| View previous topic :: View next topic |
| Author |
Message |
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
 Posted: Fri Jan 23, 2004 11:44 am Post subject: problemi con il mouse...[Risolto] |
 |
|
salve a tutti! sono alla mia prima installazione di gentoo!
con molta calma sono partito dallo stage1 compilando tutto il possibile... una volta pronto ho compilato XFree e Fluxbox e tutto andava per il meglio! a questo punto ho deciso di installare kde...
e qui hanno iniziato a crearsi i problemi... sono riuscito a compialre tutto fino alle kdelibs a quel punto non sono piu riuscito a far niente perche si bloccava in compilazione... beh ho scoperto di aver fuso la scheda madre 
a questo punto ho dovuto comprare una nuova scheda, l'ho montata e tutto bene... sono riuscito a compilare kdelibs e kdebase e ora kde parte
MA si è creato un nuovo problema! (a parte l'audio che non va ma a quello pensoro dopo)
il mouse stranamente non va! il fatto è che non è che non vada sulla scheda perchè in windows funziona tranquillamente ma in Linux sembra non muoversi...
ho provato a cercarlo su tutti i dev ma niente (/dev/psaux /dev/input/mice /dev/mouse) ma su nessuno va! (ah il mouse è un TrackMan Marble della Logitech su porta PS/2 ed è sempre andato bene con Linux)
a questo punto ho pensato ad alcune possibili cause...
1-il cambio di scheda madre ma non avrebbe alcuna ragione di essere cosi
2-il fatto che prima di iniziare a compilare kde ho fatto l'emerge del 2.6.1 dei sorgenti di gentoo mentre prima utilizzavo quelli di www.kernel.org
3-bohhhh
secondo voi cosa può essere?!? vi è mai capitato nulla disimile?
Last edited by il_guru on Sun Jan 25, 2004 9:52 am; edited 1 time in total |
|
| Back to top |
|
 |
micron
Guru
Joined: 23 Jul 2003
Posts: 411
Location: Bergamo, Italy
|
| Posted: Fri Jan 23, 2004 11:52 am Post subject: |
|
|
Sei sicuro d'avere abilitato il supporto al mouse su PS/2 sotto:
| Code: | Device Drivers --->
Input device support --->
[*] Mice--> PS/2 |
_________________
~ "Progress is merely a realisation of utopias" ~ |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Fri Jan 23, 2004 1:13 pm Post subject: |
|
|
| si si l'ho fatto |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Fri Jan 23, 2004 1:23 pm Post subject: |
|
|
| A me succede con i kernel 2.6.. tre o quattro click sul bottone sinistro e il mouse riparte. |
|
| Back to top |
|
|
micron
Guru
Joined: 23 Jul 2003
Posts: 411
Location: Bergamo, Italy
|
| Posted: Fri Jan 23, 2004 1:42 pm Post subject: |
|
|
Non vorrei dire una cavolata, ma sei sicuro d'avere attivato il supporto a devfs? Potrebbe essere questa la vera causa del problema...
