| View previous topic :: View next topic |
| Author |
Message |
kKDu
Apprentice
Joined: 18 Aug 2003
Posts: 187
|
 Posted: Mon Dec 22, 2003 4:01 pm Post subject: verzerrtes Bild unter X |
 |
|
Ich richte gerade einen Computer zu Weihnachten für meinen Bruder her, natürlich kommt da Gentoo rauf 
Ich habe eine ATI Radeon 9200, läuft auch alles perfekt mit den ati-drivers.
Tux-Racer und fgl_glxgears funktioniert.
Nur das normale Bild unter X ist schlecht, es hat rechts neben Fenstern und Text immer ein paar Schatten der selben (wie ein schlechtes Fernsehbild). Außerdem verzerrt sich das gesamte Bild ein wenig, wenn ich ein Fenster über den Desktop bewege oder eins neu starte.
Dachte zuerst, es sei ein Problem der ATI Treiber, habe dann X nur mit VESA gestartet, keine sichtbare Änderung.
Bin mitlerweile ziemlich ratlos und hoffe auf Rat.
| Code: | # File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/mouse"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 60.0
VertRefresh 60 - 75
Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Vesa"
VendorName "Unknown"
BoardName "Unknown"
Driver "vesa"
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "PAL-G"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "6"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5964
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0"
#Device "ATI Graphics Adapter"
Device "Vesa"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
|
|
|
| Back to top |
|
 |
UTgamer
Veteran
Joined: 10 Aug 2003
Posts: 1326
Location: Troisdorf (Köln) Deutschland
|
| Posted: Mon Dec 22, 2003 8:28 pm Post subject: |
|
|
Es wäre besser gewesen du hättest die Monitordaten hier mit angegeben.
Wie: 15,17,19,20,21" Zoll etc.
sowie auch die Frequenzdaten und das Alter des Monitors.
Dies ist meine Einstellung für einen 17" oder 19" Röhrenmonitor der die 1280 * 1024 mit 85Hz kann. also nur übernehmen, wenn dein Monitor auch dieses Frequenzspectrum anbietet.
| Code: |
Section "Screen"
DisplaySize 360 270
HorizSync 31-91
Identifier "Screen0"
ModelName "1280X1024@85HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-85
UseModes "Modes[0]"
ModeLine "1152x864/84Hz" 135 1152 1464 1592 1776 864 864 876 908 +HSync +VSync
ModeLine "1280x1024/85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
EndSection
|
Was ich also vermisse sind die Frequenzangaben für Horizontal und Vertikal bei deiner Konfigurationsdatei. Unter Grafikkarte hast du viele ATI speziefische Angaben, und ich vermute das die meisten hier wie ich, eine NVIDIA haben. Ich kenne deine Fehlererscheinung von älteren XServern her, nachdem ich XF86Conf von Hand ausgeführt hatte, hatte ich die Monitorangaben.
Ich empfehle also deine jetzige Konfig zu sichern und eine neue anzulegen mit dem "öden" Konfigtool, um dann die Monitordaten in die gesicherte Datei zu übertragen. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
