View previous topic :: View next topic |
Author |
Message |
alshain Apprentice
Joined: 02 Aug 2002 Posts: 202 Location: London, UK
|
Posted: Wed Jan 14, 2004 9:52 am Post subject: mounting cdrom using the latest love-sources |
|
|
Hello,
I'm using 2.6.1-love3 and it's very nice, but now I can't mount cdroms or dvds in either hdc (my dvd-writer) or hdd (ordinary dvd-rom). I keep getting the following message:
mount -t auto /dev/cdrom /mnt/cdrom
mount: block device /dev/cdrom is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
This happens when I set the type to iso9660 too and also doing just a plain mount /mnt/cdrom which has always worked before. My fstab file is unchanged from using vanilla 2.6.1 which works fine and the kernel config is also unchanged (although I did go through it and check to see if anything needed adding for love-sources). I'm not using supermount.
Doing a dmesg reveals a whole load of these messages for both hdc and hdd:
ide-cd: cmd 0x28 timed out
hdd: DMA timeout retry
hdd: timeout waiting for DMA
hdd: status timeout: status=0xd0 { Busy }
hdd: status timeout: error=0x40LastFailedSense 0x04
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x54
end_request: I/O error, dev hdd, sector 4293630384
Buffer I/O error on device hdd, logical block 8
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x54
end_request: I/O error, dev hdd, sector 4293630400
The cds I'm using work fine in Windows. Anyone got any ideas?
Andrew |
|
Back to top |
|
|
Kirschsaft n00b
Joined: 05 Jul 2003 Posts: 22
|
Posted: Wed Jan 14, 2004 11:27 am Post subject: |
|
|
Hi,
I'm having the same problem here after updating from 2.6.1-rc1-love1.
My dmesg output is a bit different though.
Code: |
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: DMA disabled
hdd: ide_intr: huh? expected NULL handler on exit
hdd: ATAPI reset complete
cdrom: hdd: mrw address space DMA selected
Unable to identify CD-ROM format. | I also don't use supermount. The inserted cd works fine with rc1-love1. |
|
Back to top |
|
|
alshain Apprentice
Joined: 02 Aug 2002 Posts: 202 Location: London, UK
|
Posted: Wed Jan 14, 2004 11:59 am Post subject: |
|
|
Kirschsaft wrote: | Hi,
I'm having the same problem here after updating from 2.6.1-rc1-love1.
My dmesg output is a bit different though.
Code: |
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdd: cdrom_decode_status: error=0x40LastFailedSense 0x04
hdd: DMA disabled
hdd: ide_intr: huh? expected NULL handler on exit
hdd: ATAPI reset complete
cdrom: hdd: mrw address space DMA selected
Unable to identify CD-ROM format. | I also don't use supermount. The inserted cd works fine with rc1-love1. |
Glad to know it's not just me. Wierdly I managed to successfully write a DVD in this condition. I just can't read it afterwards (under Linux)!
Andrew |
|
Back to top |
|
|
hotwok n00b
Joined: 13 Jan 2004 Posts: 48 Location: Sweden
|
Posted: Fri Jan 16, 2004 6:24 pm Post subject: |
|
|
i second that, no dvd/cdrom :/ |
|
Back to top |
|
|
Wedge_ Advocate
Joined: 08 Aug 2002 Posts: 3614 Location: Scotland
|
Posted: Fri Jan 16, 2004 6:31 pm Post subject: |
|
|
This no longer happens in -love5 _________________ Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
Back to top |
|
|
|