How I got k3b working with just ATAPI (no ide-scsi, 2.6.x).

Strukt · n00b Joined: 11 Oct 2002 Posts: 56

I just want to place my thanks to the thread-creator, what you wrote in this thread helped me get my DVD burning working with the 2.6.3-r1 kernel using KDE windowmanager and ofcourse Gentoo as the base system.

Thanks

Some info about my system.
AMD XP CPU at 2100Mhz (yes, mhz..)
Nforce 2-based mobo
SIL3112 SATA controller (amazingly got it to work with my raptor drive)
512MB DDR Dual Channel
NEC 1300A DVD Writer

Thanks again

rtwick · Posted: Fri Mar 05, 2004 3:09 pm Post subject:

bumping to try it later
_________________
-This Is A Signature

calhoun · Posted: Sat Mar 06, 2004 7:41 pm Post subject:

cptmorgan · Posted: Tue Nov 09, 2004 10:57 pm Post subject:

Well the reason I tried this out was that before I upgraded to 2.6 kernel I could burn cds fine and it would fly. Now with 2.6 kernel the buffer stays way low and jumps around and burns at avg 10x even without atapi. This is ridiculous and Ive tried everything, even this guide. Everything still works but my system bogs down and it burns way slow.... anyone have any ideas ?

Shan · Guru Joined: 04 Nov 2003 Posts: 558 Location: /dev/null

NOTE: I found that I had to use "dev=ATAPI:0,1,0" for my CDRecord options in K3b, not the suggested --device=ATAPI:0,1,0 (adjusting to the proper dev numbers of course).

Other than that, your guide worked great, and I didn't have to do any extra configuration to get DVD's to burn either (outside of having dvd+rw-tools installed)
_________________
{ NO -U } { STRIP }
{ TINY }

farceb · n00b Joined: 11 May 2005 Posts: 4

If something fails, you can check out this link http://gentoo-wiki.com/HOWTO_ATAPI_CD_Burning, it was usefull to me.