xc2/0x120
[<c011a629>] ioremap_nocache+0x29/0xb0
[<e1b90465>] os_map_kernel_space+0x68/0x6c [nvidia]
[<e1ba2a57>] __nvsym00568+0x1f/0x2c [nvidia]
[<e1ba4b76>] __nvsym00775+0x6e/0xe0 [nvidia]
[<e1ba4c06>] __nvsym00781+0x1e/0x190 [nvidia]
[<e1ba668c>] rm_init_adapter+0xc/0x10 [nvidia]
[<e1b8cee0>] nv_kern_open+0xf5/0x232 [nvidia]
[<c015d470>] chrdev_open+0xc0/0x1d0
[<c01b99ad>] devfs_open+0xed/0x110
[<c0152fd2>] dentry_open+0x112/0x180
[<c0152eb6>] filp_open+0x66/0x70
[<c01532c5>] sys_open+0x55/0x90
[<c010b4cb>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c011d28c>] __might_sleep+0xac/0xe0
[<e1ba2928>] __nvsym00323+0x10/0x14 [nvidia]
[<c013f5b9>] __kmalloc+0x89/0x90
[<e1b8fbee>] os_alloc_mem+0x5c/0x87 [nvidia]
[<e1ba2b74>] __nvsym00083+0x10/0x24 [nvidia]
[<e1c4b34f>] __nvsym03944+0x1af/0x2c0 [nvidia]
[<e1cb2bbd>] __nvsym00780+0x11d/0x224 [nvidia]
[<e1ba47bc>] __nvsym00773+0x1c/0x5c [nvidia]
[<e1ba4d03>] __nvsym00781+0x11b/0x190 [nvidia]
[<e1ba668c>] rm_init_adapter+0xc/0x10 [nvidia]
[<e1b8cee0>] nv_kern_open+0xf5/0x232 [nvidia]
[<c015d470>] chrdev_open+0xc0/0x1d0
[<c01b99ad>] devfs_open+0xed/0x110
[<c0152fd2>] dentry_open+0x112/0x180
[<c0152eb6>] filp_open+0x66/0x70
[<c01532c5>] sys_open+0x55/0x90
[<c010b4cb>] syscall_call+0x7/0xb
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
|
|
|
| Back to top |
|
|
infirit
l33t
Joined: 11 Jan 2003
Posts: 778
Location: Hoofddorp / The Netherlands
|
| Posted: Mon Dec 22, 2003 4:53 pm Post subject: |
|
|
It has been sugested on the web to upgrade the firmware and/or change a non branded cdrw to a branded one. It working fine for me with 2.6 final and Cdrecord-Clone 2.01a19
_________________
EASY TO INSTALL = Difficult to install, but instruction manual has pictures.
Join the adopt an unanswered post initiative today |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Mon Dec 22, 2003 6:22 pm Post subject: |
|
|
| Seems i posted it in the wrong part of the forum, oh well... |
|
| Back to top |
|
|
sj7trunks
Retired Dev
Joined: 10 Sep 2003
Posts: 6
Location: Silicon Valley
|
| Posted: Mon Dec 22, 2003 6:54 pm Post subject: Fix |
|
|
Try using --device=0,1,0
that works just fine for me in my 2.6 kernel |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Mon Dec 22, 2003 7:07 pm Post subject: |
|
|
| no that didnt change anything, specially since --device isnt a legal switch in cdrecord, so i changed it to --dev and that is the same as i had further up in this thread... |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Tue Dec 23, 2003 10:01 pm Post subject: |
|
|
Turns out the cdburner doesnt work as a reader either
| Code: | igor mnt # mount /dev/cdrom /mnt/cdrom/
mount: block device /dev/cdrom is write-protected, mounting read-only
mount: No medium found |
Same error, "no cd in inserted" BUT IT IS!
 |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Wed Dec 24, 2003 1:54 pm Post subject: |
|
|
| Same problem with 2.6.0-mm1 |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Wed Dec 24, 2003 11:04 pm Post subject: |
|
|
| The problem was not there in 2.6.0-test9........ |
|
| Back to top |
|
|
hielvc
Advocate
Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca
|
| Posted: Thu Dec 25, 2003 2:22 am Post subject: |
|
|
When I looked at my dmesg it said ide-scsi was depreciated and to use in lilo or grub hdc=ide-cd. To mount use /dev/hdc. Now it mounts and cdrecord dev=ATAPi:1,1,1 is recognized.
