| View previous topic :: View next topic |
| Author |
Message |
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
 Posted: Mon Sep 02, 2002 8:50 pm Post subject: no sound, i8xx, on board, integrated, i815, i810, ICH |
 |
|
Hi dear all,
here is the problem... dunno what to do with it...
| Code: |
Intel 810 + AC97 Audio, version 0.21, 22:57:46 Sep 2 2002
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xef00 and 0xe800, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
gfdsa dev # cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 2).
Prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 2).
Master Capable. Latency=32. Min Gnt=8.
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 2).
Master Capable. No bursts. Min Gnt=2.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801BA IDE U100 (rev 2).
I/O at 0xffa0 [0xffaf].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 2).
IRQ 11.
I/O at 0xef40 [0xef5f].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82801BA/BAM SMBus (rev 2).
IRQ 9.
I/O at 0xefa0 [0xefaf].
Bus 0, device 31, function 4:
USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 2).
IRQ 10.
I/O at 0xef80 [0xef9f].
Bus 0, device 31, function 5:
Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 2).
IRQ 9.
I/O at 0xe800 [0xe8ff].
I/O at 0xef00 [0xef3f].
Bus 2, device 0, function 0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
IRQ 11.
Non-prefetchable 32 bit memory at 0xfc000000 [0xfdffffff].
Prefetchable 32 bit memory at 0xf0000000 [0xf1ffffff].
I/O at 0xd800 [0xd8ff].
Bus 1, device 10, function 0:
SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 1).
IRQ 6.
Master Capable. Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0xc800 [0xc8ff].
Non-prefetchable 32 bit memory at 0xfa9ff000 [0xfa9fffff].
Bus 1, device 13, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 65).
IRQ 11.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xcc00 [0xcc7f].
Non-prefetchable 32 bit memory at 0xfa9fec00 [0xfa9fefff].
gfdsa dev # cat /proc/dma
4: cascade
gfdsa dev # cat /proc/irq/
cat: /proc/irq/: Is a directory
gfdsa dev # cat /proc/interrupts
CPU0
0: 1974615 XT-PIC timer
1: 3131 XT-PIC keyboard
2: 0 XT-PIC cascade
6: 10283 XT-PIC aic7xxx
8: 2 XT-PIC rtc
9: 7421 XT-PIC Intel ICH2
10: 0 XT-PIC usb-uhci
11: 1412 XT-PIC usb-uhci, eth0
12: 52892 XT-PIC PS/2 Mouse
14: 16 XT-PIC ide0
15: 21809 XT-PIC ide1
NMI: 0
ERR: 0
gfdsa dev # cat /proc/irq/
0 10 12 14 2 4 6 8 prof_cpu_mask
1 11 13 15 3 5 7 9
gfdsa dev # ls /proc/irq/9
gfdsa dev # ls -la /proc/irq/9
total 0
dr-xr-xr-x 2 root root 0 Sep 2 23:51 .
dr-xr-xr-x 18 root root 0 Sep 2 23:51 ..
gfdsa dev #
|
looks great, but i cant make it sound...
no errors from programs, but mpg123 play mp3s very fast, cat smthng>/dev/dsp stucks....
any clues?
Thank you in advance
P.S. tried as both modules and not... devfs? |
|
| Back to top |
|
 |
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Tue Sep 03, 2002 6:35 pm Post subject: |
|
|
 |
|
| Back to top |
|
|
pilla
Bodhisattva
Joined: 07 Aug 2002
Posts: 7731
Location: Underworld
|
| Posted: Tue Sep 03, 2002 7:45 pm Post subject: |
|
|
Have you tested it as root or a regular users? Regular users (and also root) must be in "audio" group.
What about your /etc/devsfd.conf? |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Tue Sep 03, 2002 9:38 pm Post subject: |
|
|
here is relevant section of defsd.conf:
| Code: |
LOOKUP snd MODLOAD ACTION snd
LOOKUP dsp MODLOAD
LOOKUP mixer MODLOAD
LOOKUP midi MODLOAD
REGISTER sound/.* PERMISSIONS root.audio 660
REGISTER snd/.* PERMISSIONS root.audio 660
|
and imho its not permissions:
| Code: |
ls -l /dev/sound/
total 0
crw-rw---- 1 root audio 14, 3 Jan 1 1970 dsp
crw-rw---- 1 root audio 14, 0 Jan 1 1970 mixer
|
i tried to cat things to /dev/sound/dsp, usually it results in sound, in my case it stucks...
