| View previous topic :: View next topic |
| Author |
Message |
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
 Posted: Tue Mar 16, 2004 11:45 pm Post subject: [risolto] eth0 up.. ma.. non funziona se non digito sulla.. |
 |
|
Salve,
ho letto un po' di post passati alla ricerca di un problema analogo al mio ma non ho trovato nulla... quindi mi sono permesso di scrivere questo messaggio.
Ho installato la distribuzione dal livecd della 1.4, seguendo le istruzioni passo per passo. Su livecd tutto funzionava correttamente, compresa la rete.
Una volta installato il sistema mi sono ritrovato la rete non funzionante, ma in un modo quantomeno bizzarro, ovvero: eth0 e' su, senza errori apparenti, ma non invia o rivece dati, se non quando digito qualcosa sulla tastiera (usb)! In qualche modo parzialmente funziona, in quanto nel log del server dhcp mi trovo tracce di DHCPDISCOVER, DHCPOFFER, DHCPREQUEST ma una volta ottenuto l'ip niente.
La scheda di rete è integrata sulla schema madre gigabyte, ed ho anche provato a disabilitare tutti i dispositivi integrati, come controller usb, schede audio, etc.. senza successo.
Al ping da un'altro host non si riceve risposta... se non quando viene digiato qualcosa, ricevendo in questo caso qualche risposta...
La scheda di rete è una realtek, con il famoso modulo 8139too che il live funziona perfettamente.
Riassumento:
* gentoo 1.4 da livecd
* kernel 2.4.20-gentoo-r6 compilato con genkernel
* sk rete realtek (8139too)
Se avete qualche suggerimento è il benvenuto, ormai mi sono appassionato alla vicenda e vorrei _capire_ cosa succede!  )
Ciao,
Maurizio
Last edited by zmoog on Sat Mar 20, 2004 7:42 am; edited 1 time in total |
|
| Back to top |
|
 |
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Tue Mar 16, 2004 11:55 pm Post subject: |
|
|
ci pasti un ifconfig un dmesg | grep eth0 e un lsmod 
vediamo di fare un analisi completa [nella speranza di poterti aiutare  ]
_________________
Se segui gli altri non arriverai mai primo
Last edited by alexerre on Wed Mar 17, 2004 3:12 am; edited 1 time in total |
|
| Back to top |
|
|
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
| Posted: Wed Mar 17, 2004 12:51 am Post subject: |
|
|
Ora ho fatto il boot del computer da livecd e con un paio di mount e chroot sto usando l'installazione di gentoo.... qui di seguito allego un grep fatto sul file /var/log/messages che rivela un po' fi informazioni interessanti, come l'impiego del modulo 8139cp, che sembra causare casini! )
Grazie del supporto!!
Mar 17 00:28:00 gentoo syslog-ng[972]: syslog-ng version 1.6.0rc3 starting
2 Mar 17 00:28:00 gentoo syslog-ng[972]: Changing permissions on special file /dev/tty12
3 Mar 17 00:28:00 gentoo Linux version 2.4.20-gentoo-r6 (root@cdimage) (gcc version 3.2.3 20030422 ( Gentoo Linux 1.4 3.2.3-r1, propolice)) #1 Sun Mar 14 22:14:21 UTC 2004
4 Mar 17 00:28:00 gentoo BIOS-provided physical RAM map:
5 Mar 17 00:28:00 gentoo BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
6 Mar 17 00:28:00 gentoo BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
7 Mar 17 00:28:00 gentoo BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
8 Mar 17 00:28:00 gentoo BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
9 Mar 17 00:28:00 gentoo BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
10 Mar 17 00:28:00 gentoo BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
11 Mar 17 00:28:00 gentoo BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
12 Mar 17 00:28:00 gentoo BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
13 Mar 17 00:28:00 gentoo BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
14 Mar 17 00:28:00 gentoo 511MB LOWMEM available.
15 Mar 17 00:28:00 gentoo ACPI: have wakeup address 0xc0001000
16 Mar 17 00:28:00 gentoo On node 0 totalpages: 131056
17 Mar 17 00:28:00 gentoo zone(0): 4096 pages.
18 Mar 17 00:28:00 gentoo zone(1): 126960 pages.
19 Mar 17 00:28:00 gentoo zone(2): 0 pages.
20 Mar 17 00:28:00 gentoo ACPI: RSDP (v000 GBT ) @ 0x000f6640
21 Mar 17 00:28:00 gentoo ACPI: RSDT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3000
22 Mar 17 00:28:00 gentoo ACPI: FADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3040
23 Mar 17 00:28:00 gentoo ACPI: MADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff72c0
24 Mar 17 00:28:00 gentoo ACPI: DSDT (v001 GBT AWRDACPI 00000.04096) @ 0x00000000
25 Mar 17 00:28:00 gentoo ACPI: BIOS passes blacklist
26 Mar 17 00:28:00 gentoo Kernel command line: auto BOOT_IMAGE=linux root=302 root=/dev/hda2
27 Mar 17 00:28:00 gentoo Initializing CPU#0
28 Mar 17 00:28:00 gentoo Detected 1836.264 MHz processor.
29 Mar 17 00:28:00 gentoo Console: colour VGA+ 80x25
30 Mar 17 00:28:00 gentoo Calibrating delay loop... 3656.90 BogoMIPS
31 Mar 17 00:28:00 gentoo Memory: 511160k/524224k available (1492k kernel code, 10500k reserved, -180 4k data, 100k init, 0k highmem)
32 Mar 17 00:28:00 gentoo Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
33 Mar 17 00:28:00 gentoo Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
34 Mar 17 00:28:00 gentoo Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
35 Mar 17 00:28:00 gentoo Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
36 Mar 17 00:28:00 gentoo Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
37 Mar 17 00:28:00 gentoo Proc Config support by ptb@it.uc3m.es
38 Mar 17 00:28:00 gentoo proc config counted 6528 bytes in names
39 Mar 17 00:28:00 gentoo proc config counted 711 bytes in value handles
40 Mar 17 00:28:00 gentoo CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
41 Mar 17 00:28:00 gentoo CPU: L2 Cache: 512K (64 bytes/line)
42 Mar 17 00:28:00 gentoo CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
43 Mar 17 00:28:00 gentoo CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
44 Mar 17 00:28:00 gentoo CPU: AMD Athlon(tm) XP 2500+ stepping 00
45 Mar 17 00:28:00 gentoo Enabling fast FPU save and restore... done.
46 Mar 17 00:28:00 gentoo Enabling unmasked SIMD FPU exception support... done.
47 Mar 17 00:28:00 gentoo Checking 'hlt' instruction... OK.
48 Mar 17 00:28:00 gentoo Checking for popad bug... OK.
49 Mar 17 00:28:00 gentoo POSIX conformance testing by UNIFIX
50 Mar 17 00:28:00 gentoo mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
51 Mar 17 00:28:00 gentoo mtrr: detected mtrr type: Intel
52 Mar 17 00:28:00 gentoo ACPI: Subsystem revision 20021122
53 Mar 17 00:28:00 gentoo PCI: PCI BIOS revision 2.10 entry at 0xfa110, last bus=1
54 Mar 17 00:28:00 gentoo PCI: Using configuration type 1
55 Mar 17 00:28:00 gentoo ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
56 Mar 17 00:28:00 gentoo ACPI: Interpreter enabled
57 Mar 17 00:28:00 gentoo ACPI: Using PIC for interrupt routing
58 Mar 17 00:28:00 gentoo ACPI: System [ACPI] (supports S0 S1 S4 S5)
59 Mar 17 00:28:00 gentoo ACPI: PCI Root Bridge [PCI0] (00:00)
60 Mar 17 00:28:00 gentoo PCI: Probing PCI hardware (bus 00)
61 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
62 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
63 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
64 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
65 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 7 10 11 12 14 15)
66 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled)
67 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled)
68 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled)
69 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled)
70 Mar 17 00:28:00 gentoo PCI: Probing PCI hardware
71 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0
72 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0
73 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0
74 Mar 17 00:28:00 gentoo ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0
75 Mar 17 00:28:00 gentoo PCI: Using ACPI for IRQ routing
76 Mar 17 00:28:00 gentoo PCI: if you experience problems, try using option 'pci=noacpi' or even 'acp i=off'
77 Mar 17 00:28:00 gentoo Linux NET4.0 for Linux 2.4
78 Mar 17 00:28:00 gentoo Based upon Swansea University Computer Society NET3.039
79 Mar 17 00:28:00 gentoo Initializing RT netlink socket
80 Mar 17 00:28:00 gentoo Starting kswapd
81 Mar 17 00:28:00 gentoo Journalled Block Device driver loaded
82 Mar 17 00:28:00 gentoo devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
83 Mar 17 00:28:00 gentoo devfs: boot_options: 0x0
84 Mar 17 00:28:00 gentoo pty: 256 Unix98 ptys configured
85 Mar 17 00:28:00 gentoo Real Time Clock Driver v1.10e
86 Mar 17 00:28:00 gentoo Uniform Multi-Platform E-IDE driver Revision: 6.31
87 Mar 17 00:28:00 gentoo ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
88 Mar 17 00:28:00 gentoo VP_IDE: IDE controller on PCI bus 00 dev 89
89 Mar 17 00:28:00 gentoo VP_IDE: chipset revision 6
90 Mar 17 00:28:00 gentoo VP_IDE: not 100% native mode: will probe irqs later
91 Mar 17 00:28:00 gentoo ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
92 Mar 17 00:28:00 gentoo VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
93 Mar 17 00:28:00 gentoo ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
94 Mar 17 00:28:00 gentoo ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA
95 Mar 17 00:28:00 gentoo hda: Maxtor 6Y160P0, ATA DISK drive
96 Mar 17 00:28:00 gentoo hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 011, ATAPI CD/DVD-ROM drive
97 Mar 17 00:28:00 gentoo ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
98 Mar 17 00:28:00 gentoo ide1 at 0x170-0x177,0x376 on irq 15
99 Mar 17 00:28:00 gentoo blk: queue c0173344, I/O limit 4095Mb (mask 0xffffffff)
100 Mar 17 00:28:00 gentoo hda: 320170943 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA( 133)
101 Mar 17 00:28:00 gentoo hdd: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
102 Mar 17 00:28:00 gentoo Uniform CD-ROM driver Revision: 3.12
103 Mar 17 00:28:00 gentoo Partition check:
104 Mar 17 00:28:00 gentoo /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
105 Mar 17 00:28:00 gentoo RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
106 Mar 17 00:28:00 gentoo Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@ncm.com)
107 Mar 17 00:28:00 gentoo SCSI subsystem driver Revision: 1.00
108 Mar 17 00:28:00 gentoo kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
109 Mar 17 00:28:00 gentoo kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
110 Mar 17 00:28:00 gentoo kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
111 Mar 17 00:28:00 gentoo mice: PS/2 mouse device common for all mice
112 Mar 17 00:28:00 gentoo NET4: Linux TCP/IP 1.0 for NET4.0
113 Mar 17 00:28:00 gentoo IP Protocols: ICMP, UDP, TCP
114 Mar 17 00:28:00 gentoo IP: routing cache hash table of 4096 buckets, 32Kbytes
115 Mar 17 00:28:00 gentoo TCP: Hash tables configured (established 32768 bind 65536)
116 Mar 17 00:28:00 gentoo NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
117 Mar 17 00:28:00 gentoo IPv6 v0.8 for NET4.0
118 Mar 17 00:28:00 gentoo IPv6 over IPv4 tunneling driver
119 Mar 17 00:28:00 gentoo RAMDISK: Compressed image found at block 0
120 Mar 17 00:28:00 gentoo Freeing initrd memory: 1407k freed
121 Mar 17 00:28:00 gentoo VFS: Mounted root (ext2 filesystem).
122 Mar 17 00:28:00 gentoo NCR53c406a: no available ports found
123 Mar 17 00:28:00 gentoo aec671x_detect:
124 Mar 17 00:28:00 gentoo scsi: <fdomain> Detection failed (no card)
125 Mar 17 00:28:00 gentoo megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
126 Mar 17 00:28:00 gentoo megaraid: no BIOS enabled.
127 Mar 17 00:28:00 gentoo DC390: 0 adapters found
128 Mar 17 00:28:00 gentoo Failed initialization of WD-7000 SCSI card!
129 Mar 17 00:28:00 gentoo 3ware Storage Controller device driver for Linux v1.02.00.031.
130 Mar 17 00:28:00 gentoo 3w-xxxx: No cards with valid units found.
131 Mar 17 00:28:00 gentoo NCR53c406a: no available ports found
132 Mar 17 00:28:00 gentoo Red Hat/Adaptec aacraid driver, Mar 14 2004
133 Mar 17 00:28:00 gentoo Loading Adaptec I2O RAID: Version 2.4 Build 5
134 Mar 17 00:28:00 gentoo Detecting Adaptec I2O RAID controllers...
135 Mar 17 00:28:00 gentoo sim710: No NCR53C710 adapter found.
136 Mar 17 00:28:00 gentoo usb.c: registered new driver usbdevfs
137 Mar 17 00:28:00 gentoo usb.c: registered new driver hub
138 Mar 17 00:28:00 gentoo hcd.c: ehci-hcd @ 00:10.3, VIA Technologies, Inc. USB 2.0
139 Mar 17 00:28:00 gentoo hcd.c: irq 6, pci mem e082d000
140 Mar 17 00:28:00 gentoo usb.c: new USB bus registered, assigned bus number 1
141 Mar 17 00:28:00 gentoo ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
142 Mar 17 00:28:00 gentoo hub.c: USB hub found
143 Mar 17 00:28:00 gentoo hub.c: 6 ports detected
144 Mar 17 00:28:00 gentoo uhci.c: USB Universal Host Controller Interface driver v1.1
145 Mar 17 00:28:00 gentoo uhci.c: USB UHCI at I/O 0xd000, IRQ 5
146 Mar 17 00:28:00 gentoo usb.c: new USB bus registered, assigned bus number 2
147 Mar 17 00:28:00 gentoo hub.c: USB hub found
148 Mar 17 00:28:00 gentoo hub.c: 2 ports detected
149 Mar 17 00:28:00 gentoo uhci.c: USB UHCI at I/O 0xd400, IRQ 11
150 Mar 17 00:28:00 gentoo usb.c: new USB bus registered, assigned bus number 3
151 Mar 17 00:28:00 gentoo hub.c: USB hub found
152 Mar 17 00:28:00 gentoo hub.c: 2 ports detected
153 Mar 17 00:28:00 gentoo uhci.c: USB UHCI at I/O 0xd800, IRQ 11
154 Mar 17 00:28:00 gentoo usb.c: new USB bus registered, assigned bus number 4
155 Mar 17 00:28:00 gentoo hub.c: USB hub found
156 Mar 17 00:28:00 gentoo hub.c: 2 ports detected
157 Mar 17 00:28:00 gentoo usb.c: registered new driver hid
158 Mar 17 00:28:00 gentoo hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
159 Mar 17 00:28:00 gentoo hid-core.c: USB HID support drivers
160 Mar 17 00:28:00 gentoo Initializing USB Mass Storage driver...
161 Mar 17 00:28:00 gentoo usb.c: registered new driver usb-storage
162 Mar 17 00:28:00 gentoo USB Mass Storage support registered.
163 Mar 17 00:28:00 gentoo reiserfs: checking transaction log (device 03:02) ...
164 Mar 17 00:28:00 gentoo Using r5 hash to sort names
165 Mar 17 00:28:00 gentoo ReiserFS version 3.6.25
166 Mar 17 00:28:00 gentoo VFS: Mounted root (reiserfs filesystem) readonly.
167 Mar 17 00:28:00 gentoo Trying to move old root to /initrd ... failed
168 Mar 17 00:28:00 gentoo Unmounting old root
169 Mar 17 00:28:00 gentoo Trying to free ramdisk memory ... okay
170 Mar 17 00:28:00 gentoo Freeing unused kernel memory: 100k freed
171 Mar 17 00:28:00 gentoo Unable to find swap-space signature
172 Mar 17 00:28:00 gentoo Unable to find swap-space signature
173 Mar 17 00:28:00 gentoo 8139too Fast Ethernet driver 0.9.26
174 Mar 17 00:28:00 gentoo eth0: RealTek RTL8139 Fast Ethernet at 0xe0901000, 00:0d:61:2a:cb:38, IRQ 1 1
175 Mar 17 00:28:00 gentoo eth0: Identified 8139 chip type 'RTL-8139C'
176 Mar 17 00:28:00 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
177 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
178 Mar 17 00:28:00 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
179 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
180 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
181 Mar 17 00:28:00 gentoo eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.
182 Mar 17 00:28:00 gentoo pci.agent: ... can't load module 8139cp
183 Mar 17 00:28:00 gentoo pci.agent: missing kernel or user mode driver 8139cp
184 Mar 17 00:28:00 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
185 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
186 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
187 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
188 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
189 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
190 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
191 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
192 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
193 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
194 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
195 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
196 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
197 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
198 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
199 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
200 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
201 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
202 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
203 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
204 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
205 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
206 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
207 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
208 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
209 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
210 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
211 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
212 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
213 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
214 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
215 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
216 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
217 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
218 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
219 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
220 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
221 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
222 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
223 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
224 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
225 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
226 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
227 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
228 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
229 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
230 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
231 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
232 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
233 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
234 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
235 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
236 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
237 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
238 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
239 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
240 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
241 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
242 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
243 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
244 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
245 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
246 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
247 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
248 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
249 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
250 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
251 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
252 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
253 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
254 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
255 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
256 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
257 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
258 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
259 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
260 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
261 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
262 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
263 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
264 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
265 Mar 17 00:28:01 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
266 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
267 Mar 17 00:28:01 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
268 Mar 17 00 269 Mar 17 00:28:01 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
270 Mar 17 00:28:01 gentoo pci.agent: ... can't load module 8139cp
271 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver 8139cp
272 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
273 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
274 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
275 Mar 17 00:28:01 gentoo pci.agent: missing kernel or user mode driver uhci
276 Mar 17 00:28:02 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
277 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
278 Mar 17 00:28:02 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
279 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
280 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
281 Mar 17 00:28:02 gentoo pci.agent: ... can't load module 8139cp
282 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver 8139cp
283 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
284 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
285 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
286 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
287 Mar 17 00:28:02 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
288 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
289 Mar 17 00:28:02 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
290 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
291 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
292 Mar 17 00:28:02 gentoo pci.agent: ... can't load module 8139cp
293 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver 8139cp
294 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
295 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
296 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
297 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
298 Mar 17 00:28:02 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
299 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
300 Mar 17 00:28:02 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
301 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
302 Mar 17 00:28:02 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
303 Mar 17 00:28:02 gentoo pci.agent: ... can't load module 8139cp
304 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver 8139cp
305 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver ehci-hcd
306 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
307 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
308 Mar 17 00:28:02 gentoo pci.agent: missing kernel or user mode driver uhci
309 Mar 17 00:28:11 gentoo eth0: no IPv6 routers present
310 Mar 17 00:28:12 gentoo NETDEV WATCHDOG: eth0: transmit timed out
311 Mar 17 00:28:12 gentoo eth0: Tx queue start entry 4 dirty entry 0.
312 Mar 17 00:28:12 gentoo eth0: Tx descriptor 0 is 00002000. (queue head)
:28:01 gentoo insmod: 313 Mar 17 00:28:12 gentoo eth0: Tx descriptor 1 is 00002000.
314 Mar 17 00:28:12 gentoo eth0: Tx descriptor 2 is 00002000.
315 Mar 17 00:28:12 gentoo eth0: Tx descriptor 3 is 00002000.
316 Mar 17 00:28:12 gentoo eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.
317 Mar 17 00:28:36 gentoo NETDEV WATCHDOG: eth0: transmit timed out
318 Mar 17 00:28:36 gentoo eth0: Tx queue start entry 4 dirty entry 0.
319 Mar 17 00:28:36 gentoo eth0: Tx descriptor 0 is 00002000. (queue head)
320 Mar 17 00:28:36 gentoo eth0: Tx descriptor 1 is 00002000.
321 Mar 17 00:28:36 gentoo eth0: Tx descriptor 2 is 00002000.
322 Mar 17 00:28:36 gentoo eth0: Tx descriptor 3 is 00002000.
323 Mar 17 00:28:36 gentoo eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.
324 Mar 17 00:29:00 gentoo dhcpcd[1074]: timed out waiting for a valid DHCP server response
325 Mar 17 00:29:00 gentoo rc-scripts: Failed to bring eth0 up
326 Mar 17 00:34:28 gentoo hub.c: new USB device 00:10.1-1, assigned address 2
327 Mar 17 00:34:29 gentoo hub.c: USB hub found
328 Mar 17 00:34:29 gentoo hub.c: 4 ports detected
329 Mar 17 00:34:29 gentoo hub.c: new USB device 00:10.1-1.1, assigned address 3
330 Mar 17 00:34:29 gentoo hub.c: USB hub found
331 Mar 17 00:34:29 gentoo hub.c: 3 ports detected
332 Mar 17 00:34:30 gentoo hub.c: new USB device 00:10.1-1.2, assigned address 4
333 Mar 17 00:34:33 gentoo usb_control/bulk_msg: timeout
334 Mar 17 00:34:33 gentoo input0: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb3:4.0
335 Mar 17 00:34:33 gentoo hub.c: new USB device 00:10.1-1.4, assigned address 5
336 Mar 17 00:34:33 gentoo : USB HID v1.00 Pointer [0452:0051] on usb3:5.0
337 Mar 17 00:34:34 gentoo hub.c: new USB device 00:10.1-1.1.1, assigned address 6
338 Mar 17 00:34:36 gentoo modprobe: modprobe: Can't locate module mousedev
339 Mar 17 00:34:37 gentoo usb_control/bulk_msg: timeout
340 Mar 17 00:34:37 gentoo input1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboar d] on usb3:6.0
341 Mar 17 00:34:37 gentoo input2: USB HID v1.10 Pointer [Mitsumi Electric Apple Extended USB Keyboard ] on usb3:6.1
342 Mar 17 00:34:39 gentoo login(pam_unix)[1852]: authentication failure; logname= uid=0 euid=0 tty=/d ev/vc/1 ruser= rhost= user=root
343 Mar 17 00:34:39 gentoo login[1852]: FAILED LOGIN 1 FROM /dev/vc/1 FOR root, Authentication failure
344 Mar 17 00:34:40 gentoo modprobe: modprobe: Can't locate module keybdev
345 Mar 17 00:34:56 gentoo login[1852]: FAILED LOGIN 2 FROM /dev/vc/1 FOR root, Authentication failure
346 Mar 17 00:35:03 gentoo login(pam_unix)[1852]: session opened for user root by (uid=0)
/lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed |
|
| Back to top |
|
|
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Wed Mar 17, 2004 12:56 am Post subject: |
|
|
| Code: |
325 Mar 17 00:29:00 gentoo rc-scripts: Failed to bring eth0 up
|
da questo evinco che la tua scheda di rete dopo il boot non è up.
Toglimi una curiosità, il supporto per la scheda di rete l'hai compilato builtin oppure come modules?
_________________
Se segui gli altri non arriverai mai primo |
|
| Back to top |
|
|
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
| Posted: Wed Mar 17, 2004 1:05 am Post subject: |
|
|
Hai ragione... ho fatto un sacco di prove e mi sa che queta mi e' sguggita.
In effetti eth0 e' down, ma con un sempliece /etc/init.d/net.eth0 start parte come se fosse tutto ok, ma con i problemi che ho descritto.
Il kernel l'ho fatto gestire la genkernel, ma poco fa ho fatto un make menuconfig nella dir dei sorgenti ed ho scoperto che tutti e due i moduli (8139too e 8139cp) sono modules....
