Gentoo Forums :: View topic - Problem mit mkisofs

Problem mit mkisofs

View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Gentoo Forums Forum Index

Deutsches Forum (German)

View previous topic :: View next topic

Author

Message

tuxfan
Apprentice

Joined: 14 Feb 2003
Posts: 257

Posted: Sat Feb 21, 2004 11:36 pm Post subject: Problem mit mkisofs

Hallo zusammen,

immer wenn ich mit k3b versuche eine cd zu brennen, bricht der brennvorgang nach 30-40MB ab mit folgender Fehlermeldung:

Quote:

System
-----------------------
K3b Version: 0.11.1
KDE Version: 3.2.0
QT Version: 3.2.3

cdrdao
-----------------------
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ATAPI:/dev/ide/host0/bus1/target1/lun0/cd: RICOH CD-R/RW MP7040A Rev: 1.60
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)
Starting write at speed 4...
Using multi session mode.
Process can be aborted with QUIT signal (usually CTRL-\).
Executing power calibration...
Power calibration successful.
Writing track 01 (mode MODE2_FORM1/MODE2_FORM1 )...
Wrote 1 of 748 MB (Buffers 84% 100%).
Wrote 2 of 748 MB (Buffers 100% 100%).
Wrote 3 of 748 MB (Buffers 100% 100%).
Wrote 4 of 748 MB (Buffers 100% 100%).
Wrote 5 of 748 MB (Buffers 100% 100%).
Wrote 6 of 748 MB (Buffers 100% 100%).
Wrote 7 of 748 MB (Buffers 100% 100%).
Wrote 8 of 748 MB (Buffers 100% 100%).
Wrote 9 of 748 MB (Buffers 100% 100%).
Wrote 10 of 748 MB (Buffers 100% 100%).
Wrote 11 of 748 MB (Buffers 100% 100%).
Wrote 12 of 748 MB (Buffers 100% 100%).
Wrote 13 of 748 MB (Buffers 100% 100%).
Wrote 14 of 748 MB (Buffers 100% 100%).
Wrote 15 of 748 MB (Buffers 100% 100%).
Wrote 16 of 748 MB (Buffers 100% 100%).
Wrote 17 of 748 MB (Buffers 100% 100%).
Wrote 18 of 748 MB (Buffers 100% 100%).
Wrote 19 of 748 MB (Buffers 100% 100%).
Wrote 20 of 748 MB (Buffers 100% 100%).
Wrote 21 of 748 MB (Buffers 100% 100%).
Wrote 22 of 748 MB (Buffers 100% 100%).
Wrote 23 of 748 MB (Buffers 100% 100%).
Wrote 24 of 748 MB (Buffers 100% 100%).
Wrote 25 of 748 MB (Buffers 100% 100%).
Wrote 26 of 748 MB (Buffers 100% 100%).
Wrote 27 of 748 MB (Buffers 100% 100%).
Wrote 28 of 748 MB (Buffers 100% 100%).
Wrote 29 of 748 MB (Buffers 100% 100%).
Wrote 30 of 748 MB (Buffers 100% 100%).
Wrote 31 of 748 MB (Buffers 100% 100%).
Wrote 32 of 748 MB (Buffers 100% 100%).
Wrote 33 of 748 MB (Buffers 100% 100%).
Wrote 34 of 748 MB (Buffers 100% 100%).
Wrote 35 of 748 MB (Buffers 100% 100%).
Wrote 36 of 748 MB (Buffers 100% 100%).
Wrote 37 of 748 MB (Buffers 100% 100%).
Wrote 38 of 748 MB (Buffers 100% 100%).
/usr/bin/cdrdao: Input/output error. : scsi sendcmd: no error
C73DB: 2A 00 00 00 43 7C 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0C 00 00 00 00 0C 00 00 00 00 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 5.171s timeout 180s
ERROR: Write data failed.
ERROR: Writing failed - buffer under run?
ERROR: Writing failed.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/ide/host0/bus1/target1/lun0/cd --driver generic-mmc:0x00000010 --speed 4 --multi -n -v 2 --eject --remote 18 /tmp/kde-torrud/k3bOop1Natoc