Io sto usando il 2.6..1 e non ho alcun problema con il mouse (ne con le altre periferiche)
_________________
~ "Progress is merely a realisation of utopias" ~ |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Fri Jan 23, 2004 2:32 pm Post subject: |
|
|
no, non è neanche quello... il devfs l'ho attivato
non riesco proprio a capire cosa gli possa dare fastidio |
|
| Back to top |
|
|
so
Retired Dev
Joined: 08 Sep 2003
Posts: 115
Location: Roma
|
| Posted: Fri Jan 23, 2004 5:12 pm Post subject: |
|
|
posta il tuo
un saluto a tutti |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Fri Jan 23, 2004 7:35 pm Post subject: |
|
|
CPU0
0: 172621 XT-PIC timer
1: 362 XT-PIC i8042
2: 0 XT-PIC cascade
8: 2 XT-PIC rtc
9: 0 XT-PIC acpi
10: 1381 XT-PIC SiS SI7012
14: 9370 XT-PIC ide0
15: 9 XT-PIC ide1
NMI: 0
ERR: 3 |
|
| Back to top |
|
|
so
Retired Dev
Joined: 08 Sep 2003
Posts: 115
Location: Roma
|
| Posted: Sat Jan 24, 2004 12:29 am Post subject: |
|
|
Vedo che hai il chipset SiS
ci dovrebbe essere un bug sull'hardware nel disabilitare la porta AUX
posta anche il dmesg e vediamo se è lo stesso errore che ho avuto
un saluto a tutti |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Sat Jan 24, 2004 11:04 am Post subject: |
|
|
| ok appena posso posto pure quello.... solo una domanda nel frattempo... l'hai risolto? |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Sat Jan 24, 2004 12:05 pm Post subject: |
|
|
| Code: |
Linux version 2.6.1 (root@cdimage) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #5 Sat Jan 24 00:08:50 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 00000000000ea000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa1d0
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff00c0
ACPI: DSDT (v001 SiS 740 0x00000100 MSFT 0x0100000d) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=LinuxOLD ro root=c7 reboot=warm root=/dev/ide/host0/bus0/target0/lun0/part7
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1400.484 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 514456k/524224k available (2507k kernel code, 9020k reserved, 953k data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2768.89 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
ACPI: Processor [CPU1] (supports C1)
Console: switching to colour frame buffer device 80x30
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 746 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd0000000
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
8139cp: pci dev 0000:00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe085df00, 00:10:a7:13:ac:9b, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: QUANTUM FIREBALL ST3.2A, ATA DISK drive
hdc: SAMSUNG CD-R/RW SW-240B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
hdb: max request size: 128KiB
hdb: 6306048 sectors (3228 MB) w/81KiB Cache, CHS=6256/16/63
/dev/ide/host0/bus0/target1/lun0: p1 p2
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
Console: switching to colour frame buffer device 80x30
mice: PS/2 mouse device common for all mice
input: PC Speaker
pnp: the driver 'ns558' has been registered
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
i2c /dev entries driver
i2c-sis96x version 1.0.0
sis96x smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
intel8x0: clocking to 48000
ALSA device list:
#0: SiS SI7012 at 0xdc00, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 253976k swap on /dev/hdb1. Priority:-1 extents:1
EXT3 FS on hda7, internal journal
spurious 8259A interrupt: IRQ7.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
|
ecco il dmesg |
|
| Back to top |
|
|
so
Retired Dev
Joined: 08 Sep 2003
Posts: 115
Location: Roma
|
| Posted: Sat Jan 24, 2004 12:05 pm Post subject: |
|
|
certo
ho addirittura chiesto aiuto a Andrew Morton, Vojtech Pavlik, Dmitry Torokhov e Peter Osterlund
che sono il mantenitore del kernel 2.6 e i curatori dei supporti per il mouse
tutto sta è capire se il problema è lo stesso |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Sat Jan 24, 2004 12:07 pm Post subject: |
|
|
abbiamo postato insieme 
aspetto la tua diagnosi |
|
| Back to top |
|
|
so
Retired Dev
Joined: 08 Sep 2003
Posts: 115
Location: Roma
|
| Posted: Sat Jan 24, 2004 12:50 pm Post subject: |
|
|
Il problema l'ho risolto così
vai su /usr/src/linux-2.6.x/drivers/input/serio
e modifica il file i8042.c
togli a questo file le righe
| Code: |
if (i8042_command(¶m, I8042_CMD_AUX_DISABLE))
> return -1;
> if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS))
> return -1;
|
salva il nuovo file
ricompila il kernel con queste modifiche
e speriamo bene |
|
| Back to top |
|
|
il_guru
Tux's lil' helper
Joined: 23 Jan 2004
Posts: 83
|
| Posted: Sun Jan 25, 2004 9:53 am Post subject: |
|
|
| grazie mille!!!! ora funziona alla perfezione!!!!!! |
|
| Back to top |
|
|
|
Forum italiano (Italian)