cdimage 2.4.20-gentoo-r6 # find . -name '8139*'
./kernel/drivers/net/8139too.o
./kernel/drivers/net/8139cp.o
Non vedo il motivo per cui avrebbe dovuto anche includermi il 'cp' ... potrebbe essere utili compilare a mano il kernel e selezionare solamente 8139too, che dici? |
|
| Back to top |
|
|
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Wed Mar 17, 2004 1:21 am Post subject: |
|
|
| zmoog wrote: | | ... potrebbe essere utili compilare a mano il kernel e selezionare solamente 8139too, che dici? |
potrebbe essere una soluzione, spesso genkernel fa qualche pasticcio =(
mi fai un
| Code: |
#cat /var/log/message | grep eth0
|
dopo
| Code: |
/etc/init.d/net.eth0 start
|
e
_________________
Se segui gli altri non arriverai mai primo |
|
| Back to top |
|
|
nomadsoul
Apprentice
Joined: 14 Mar 2004
Posts: 172
|
| Posted: Wed Mar 17, 2004 2:22 am Post subject: |
|
|
potrebbe essere che, essendo compilato come modulo il supporto alla realtek, tu ti sia dimenticato di inserire 8139too dentro l'autoload dei moduli?
fai un
| Code: |
nano -w /etc/modules.d.autoload/kernel-2.4
|
e vedi se c'è 8139too
se non c'è aggiungicelo
in alternativa potresti provare dopo che hai fatto partire net.eth0 a dare
|
|
| Back to top |
|
|
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Wed Mar 17, 2004 3:10 am Post subject: |
|
|
| Code: |
nano -w /etc/modules.d.autoload/kernel-2.4
|
Ecco cosa mi frullava per la testa ma non riuscivo a fixare =)
| Quote: |
in alternativa potresti provare dopo che hai fatto partire net.eth0 a dare
|
io questo lo farei prima
_________________
Se segui gli altri non arriverai mai primo |
|
| Back to top |
|
|
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
| Posted: Wed Mar 17, 2004 9:38 am Post subject: |
|
|
Ho provato varie configurazioni del file /etc/modules.d.autoload/kernel-2.4, sia con che senza 8139too, ma in tutti i casi il comportamento è rimasto quello solito.. e anomalo ... )
La prossima cosa da fare è ricolpilare a mano il kernel... |
|
| Back to top |
|
|
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Wed Mar 17, 2004 9:42 am Post subject: |
|
|
| zmoog wrote: | Ho provato varie configurazioni del file /etc/modules.d.autoload/kernel-2.4, sia con che senza 8139too, ma in tutti i casi il comportamento è rimasto quello solito.. e anomalo ... )
La prossima cosa da fare è ricolpilare a mano il kernel... |
cazz....mi pasti un
_________________
Se segui gli altri non arriverai mai primo |
|
| Back to top |
|
|
Drospy
n00b
Joined: 29 Aug 2003
Posts: 42
Location: Cosenza, Italy
|
| Posted: Wed Mar 17, 2004 9:44 am Post subject: |
|
|
Ciao,
verificando il tuo /var/log/messages l'errore è questo:
173 Mar 17 00:28:00 gentoo 8139too Fast Ethernet driver 0.9.26
174 Mar 17 00:28:00 gentoo eth0: RealTek RTL8139 Fast Ethernet at 0xe0901000, 00:0d:61:2a:cb:38, IRQ 1 1
175 Mar 17 00:28:00 gentoo eth0: Identified 8139 chip type 'RTL-8139C'
176 Mar 17 00:28:00 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
177 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
178 Mar 17 00:28:00 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
179 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
180 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
181 Mar 17 00:28:00 gentoo eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.
182 Mar 17 00:28:00 gentoo pci.agent: ... can't load module 8139cp
183 Mar 17 00:28:00 gentoo pci.agent: missing kernel or user mode driver 8139cp
Verifica attentamente il perchè il modulo 8139cp non viene caricato.
lancia il comando lsmod, in modo da verificare che il modulo esiste
Ciao |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Wed Mar 17, 2004 10:04 am Post subject: |
|
|
| alexerre wrote: |
| Quote: |
in alternativa potresti provare dopo che hai fatto partire net.eth0 a dare
|
|
Hai provato a fare il modprobe del modulo giusto prima di ravanare nei vari files?
