Gentoo on an SGI Origin 2000 ?

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

I have come into a neglected Origin 2000

, and wanted to know if anyone has ever tried to install gentoo on one. Any tips, etc welcome.

Kumba · Posted: Fri Feb 27, 2004 8:10 pm Post subject:

I haven't tried it, but I think it is possible. Linux does boot on Origin 200, and I believe that makes it possible on the Origin 2000, but I haven't tried. You might want to checkout http://www.linux-mips.org for information to see if the system does boot, and if it does, you might try checking out a 2.6 kernel from linux-mips.org CVS and see if it'll boot on the machine (requires a cross-compiler, etc..).

--Kumba
_________________
"The past tempts us, the present confuses us, the future frightens us. And our lives slip away, moment by moment, lost in that vast, terrible in-between."
--Emperor Turhan, Centauri Republic

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

Thanks, I will give it a go after I clean out the several years of accumulated dust

. I think I may give the gentoo experimental stages for MIPS a shot on it, or maybe just do a reinstall of IRIX on it, since I have the disks, anyone have any advice either way? Also, the current configuration is such that it can only be connected to via a serial terminal. Is there any way to get graphics to function on these machines (I am completely new to SGI systems)?

Kumba · Posted: Sat Feb 28, 2004 6:57 am Post subject:

The graphics systems is unlikely to be supported, but I am not sure. I don't even know what graphics systems are in an Orgin 2000, but there remains a high possibility of them not working.

The MIPS stages labeled "mips4" on my dev site will be the ones to use, as an Origin 2000 likely has processors that meet this mips specification (R500, R10000, R12000, etc..). For a kernel/netboot, you'll most definitely need a 2.6 kernel. You can find out how to pull down a CVS HEAD snapshot from the linux-mips CVS via that site. For a netboot, I have in the netboot folder on my dev site an initrd file which is just the root userland that the netboot uses. Mix that in with a kernel, and you'll have your own netboot image. There is an option in the mips menuconfig that allows you to embed an initrd into the kernel binary.

I'm willing to bet you'll need to build the kernel as 64bit, meaning you will need a mips64 kernel crosscompiler. If you have a Gentoo x86 system, emerge the "crossdev" package, and then run a command like this:

kalisphoenix · Apprentice Joined: 28 Sep 2003 Posts: 211 Location: Ohio

If you don't get it working, PM me and I'll give you my address. :wink:

My girlfriend hasn't shit a brick yet this week.. :lol:

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

Thanks for the advice Kumba, I have gotten it booted under the original IRIX installation, just to make sure it wouldn't go up in flames. Now, back to the noobness - since I have access to the CDROM I am assuming a netboot won't be necessary. Now my question is, if I was to use one of the mips4 stages, will it progress pretty much as it would on a pc or are there some additional steps involved?

dweigert · Posted: Tue Mar 09, 2004 5:11 pm Post subject:

Ok, First question, how many processors and how much RAM does this beast have? The Origin2000 (desk side) can have as many as 8 processors in it. As far as graphics goes, you are SOL. The Origin 2000 is a server only. If you had an Onyx system, that has multiple graphics pipes. Nothing says you can't remote an X display back to another box however :-)

The system is based around the concept of ccNUMA, by the way. Cache Coherent Non Uniform Memory Access is what that stands for. Any linux kernel that you install on it will require NUMA to be enabled.

Dan
_________________
"Always remember to mount a scratch monkey..."

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

The specs are 2 gigs RAM, 3 functioning 250 MHz R10K procs, on 2 node boards 1 9 gig SCSI HDD. This is one of the desksides. I am currently burning the install CD's, and will post back when I get something more to post.

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

I tried Kumba's directions, the toolchain seemed to build properly, and upon configuring and attempting to compile, i get the following (long post):
# make ARCH=mips CROSS_COMPILE=mips64-unknown-linux-gnu- vmlinux.64
make[1]: `arch/mips/kernel/offset.s' is up to date.
make[1]: `arch/mips/kernel/reg.s' is up to date.
CC init/main.o
mips64-unknown-linux-gnu-ld: init/.tmp_main.o: ABI is incompatible with that of the selected emulation
File in wrong format: failed to merge target specific data of file init/.tmp_main.o
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: BFD 2.14.90.0.7 20031029 assertion fail ../../bfd/elflink.h:3273
mips64-unknown-linux-gnu-ld: Attempt to do relocatable link with elf64-tradbigmips input and elf32-tradbigmips output
mips64-unknown-linux-gnu-ld: final link failed: File in wrong format
make[1]: *** [init/main.o] Error 1
make: *** [init] Error 2

if needed here is my .config:

# Automatically generated make config: don't edit
#
CONFIG_MIPS=y
CONFIG_MIPS64=y
CONFIG_64BIT=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Machine selection
#
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_NEC_OSPREY is not set
# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
# CONFIG_SGI_SN0_N_MODE is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_NUMA is not set
# CONFIG_MAPPED_KERNEL is not set
# CONFIG_REPLICATE_KTEXT is not set
# CONFIG_REPLICATE_EXHANDLERS is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_SB1xxx_SOC is not set
# CONFIG_SNI_RM200_PCI is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_IP27=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_MIPS_L1_CACHE_SHIFT=7
# CONFIG_FB is not set
CONFIG_ARC64=y
CONFIG_BOOT_ELF64=y
CONFIG_QL_ISP_A64=y

#
# CPU selection
#
# CONFIG_CPU_MIPS32 is not set
# CONFIG_CPU_MIPS64 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_CPU_R10000=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_MIPS_INSANE_LARGE is not set

#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
# CONFIG_MIPS32_N32 is not set
CONFIG_BINFMT_ELF32=y

#
# MIPS initrd options
#
CONFIG_EMBEDDED_RAMDISK=y
CONFIG_EMBEDDED_RAMDISK_IMAGE="initrd-20040303.gz"

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_INITRD=y

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#

#
# Macintosh device drivers
#

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SGI_IOC3_ETH=y
CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# Mice
#
CONFIG_BUSMOUSE=y
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_SGI_IP27_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_KERNEL is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

Again, note the noob status, any ideas on what I did wrong?

dweigert · Posted: Sun Mar 14, 2004 3:28 am Post subject:

Ok, something isn't liked in your kernel sources. The system thinks it is a different emulation than your libraries are compiled...

Dan
_________________
"Always remember to mount a scratch monkey..."

Kumba · Posted: Mon Mar 15, 2004 3:42 am Post subject:

It's the way the Makefile is rigged. Most of the linux-mips people use older toolchains, I guess they need the setup in the Makefile as is for those toolchains, which isn't the same for newer toolchains.

The trick is to tweak gas-abi under CONFIG_MIPS64 in arch/mips/Makefile to read "64" instead of "32".

There is also a -oformat $(32-bfd) hardcoded into the Makefile farther down that needs changing.

Alternatively, sign up to the gentoo-mips mailing list and trade emails with Chris Stach, whose also got an Origin 2000 and is trying to boot Gentoo on it. He's got a diff to current mipscvs sources (2.6.4 iirc) that gets him some progress.

Start of the thread:
http://marc.theaimsgroup.com/?l=gentoo-mips&m=107901733108001&w=2

Post with patch to mipscvs sources:
http://marc.theaimsgroup.com/?l=gentoo-mips&m=107913216624461&w=2

---

Other resources include joining #mipslinux on irc.freenode.net (and #gentoo-mips if you want to hang with the rest of us). #mipslinux is the IRC home of the primary linux-mips kernel hackers and can probably offer advice. You can also sign up to the linux-mips mailing list and post there too if IRC is not a viable option (or do both).

Linux-mips mailing list:
http://www.linux-mips.org/mail.html

--Kumba
_________________
"The past tempts us, the present confuses us, the future frightens us. And our lives slip away, moment by moment, lost in that vast, terrible in-between."
--Emperor Turhan, Centauri Republic

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

Thanks again Kumba, I patched the kernel, and it compiles fine when I do not build the initrd right into the kernel, and if I do (using the one of your dev site, initrd-20040303.gz) I recieve the following:

cyclopsfar · n00b Joined: 06 Jan 2004 Posts: 8

:Dfinally some progress, yet more problems on netbooting that Origin 2000: I got it to obtain an IP and the kernel from my server, but I get a message like:

Range check failure: Section start 0xa80000010001c000, size 0x2f9730Section would overwrite an already loaded program.Unable to exectute ... not enough space

I did this with bootp():,bootp():/tftpboot/tftpboot/vmlinux.64 and others, same message. Strangely, I could not get tftp to allow the origin to obtain vmlinux.64 without having it in a subfolder of /tftpboot...I have seen some others online having this problem, but could not find a solution. My kernel is like 7.1 megs, not sure if this could be the trouble. Anyone know how to get around this?