mISDN + AVM Fritzcard Einwahl klappt nicht

[tarsonius]

Hallo,

nachdem ich die bisherigen Postings+Howtos zu mISDN durchgearbeitet habe läuft meine AVM Fritzcard

cat /proc/pci liefert

Bus 0, device 11, function 0:
Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 2).
IRQ 11.
Non-prefetchable 32 bit memory at 0xe5800000 [0xe580001f].
I/O at 0xb400 [0xb41f].

soweit das ich eine korrekte Nachricht in dmesg bekomme

CAPI Subsystem Rev 1.21.6.8
capifs: Rev 1.14.6.8
capi20: Rev 1.1.4.1.2.2: started up with major 68 (middleware+capifs)
Modular ISDN Stack core $Revision: 1.21 $
mISDNd: kernel daemon started
ISDN L1 driver version 1.10
ISDN L2 driver version 1.18
mISDN: DSS1 Rev. 1.23
mISDNd: test event done
mISDN Capi 2.0 driver file version 1.13
ISAC module $Revision: 1.15 $
AVM Fritz PCI/PnP driver Rev. 1.27
PCI: Found IRQ 11 for device 0000:00:0b.0
mISDN_fcpcipnp: found adapter Fritz!Card PCI at 0000:00:0b.0
fritz card eee88040 dch eee880d4 bch1 eee88254 bch2 eee883e0
AVM PCI: stat 0x2020a
AVM PCI: Class A Rev 2
AVM PnP: HDLC version 1
mISDN: AVM Fritz!PCI config irq:11 base:0xB400
spin_lock_adr=eee88064 now(f098ce2a)
busy_lock_adr=eee88064 now(f098ce2a)
AVM PCI/PnP: reset
AVM PCI/PnP: S0/S1 16/0
Fritz1 ISAC STAR 4a
Fritz1 ISAC MODE 0
Fritz1 ISAC ADF2 0
Fritz1 ISAC ISTA 4
Fritz1 ISAC CIR0 52
mISDN_isac_init: ISAC version (0): 2086/2186 V1.1
Fritz1 HDLC 1 STA 81000000
Fritz1 HDLC 2 STA 0
kcapi: Controller 1: mISDN1 attached
AVM Fritz!PCI: IRQ 11 count 5
kcapi: card 1 "mISDN1" ready.
fritz 1 cards installed
pnp: the driver 'fcpnp' has been registered
kcapi: notify up contr 1

wenn ich nun versuche mit per

pppd call isdn/test (test ist configdatei für msn easysurfer)

mich zu connecten kommt in dmesg folgendes

capi20_register:
kcapi: appl 1 up
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
fritz_manager: prim f1880 not handled
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_put_message: applid 0x1
capi20_release: applid 0x1
release_appl: applid 0x1
kcapi: appl 1 down

und per tail -f /var/log/syslog

Feb 28 10:53:36 erde pppd[26722]: Plugin userpass.so loaded.
Feb 28 10:53:36 erde pppd[26722]: userpass: $Revision: 1.4 $
Feb 28 10:53:36 erde pppd[26722]: Plugin capiplugin.so loaded.
Feb 28 10:53:36 erde pppd[26722]: capiplugin: $Revision: 1.32 $
Feb 28 10:53:36 erde pppd[26722]: capiconn: 1.7
Feb 28 10:53:36 erde pppd[26723]: pppd 2.4.1 started by root, uid 0
Feb 28 10:53:36 erde pppd[26723]: capiplugin: phase serialconn.
Feb 28 10:53:36 erde pppd[26723]: capiplugin: contr=1
Feb 28 10:53:36 erde pppd[26723]: controller 1: listen_change_state 0 -> 1
Feb 28 10:53:36 erde pppd[26723]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Feb 28 10:53:36 erde pppd[26723]: controller 1: listen_change_state 1 -> 0
Feb 28 10:53:36 erde kernel: capi20_register:
Feb 28 10:53:36 erde kernel: kcapi: appl 1 up
Feb 28 10:53:36 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:36 erde pppd[26723]: plci_change_state:0x0 0 -> 1 event=1
Feb 28 10:53:36 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:36 erde pppd[26723]: capiplugin: dialing 0192658 (hdlc)
Feb 28 10:53:36 erde pppd[26723]: plci_change_state:0x101 1 -> 2 event=3
Feb 28 10:53:37 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:39 erde pppd[26723]: plci_change_state:0x101 2 -> 3 event=6
Feb 28 10:53:39 erde pppd[26723]: ncci_change_state:0x101 0 -> 1 event=1
Feb 28 10:53:39 erde pppd[26723]: ncci_change_state:0x10101 1 -> 3 event=3
Feb 28 10:53:39 erde pppd[26723]: ncci_change_state:0x10101 3 -> 4 event=7
Feb 28 10:53:39 erde pppd[26723]: ncci 0x10101 up
Feb 28 10:53:39 erde pppd[26723]: capiplugin: connected: "" -> "0192658" outgoing (pcli=0x101/ncci=0x10101)
Feb 28 10:53:39 erde pppd[26723]: capiplugin: capitty not ready, waiting for driver ...
Feb 28 10:53:39 erde kernel: fritz_manager: prim f1880 not handled
Feb 28 10:53:39 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:39 erde last message repeated 3 times
Feb 28 10:53:40 erde pppd[26723]: capiplugin: capitty not ready, waiting for driver ...
Feb 28 10:53:42 erde last message repeated 2 times
Feb 28 10:53:43 erde pppd[26723]: capiplugin: failed to get tty devname - No such process (3)
Feb 28 10:53:44 erde pppd[26723]: controller 1: listen_change_state 0 -> 1
Feb 28 10:53:44 erde pppd[26723]: ncci_change_state:0x10101 4 -> 6 event=12
Feb 28 10:53:44 erde pppd[26723]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Feb 28 10:53:44 erde pppd[26723]: controller 1: listen_change_state 1 -> 0
Feb 28 10:53:44 erde pppd[26723]: ncci_change_state:0x10101 6 -> 7 event=10
Feb 28 10:53:44 erde pppd[26723]: ncci_change_state:0x10101 7 -> 0 event=13
Feb 28 10:53:44 erde pppd[26723]: plci_change_state:0x101 3 -> 7 event=8
Feb 28 10:53:44 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:44 erde last message repeated 3 times
Feb 28 10:53:44 erde pppd[26723]: plci_change_state:0x101 7 -> 8 event=9
Feb 28 10:53:44 erde pppd[26723]: plci_change_state:0x101 8 -> 0 event=11
Feb 28 10:53:44 erde pppd[26723]: capiplugin: disconnect(local): "" -> "0192658" outgoing (pcli=0x101/ncci=0x10101) 0x0000 (0x0000) - No additional information
Feb 28 10:53:44 erde pppd[26723]: capiplugin: exit
Feb 28 10:53:44 erde pppd[26723]: Exit.
Feb 28 10:53:44 erde kernel: capi20_put_message: applid 0x1
Feb 28 10:53:44 erde kernel: capi20_release: applid 0x1
Feb 28 10:53:44 erde kernel: release_appl: applid 0x1
Feb 28 10:53:44 erde kernel: kcapi: appl 1 down


Wieso klappt die Einwahl nicht ?
Hab ich irgendwas falsch gemacht oder fehlt noch irgendwas ?
_________________
Ärsche sind zum sitzen da nicht zum reinkriechen