mkisofs
-----------------------
333667
0.15% done, estimate finish Sat Feb 21 20:26:38 2004
0.30% done, estimate finish Sat Feb 21 19:59:50 2004
0.45% done, estimate finish Sat Feb 21 19:50:44 2004
0.60% done, estimate finish Sat Feb 21 19:46:01 2004
0.75% done, estimate finish Sat Feb 21 19:52:09 2004
0.90% done, estimate finish Sat Feb 21 21:01:00 2004
1.05% done, estimate finish Sat Feb 21 20:51:36 2004
1.20% done, estimate finish Sat Feb 21 20:44:15 2004
1.35% done, estimate finish Sat Feb 21 20:37:34 2004
1.50% done, estimate finish Sat Feb 21 20:33:19 2004
1.65% done, estimate finish Sat Feb 21 20:28:49 2004
1.80% done, estimate finish Sat Feb 21 20:25:51 2004
1.95% done, estimate finish Sat Feb 21 20:23:28 2004
2.10% done, estimate finish Sat Feb 21 20:20:38 2004
2.25% done, estimate finish Sat Feb 21 20:18:55 2004
2.40% done, estimate finish Sat Feb 21 20:17:19 2004
2.55% done, estimate finish Sat Feb 21 20:16:00 2004
2.70% done, estimate finish Sat Feb 21 20:14:13 2004
2.85% done, estimate finish Sat Feb 21 20:13:11 2004
3.00% done, estimate finish Sat Feb 21 20:12:12 2004
3.15% done, estimate finish Sat Feb 21 20:10:51 2004
3.30% done, estimate finish Sat Feb 21 20:10:07 2004
3.45% done, estimate finish Sat Feb 21 20:08:58 2004
3.60% done, estimate finish Sat Feb 21 20:08:20 2004
3.75% done, estimate finish Sat Feb 21 20:07:47 2004
3.90% done, estimate finish Sat Feb 21 20:06:51 2004
4.05% done, estimate finish Sat Feb 21 20:06:24 2004
4.20% done, estimate finish Sat Feb 21 20:05:57 2004
4.35% done, estimate finish Sat Feb 21 20:05:34 2004
4.50% done, estimate finish Sat Feb 21 20:04:50 2004
4.65% done, estimate finish Sat Feb 21 20:04:31 2004
4.80% done, estimate finish Sat Feb 21 20:04:10 2004
4.95% done, estimate finish Sat Feb 21 20:03:33 2004
5.10% done, estimate finish Sat Feb 21 20:03:17 2004
5.25% done, estimate finish Sat Feb 21 20:02:44 2004
5.40% done, estimate finish Sat Feb 21 20:02:29 2004
5.55% done, estimate finish Sat Feb 21 20:02:16 2004
5.70% done, estimate finish Sat Feb 21 20:01:47 2004
5.85% done, estimate finish Sat Feb 21 20:01:36 2004
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.1 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.1 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-torrud/k3bNyhBnb.tmp -r -hide-list /tmp/kde-torrud/k3bOkghrc.tmp -J -hide-joliet-list /tmp/kde-torrud/k3bUATwza.tmp -l -iso-level 2 -path-list /tmp/kde-torrud/k3bKXl1hc.tmp

Kann mir jemand helfen?

dmesg bringt übrigens keine Fehlermeldung.

toskala
Advocate

Joined: 14 Dec 2002
Posts: 2080
Location: hamburg, germany

Posted: Sun Feb 22, 2004 12:38 am Post subject:

was sagt:

Code:

mkisofs -J -r -o foo.iso /daswasdubrennenwillst

bricht ein mkisofs auch so ab, oder geht das sauber durch?
_________________
adopt an unanswered post
erst denken, dann posten

tuxfan
Apprentice

Joined: 14 Feb 2003
Posts: 257

Posted: Sun Feb 22, 2004 8:05 pm Post subject:

Quote:

was sagt:

Code:
mkisofs -J -r -o foo.iso /daswasdubrennenwillst

bricht ein mkisofs auch so ab, oder geht das sauber durch?

Also da läuft alles sauber durch. Damit dürfte mkisofs als Fehlerquelle wohl ausscheiden. Aber woran soll es denn liegen?

toskala
Advocate

Joined: 14 Dec 2002
Posts: 2080
Location: hamburg, germany

Posted: Sun Feb 22, 2004 8:33 pm Post subject:

lösch mal das k3b verzeichnis unter .kde3.x/... manchmal sind die configs fucked up _________________ adopt an unanswered post erst denken, dann posten

DerMojo
Guru
Guru

Joined: 14 Aug 2003
Posts: 395
Location: Germany

Posted: Sun Feb 22, 2004 9:04 pm Post subject:

Kannst auch mal versuchen, das iso direkt mit cdrecord zu brennen, falls k3b nicht die Fehlerquelle ist. _________________ To err is human, to forgive, beyond the scope of the Operating System.

Display posts from previous:

	Gentoo Forums Forum Index Deutsches Forum (German)	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy