problem installing driver for Conexant Hsf winmodem

[Berkz]

I'm using the gentoo modified kernel and when i try to install the driver for my winmodem i get an error. I tried scanning the forums for this kinda stuff but found nothing so i posted this. Anybody know of a solution. I'm gonna try the normal kernel tonight and see if that's the problem.

this is the output from dmesg
Linux version 2.4.19-gentoo-r5 (root@enterprise.pcnet.is) (gcc version 2.95.3

20010315 (release)) #3 Tue Aug 27 14:59:02 GMT 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
> BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
> BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 319MB LOWMEM available.
> On node 0 totalpages: 81904
> zone(0): 4096 pages.
> zone(1): 77808 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/hda4
> Initializing CPU#0
> Detected 701.759 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1389.72 BogoMIPS
> Memory: 320572k/327616k available (1550k kernel code, 6656k reserved, 478k

data, 236k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 128K
> CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
> CPU: Common caps: 0383f9ff 00000000 00000000 00000000
> CPU: Intel Celeron (Coppermine) stepping 06
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
> Limiting direct PCI/PCI transfers.
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Journalled Block Device driver loaded
> devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x1
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> NTFS driver v1.1.22 [Flags: R/W]
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI

ISAPNP enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 608 slots per queue, batch=152
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
> hda: SAMSUNG SV1022D, ATA DISK drive
> hdb: CD-ROM 56X L, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: 19931184 sectors (10205 MB) w/472KiB Cache, CHS=1240/255/63, UDMA(33)
> hdb: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> PPP generic driver version 2.4.2
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 262M
> agpgart: Detected Intel 440BX chipset
> agpgart: AGP aperture is 32M @ 0xd0000000
> [drm] Initialized tdfx 1.0.0 20010216 on minor 0
> [drm] AGP 0.99 on Intel 440BX @ 0xd0000000 32MB
> [drm] Initialized radeon 1.1.1 20010405 on minor 1
> SCSI subsystem driver Revision: 1.00
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
> es1371: version v0.30 time 15:02:21 Aug 27 2002
> PCI: Found IRQ 5 for device 00:0b.0
> es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
> es1371: found es1371 rev 2 at io 0xe800 irq 5
> es1371: features: joystick 0x0
> ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
> Linux Kernel Card Services 3.1.22
> options: [pci] [cardbus]
> usb.c: registered new driver hub
> uhci.c: USB Universal Host Controller Interface driver v1.1
> PCI: Found IRQ 10 for device 00:07.2
> uhci.c: USB UHCI at I/O 0xe000, IRQ 10
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> ds: no socket drivers loaded!
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Mounted devfs on /dev
> Freeing unused kernel memory: 236k freed
> Adding Swap: 401616k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
> divide error: 0000
> CPU: 0
> EIP: 0010:[<d48469a0>] Tainted: P
> EFLAGS: 00010246
> eax: 00000064 ebx: d492af94 ecx: 00000064 edx: 00000000
> esi: d492af7c edi: 00000000 ebp: d329bdac esp: d329bd94
> ds: 0018 es: 0018 ss: 0018
> Process modprobe (pid: 2201, stackpage=d329b000)
> Stack: d492a1e4 00000000 d492a210 d492a1e4 d345cc40 d492a1e4 d329be0c d484eb5d
> 00000000 000003e8 d484f240 d484f130 d484f160 d492a1e4 d329be2c d484d811
> d345c940 00000003 00000001 00000080 d484f240 d484f260 d484f280 000ff08c
> Call Trace: [<d484eb5d>] [<d484f240>] [<d484f130>] [<d484f160>] [<d484d811>]
> [<d484f240>] [<d484f260>] [<d484f280>] [<d4927fc0>] [<d48608e8>]

[<d4927f40>]
> [<d4924b99>] [<d48707b2>] [<d4924600>] [<d4927f40>] [<d4924be5>]

[<d4927f40>]
> [<d4927f40>] [<d48606dd>] [<d49271c1>] [<d4927f40>] [<d4928040>]

[<d4928080>]
> [<d4927467>] [<d4927fc0>] [<d4928100>] [<d4924cdd>] [<d4927fc0>]

[<d4924cc0>]
> [<c012ea13>] [<c0115ead>] [<d4924060>] [<c010871b>]
>
> Code: f7 f7 c7 43 04 00 00 00 00 c7 46 18 00 00 00 00 c7 46 28 a8
> <3>modprobe[2201] exited with preempt_count 1

[gfunkmonk]

Its a problem with pre-emptive kernel patch, wich is included in the gentoo-sources

[Guest]

i recompiled the kernel where i disabled that thing