my user is in audio group, root as i see does not have to be |
|
| Back to top |
|
|
pilla
Bodhisattva
Joined: 07 Aug 2002
Posts: 7731
Location: Underworld
|
| Posted: Tue Sep 03, 2002 10:20 pm Post subject: |
|
|
Looks OK. Are you using some Desktop Manager which has a sound server (like artsd in KDE or esd in Gnome)?
| gfdsa wrote: | here is relevant section of defsd.conf:
| Code: |
LOOKUP snd MODLOAD ACTION snd
LOOKUP dsp MODLOAD
LOOKUP mixer MODLOAD
LOOKUP midi MODLOAD
REGISTER sound/.* PERMISSIONS root.audio 660
REGISTER snd/.* PERMISSIONS root.audio 660
|
and imho its not permissions:
| Code: |
ls -l /dev/sound/
total 0
crw-rw---- 1 root audio 14, 3 Jan 1 1970 dsp
crw-rw---- 1 root audio 14, 0 Jan 1 1970 mixer
|
i tried to cat things to /dev/sound/dsp, usually it results in sound, in my case it stucks...
my user is in audio group, root as i see does not have to be |
|
|
| Back to top |
|
|
fidler
Apprentice
Joined: 03 Jul 2002
Posts: 162
Location: Utah
|
| Posted: Tue Sep 03, 2002 11:10 pm Post subject: |
|
|
Did you make sure your sound card was unmuted??? That is the first place I would check.
Check the Desktop documentation on how to do this. |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 4:39 am Post subject: |
|
|
yes. i use artsd, it does not work, i use cat sometext >/dev/sound/dsp - does not work either....
Should i look into Desktop docs if it does not work in console?
im seriosly going crazy on it.. ecompiled kernel 14 times....
alsa-driver recompiled from portage twice, last tarball from alsa project fails to compile, and portage's one segmentationsfaults after compiling.
Im doomed, what do i need this pice of iron for, if it doesnt play music???
|
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 4:45 am Post subject: |
|
|
| looks to you i should subscribe to kernel mailing list and ask there? |
|
| Back to top |
|
|
masseya
Bodhisattva
Joined: 17 Apr 2002
Posts: 2602
Location: Baltimore, MD
|
| Posted: Wed Sep 04, 2002 6:47 am Post subject: |
|
|
I have an intel i810 working very well with alsa. Is there a reason that you don't want to use alsa?
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am.. |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 6:51 am Post subject: |
|
|
| Tristam29 wrote: | | I have an intel i810 working very well with alsa. Is there a reason that you don't want to use alsa? |
| gfdsa wrote: |
alsa-driver recompiled from portage twice, last tarball from alsa project fails to compile, and portage's one segmentationsfaults after compiling.
|
|
|
| Back to top |
|
|
masseya
Bodhisattva
Joined: 17 Apr 2002
Posts: 2602
Location: Baltimore, MD
|
| Posted: Wed Sep 04, 2002 7:08 am Post subject: |
|
|
Heh, didn't see that.  Guess it's about time to go to sleep.
Have you tried masking the newer version of alsa to see if the older one still works? Just add a line to /usr/portage/profiles/package.mask and then try emerging it.
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am.. |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 8:29 am Post subject: |
|
|
Thanks
ill try asap, but im pretty sure im missing somthing on a lower level.... smthng with devfs or kernel.... irq's or smthing |
|
| Back to top |
|
|
pilla
Bodhisattva
Joined: 07 Aug 2002
Posts: 7731
Location: Underworld
|
| Posted: Wed Sep 04, 2002 12:55 pm Post subject: |
|
|
The point about artsd --- are you sure you aren't using artsd at the same time you try to cat to /etc/dsp?
Dumb question, but somedody should ask...
My sound is also a i810. I'm running 2.4.19-r8. I was looking at your dmesg output and I found that you don't have something like my second line. Are you share you have everything correctly compiled into your kernel? Like ICH sound, irq sharing (don't remember if you need a special option for it) et al?
| Code: |
Intel 810 + AC97 Audio, version 0.21, 14:57:18 Aug 30 2002
PCI: Enabling device 00:1f.5 (0000 -> 0001)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 02:00.1
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x18c0 and 0x1c00, IRQ 11
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4352:0x5936 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
|
| gfdsa wrote: | Thanks
ill try asap, but im pretty sure im missing somthing on a lower level.... smthng with devfs or kernel.... irq's or smthing |
|
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 1:06 pm Post subject: |
|
|
i didnt start X when i checked, so artsd is out of the game, anyway even if it was running i shoul get "device busy" or like that...
Thats the question.. about the kernel, im not shure about it, but ill check about sharing irq's, ill check, ich i dont remember config remining it at all
not at home now... |
|
| Back to top |
|
|
pilla
Bodhisattva
Joined: 07 Aug 2002
Posts: 7731
Location: Underworld
|
| Posted: Wed Sep 04, 2002 2:03 pm Post subject: |
|
|
I think you should look for these in .config file
| Code: |
CONFIG_IDEPCI_SHARE_IRQ=y
....
CONFIG_SOUND_ICH=y
|
| gfdsa wrote: | i didnt start X when i checked, so artsd is out of the game, anyway even if it was running i shoul get "device busy" or like that...
Thats the question.. about the kernel, im not shure about it, but ill check about sharing irq's, ill check, ich i dont remember config remining it at all
not at home now... |
|
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Wed Sep 04, 2002 3:32 pm Post subject: |
|
|
| Code: |
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_SOUND=m
CONFIG_SOUND_ICH=m
|
IMHO CONFIG_IDEPCI_SHARE_IRQ=y goes for IDE |
|
| Back to top |
|
|
masseya
Bodhisattva
Joined: 17 Apr 2002
Posts: 2602
Location: Baltimore, MD
|
| Posted: Wed Sep 04, 2002 9:25 pm Post subject: |
|
|
I take it that masking the latest version of alsa didn't work?
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am.. |
|
| Back to top |
|
|
pilla
Bodhisattva
Joined: 07 Aug 2002
Posts: 7731
Location: Underworld
|
| Posted: Wed Sep 04, 2002 9:35 pm Post subject: |
|
|
I think so... I was in a hurry
| gfdsa wrote: | | Code: |
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_SOUND=m
CONFIG_SOUND_ICH=m
|
IMHO CONFIG_IDEPCI_SHARE_IRQ=y goes for IDE |
|
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Thu Sep 05, 2002 2:54 pm Post subject: |
|
|
| didnt try alsa yet, and im almost sure that its irq sharing issue, tried to play with it in bios, nothing, compiled kernel without usb which is shared with ICH, but Pkernel's PCI still reports about sharing and sound does not work... |
|
| Back to top |
|
|
fidler
Apprentice
Joined: 03 Jul 2002
Posts: 162
Location: Utah
|
| Posted: Thu Sep 05, 2002 5:11 pm Post subject: |
|
|
You may have to enable ACPI depending on how new your computer is.
With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card. |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Thu Sep 05, 2002 5:28 pm Post subject: |
|
|
| fidler wrote: | You may have to enable ACPI depending on how new your computer is.
With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card. |
This one makes sense!!!
I didnt enable it, not that i know what good in this feature, but i'll try it today, btw, can you drop me your .config to gfdsa at gfdsa dot org? I'll be very oblige to you. |
|
| Back to top |
|
|
fidler
Apprentice
Joined: 03 Jul 2002
Posts: 162
Location: Utah
|
| Posted: Thu Sep 05, 2002 6:43 pm Post subject: |
|
|
| gfdsa wrote: | | fidler wrote: | You may have to enable ACPI depending on how new your computer is.
With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card. |
This one makes sense!!!
I didnt enable it, not that i know what good in this feature, but i'll try it today, btw, can you drop me your .config to gfdsa at gfdsa dot org? I'll be very oblige to you. |
Well, the good is that it allows your sound card to work  And that it manages power, and events that occur on your computer.
By the way if the mp3s play *real* fast it may be that your plugin is for diskwriter, which writes the mp3s to wav files. |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Thu Sep 05, 2002 7:28 pm Post subject: |
|
|
mmmmm
i dont think
diskwrites anything, only swap may be affected  [/code] |
|
| Back to top |
|
|
gfdsa
n00b
Joined: 01 Jul 2002
Posts: 74
|
| Posted: Sat Sep 07, 2002 1:10 pm Post subject: |
|
|
well... listening to mp3s now ))))))
i recompiled kernel with acpi, kernel's driver still didnt work, but then i recompiled alsa's ones, works perfectly ))))
ICH sux anyway, but alsa rulez
Thank you all for help, love you, peace ! |
|
| Back to top |
|
|
fidler
Apprentice
Joined: 03 Jul 2002
Posts: 162
Location: Utah
|
| Posted: Mon Sep 09, 2002 1:13 pm Post subject: |
|
|
To make it work with the kernel drivers you have to add a line to your modules.autoload.
I think it is:
intel_8x0
But I don't know because I use alsa |
|
| Back to top |
|
|
|
Kernel & Hardware