Output of dmesg:
| Code: |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Dec 23 19:08:48 tester kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 23 19:08:48 tester kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
Dec 23 19:08:48 tester kernel: VP_IDE: chipset revision 6
Dec 23 19:08:48 tester kernel: VP_IDE: not 100%% native mode: will probe irqs later
Dec 23 19:08:48 tester kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Dec 23 19:08:48 tester kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
Dec 23 19:08:48 tester kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
Dec 23 19:08:48 tester kernel: hda: HDS722580VLAT20, ATA DISK drive
Dec 23 19:08:48 tester kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 23 19:08:48 tester kernel: hdc: OPTORITE CD-RW CW4002, ATAPI CD/DVD-ROM drive
Dec 23 19:08:48 tester kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 23 19:08:48 tester kernel: hda: max request size: 1024KiB
Dec 23 19:08:48 tester kernel: hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
Dec 23 19:08:48 tester kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
Dec 23 19:08:48 tester kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
Dec 23 19:08:48 tester kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Dec 23 19:08:48 tester kernel: Vendor: OPTORITE Model: CD-RW CW4002 Rev: 100E
Dec 23 19:08:48 tester kernel: Type: CD-ROM ANSI SCSI revision: 02
Dec 23 19:08:48 tester kernel: sr0: scsi3-mmc drive: 4x/40x writer cd/rw xa/form2 cdda tray
Dec 23 19:08:48 tester kernel: Uniform CD-ROM driver Revision: 3.12
Dec 23 19:08:48 tester kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 |
hielvc |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Thu Dec 25, 2003 5:00 pm Post subject: |
|
|
| Tried passing ide-cd as an argument in lilo, didnt help! |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Thu Dec 25, 2003 5:02 pm Post subject: |
|
|
Looking in dmesg now i see:
during boot:
| Code: | /dev/ide/host0/bus1/target1/lun0: p1 p2 p3
cdrom: : unknown mrw mode page
hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0 |
later, probably when trying to mount the cd:
| Code: | end_request: I/O error, dev hdb, sector 0
cdrom: open failed.
end_request: I/O error, dev hdb, sector 0
cdrom: open failed.
|
|
|
| Back to top |
|
|
hielvc
Advocate
Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca
|
| Posted: Sat Dec 27, 2003 12:12 am Post subject: |
|
|
That error in your dmesg
| Quote: | Code: /dev/ide/host0/bus1/target1/lun0: p1 p2 p3
cdrom: : unknown mrw mode page
hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0
|
doesnt look good. My dmesg the right one this time | Code: |
hdc: OPTORITE CD-RW CW4002, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12 |
shows no errors. YOurs is acting like a hard drive. You have a flaky burner.
hielvc |
|
| Back to top |
|
|
CrimsonScythe
Tux's lil' helper
Joined: 25 Sep 2002
Posts: 83
Location: Minneapolis, MN
|
| Posted: Sat Dec 27, 2003 1:08 pm Post subject: |
|
|
I think this is a kernel-issue. I had ATAPI burning working just fine under 2.6.0-test11, but it broke when I installed 2.6.0-mm1. Now I have the same error mesages as you in dmesg:
| Code: | cdrom: : unknown mrw mode page
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0 |
Lets hope this will get fixed soon.
_________________
If we weren't supposed to eat animals, then why are they made of meat? |
|
| Back to top |
|
|
hielvc
Advocate
Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca
|
| Posted: Mon Dec 29, 2003 3:53 pm Post subject: |
|
|
This just a thought but do you have UDF,packet writing, enabled ? Thats File systems>> CD-ROM/DVD Filesystems >> UDF file system support, if so try without it.
hielvc |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Mon Dec 29, 2003 4:22 pm Post subject: |
|
|
| CrimsonScythe wrote: | I think this is a kernel-issue. I had ATAPI burning working just fine under 2.6.0-test11, but it broke when I installed 2.6.0-mm1. Now I have the same error mesages as you in dmesg:
| Code: | cdrom: : unknown mrw mode page
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0 |
Lets hope this will get fixed soon. |
SAME FOR ME!
It worked great in test9, but is now broken....
