View previous topic :: View next topic |
Author |
Message |
Heinzelmännchen Apprentice
Joined: 11 Mar 2004 Posts: 179 Location: MV, Germany
|
Posted: Wed Mar 24, 2004 7:32 am Post subject: ISA Netzwerkkarte will nicht so, wie sie soll |
|
|
Hi,
ich habe ein Problem mit meiner ISA 3Com (3c509) Karte (eth0). Diese habe ich in den Kernel kompiliert. Bekomme auch eine Ausgabe von eth0. Doch ein Verbindung mit PPPoE ist nicht möglich. Welche jedoch über die andere PCI 3Com Karte (3c900) (eth1) funktioniert. Jedoch wollte ich die ISA für die Verbindung nehmen.
Ich habe mal alle mir bis jetzt möglichen Informationen ausgeben lassen, vielleicht weiß ja einer von Euch woran es dabei liegen kann.
dmesg | grep eth: Code: | eth0: 3c5x9 at 0x220, 10baseT port, address 00 ad 97 2a 6b aa, IRQ 5.
eth1: Dropping NETIF_F_SG since no checksum feature.
eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 13aa
eth0: Setting Rx mode to 1 addresses. |
mii-tool -v: Code: | SIOCGMIIPHY on 'eth0' failed: Operation not supported
eth1: 10 Mbit, half duplex, link ok
product info: vendor 00:00:3f, model 63 rev 15
basic mode: 10 Mbit, half duplex
basic status: autonegotiation complete, remote fault, link ok
capabilities: 100baseT4 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising:
link partner: 100baseT4 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control |
ifconfig: Code: |
eth0 Link encap:Ethernet HWaddr 00:AD:97:2A:6B:AA
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:391
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x220
eth1 Link encap:Ethernet HWaddr 00:62:97:27:C0:D3
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3709 errors:0 dropped:0 overruns:0 frame:0
TX packets:3572 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:449746 (439.2 Kb) TX bytes:354564 (346.2 Kb)
Interrupt:10 Base address:0xe800
|
Das Problem ist halt, das ich absoult keine Verbindung hinbekomme. Warum auch immer...
Hat Jemand eine Idee?
Thx,
Heinzelmännchen _________________ Gute Dinge, will Weile haben! |
|
Back to top |
|
|
siliconburner Guru
Joined: 02 May 2003 Posts: 300
|
Posted: Wed Mar 24, 2004 12:08 pm Post subject: |
|
|
läuft sie denn sonst richtig?
hast du die beiden karten nebeneinander stecken ,bzw eine andere neben der isa? _________________ living in /dev/null |
|
Back to top |
|
|
Heinzelmännchen Apprentice
Joined: 11 Mar 2004 Posts: 179 Location: MV, Germany
|
Posted: Wed Mar 24, 2004 1:31 pm Post subject: |
|
|
Das ist eine gute Frage ob sie richtig läuft. Weiß ich gar nicht genau. Habe derzeit keinen anderen Rechner um sie test zu können.
Sie ist eingemauert.
Sprich daneben ist noch eine ISA Soundkarte und dann noch die PCI 3Com Karte daneben. Der PCI direkt daneben ist aber frei. Geht ja auch nicht anders. _________________ Gute Dinge, will Weile haben! |
|
Back to top |
|
|
siliconburner Guru
Joined: 02 May 2003 Posts: 300
|
Posted: Wed Mar 24, 2004 1:41 pm Post subject: |
|
|
das solltest du erst mal testen, ob sie geht. vielleicht ist sie auch schon tot _________________ living in /dev/null |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|