_________________
Ciao da me! |
|
| Back to top |
|
|
MadMac
n00b
Joined: 23 Aug 2003
Posts: 53
|
| Posted: Wed Mar 17, 2004 10:31 am Post subject: |
|
|
| Drospy wrote: | Ciao,
verificando il tuo /var/log/messages l'errore è questo:
173 Mar 17 00:28:00 gentoo 8139too Fast Ethernet driver 0.9.26
174 Mar 17 00:28:00 gentoo eth0: RealTek RTL8139 Fast Ethernet at 0xe0901000, 00:0d:61:2a:cb:38, IRQ 1 1
175 Mar 17 00:28:00 gentoo eth0: Identified 8139 chip type 'RTL-8139C'
176 Mar 17 00:28:00 gentoo 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
177 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: init_mod ule: No such device
178 Mar 17 00:28:00 gentoo insmod: Hint: insmod errors can be caused by incorrect module parameters, i ncluding invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
179 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod / lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o failed
180 Mar 17 00:28:00 gentoo insmod: /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139cp.o: insmod 8 139cp failed
181 Mar 17 00:28:00 gentoo eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.
182 Mar 17 00:28:00 gentoo pci.agent: ... can't load module 8139cp
183 Mar 17 00:28:00 gentoo pci.agent: missing kernel or user mode driver 8139cp
Verifica attentamente il perchè il modulo 8139cp non viene caricato.
lancia il comando lsmod, in modo da verificare che il modulo esiste
Ciao |
All'installazione di gentoo ho avuto lo stesso problema. Ho risolto mettendo nella blacklist il driver 8139cp. Dopo di che tutto ok.
eth0 andava up con 8139too e poi down con 8139cp. Ci sono vari post su questo argomento e forse pure una malf ... non ricordo bene.
madmac. |
|
| Back to top |
|
|
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
| Posted: Wed Mar 17, 2004 11:01 am Post subject: |
|
|
| Molto, molto interessante... come si fa a mettere un modulo nela blacklist? |
|
| Back to top |
|
|
MadMac
n00b
Joined: 23 Aug 2003
Posts: 53
|
| Posted: Wed Mar 17, 2004 11:17 am Post subject: |
|
|
| zmoog wrote: | | Molto, molto interessante... come si fa a mettere un modulo nela blacklist? |
Vai in /etc/hotplug e trovi blacklist .. lo apri con un editor e aggiungi come ultima riga
8139cp
Salvi e prova il boot.....
ciao.
MadMac |
|
| Back to top |
|
|
alexerre
Apprentice
Joined: 17 Sep 2003
Posts: 267
Location: Italy
|
| Posted: Wed Mar 17, 2004 11:20 am Post subject: |
|
|
| MadMac wrote: |
Vai in /etc/hotplug e trovi blacklist .. lo apri con un editor e aggiungi come ultima riga
Salvi e prova il boot.....
|
ma a questo punto nn conviene ricompilare il kernel senza quel modulo?!
_________________
Se segui gli altri non arriverai mai primo |
|
| Back to top |
|
|
MadMac
n00b
Joined: 23 Aug 2003
Posts: 53
|
| Posted: Wed Mar 17, 2004 11:33 am Post subject: |
|
|
| alexerre wrote: | | MadMac wrote: |
Vai in /etc/hotplug e trovi blacklist .. lo apri con un editor e aggiungi come ultima riga
Salvi e prova il boot.....
|
ma a questo punto nn conviene ricompilare il kernel senza quel modulo?! |
Lo potra' sempre fare.... intanto si vede se e' quello il problema. Se e' quello alla prima occasione di... lo potra' togliere....
MadMac |
|
| Back to top |
|
|
zmoog
n00b
Joined: 16 Mar 2004
Posts: 20
Location: Torino
|
| Posted: Wed Mar 17, 2004 10:21 pm Post subject: |
|
|
Finalmente vi posso presentare delle buone notizie! )
Funziona... sto indagado per capire esattamente _che cosa_ ha fatto il 'miracolo', perchè non è stato uno singolo intervento a rimettere in funzione la mia bella interfaccia di rete...
Vi posto ulteriori informazioni notizie, se saranno degne di un qualche rilievo, ma non voglio lasciarmi sfuggire l'occasione per ringraziarvi, tutti per la gentilezza, e la cura dei vostri suggerimenti... per non parlare dei tempi di risposta... NULLI!!! ) Mi avete laciato con la bocca aperta!
GRAZIEEEEeeeee!!!!
zmoog |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