I`ll try to recompile it without UDP tomorrow.... |
|
| Back to top |
|
|
tgnb
Apprentice
Joined: 16 Apr 2002
Posts: 208
Location: New York, NY
|
| Posted: Tue Dec 30, 2003 2:56 am Post subject: |
|
|
| Same problem vanilla 2.6.0 .. disabling UDF filesuystem support didn't help me. |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Tue Dec 30, 2003 11:56 am Post subject: |
|
|
| tgnb wrote: | | Same problem vanilla 2.6.0 .. disabling UDF filesuystem support didn't help me. |
I heard it was a known problem.... |
|
| Back to top |
|
|
mariux2
Apprentice
Joined: 16 Sep 2003
Posts: 242
|
| Posted: Wed Dec 31, 2003 1:39 am Post subject: |
|
|
| Its not fixed in 2.6.0-mm2 either |
|
| Back to top |
|
|
camresu
Tux's lil' helper
Joined: 09 Nov 2003
Posts: 93
|
| Posted: Wed Dec 31, 2003 6:19 pm Post subject: |
|
|
| mariux2 wrote: | | CrimsonScythe wrote: | I think this is a kernel-issue. I had ATAPI burning working just fine under 2.6.0-test11, but it broke when I installed 2.6.0-mm1. Now I have the same error mesages as you in dmesg:
| Code: | cdrom: : unknown mrw mode page
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0 |
Lets hope this will get fixed soon. |
SAME FOR ME!
|
Same for me what gives with end_request: I/O error, ???
using gentoo-dev-sources-2.6.0
_________________
---I used to use a mac -- now macs use Linux - I am backwards --
---- cam resu ___ mac user --- camresu ___ |
|
| Back to top |
|
|
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Thu Jan 01, 2004 8:54 pm Post subject: Same for me |
|
|
I am experiencing this problem with mm-sources 2.6.0 and ATAPI burning on one system with a Mitsumi cd Burner, but I am NOT experiencing this problem on a cloned system (same kernel) with a LiteOn burner. I want to try just swaping burners and seeing how that works. I'll let everyone know what I find....gonna be a couple days until I can try it
Just so you know, both burners work fine with SCSI emulation and an older kernel. But who wants to use that?????
Last edited by HeadHolio on Fri Jan 02, 2004 1:11 am; edited 1 time in total |
|
| Back to top |
|
|
ozukir@
Apprentice
Joined: 14 Oct 2002
Posts: 209
Location: USA
|
| Posted: Thu Jan 01, 2004 11:57 pm Post subject: 2.6.0-mm2 |
|
|
D@mmit!
| Code: | hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdc, sector 0
cdrom: : unknown mrw mode page
hdd: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
end_request: I/O error, dev hdd, sector 0 |
But I can mount and read disks fine (with occassional hiccup in the logs). |
|
| Back to top |
|
|
HeadHolio
Guru
Joined: 10 Aug 2002
Posts: 445
|
| Posted: Fri Jan 02, 2004 1:10 am Post subject: Yeah me too |
|
|
| I can also mount and read disks fine. |
|
| Back to top |
|
|
ozukir@
Apprentice
Joined: 14 Oct 2002
Posts: 209
Location: USA
|
| Posted: Fri Jan 02, 2004 9:02 am Post subject: |
|
|
So far I can report success with gentoo-dev-sources-2.6.0-r1. Relevant dmesg output: | Code: | hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA |
| Code: | > cdrecord dev=ATAPI -scanbus
Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 J�rg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'HL-DT-ST' 'CD-RW GCE-8240B ' '1.07' Removable CD-ROM
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,1,0 1) 'Compaq ' 'DVD-ROM DVD-113R' '1.10' Removable CD-ROM
<snip>
|
Doing the deed: | Code: | | > cdrecord dev=ATAPI:0,0,0 driveropts=burnfree -dao cuefile=videocd.cue |
is successful.
I simply emerged the masked gentoo-dev-sources, ran make oldconfig on my config from mm2, and removed all scsi options (except for CONFIG_SCSI=m which cannot be removed). I don't know how the patchsets differ, but it works for me. |
|
| Back to top |
|
|
georgie
n00b
Joined: 03 Jan 2003
Posts: 42
Location: London, UK
|
| Posted: Fri Jan 02, 2004 9:12 am Post subject: I used dev=/dev/hd* |
|
|
Dunno if this uses ATAPI or not, but after moving to kernel 2.6, I had to start passing the dev=/dev/hdd* switch to cdrecord in order to get it to work.,
hth
george
*hdd being where my cd-burner is, obviously |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
