View previous topic :: View next topic |
Author |
Message |
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 2:06 am Post subject: twinview with dual dvi asus v9520 |
|
|
I have a new 20.1" Dell DVI monitor and a 17" crt monitor. I cannot get it to work in twinview on my asus v9520 card. The problem is that the output is completly random. Meaning, sometimes the display goes on one screen then other times it goes to the other screen between startx es. I have never been able to get the virtual desktop mapped properly on either monitor.
Also when i have connectedmonitor "DFP, CRT" it doesn't work right and I think its because its a dual dvi out and I have to use the dvi to crt adaptor. Not sure if it matters though.
I followed the nvidia README and some discussions on the forum.
Here is my xf86config:
Code: |
Section "Monitor"
Identifier "dell2001fp"
HorizSync 31-80
VertRefresh 60
vendorname "[Dell]"
modelname "[2001fp]"
EndSection
Section "Device"
Identifier "asusV9520"
Driver "nvidia"
vendorname "Asus/Nvidia"
boardname "FX 5200"
#Option "RenderAccel" "False"
#Option "NvAgp" "0"
#VideoRam 32768
# Insert Clocks lines here if appropriate
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "1"
#Option "RenderAccel" "on"
Option "ConnectedMonitor" "DFP, DFP"
# Option "TwinView"
# Option "SecondMonitorHorizSync" "30-70"
# Option "SecondMonitorVertRefresh" "50-120"
# Option "MetaModes" "1600x1200, 1024x768 @1024x768;1600x1200,NULL"
# Option "TwinViewOrientation" "RightOf"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "asusV9520"
Monitor "dell2001fp"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1600x1200/85Hz" "800x600" "1024x768" "1280x1024" "640x480"
ViewPort 0 0
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200/85Hz" "800x600" "1024x768" "1280x1024" "640x480"
ViewPort 0 0
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "800x600" "1024x768" "1280x1024" "640x480"
ViewPort 0 0
Virtual 1600 1200
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "DontZap" "0"
Option "DontZoom" "0"
Option "DontVTSwitch" "0"
Option "HandleSpecialKeys" "Always"
EndSection
|
_________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Thu Apr 01, 2004 4:33 am Post subject: |
|
|
try it out another way of posing your monitors
(concerning another configuration I use).
Therefore visit following post, and just look at my
XF86Config posted there, and the configuration
which is also talked about there:
https://forums.gentoo.org/viewtopic.php?t=148042 _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 6:26 am Post subject: |
|
|
Ok I followed your config file and re-emerged the 2 packages with the xinerama use flag but the second monitor still doesn't work. It goes into power save mode. Also the selections in Display for screen and mutiple monitors are greyed out.
When I start KDE I get the following error: Code: | (WW) asusV9520_2: More than one matching Device section found: 8Q¬; |
Also I cannot switch back to the terminal(ctrl+alt+F1), I just get no input signal from my monitor. _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Thu Apr 01, 2004 9:40 am Post subject: |
|
|
maybe it is partly because your grafic card,
the chipset is nvidia, right ? _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 2:06 pm Post subject: |
|
|
yeah its a fx5200 _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Thu Apr 01, 2004 2:53 pm Post subject: |
|
|
the error tells me that your configuration seems to have
similar or matching sections, could you post your sections of the:
- monitors
- screens
- devices _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 4:49 pm Post subject: |
|
|
Here is the file: Code: |
Section "Monitor"
Identifier "dell2001fp"
HorizSync 31-80
VertRefresh 60
vendorname "Dell"
modelname "2001fp"
#ModeLine "1600x1200/60Hz" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
EndSection
Section "Monitor"
Identifier "kdsAvitron"
HorizSync 30-110
VertRefresh 50-160
vendorname "[kdsAvitron]"
modelname "[kdsAvitron]"
ModeLine "1600x1200/85Hz" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
EndSection
Section "Monitor"
Identifier "diamondPoint"
HorizSync 30-70
VertRefresh 60 #50-120
vendorname "[Mitsubishi]"
modelname "[DiamondPoint SB70]"
#ModeLine 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
EndSection
Section "Device"
Identifier "asusV9520"
Driver "nvidia"
vendorname "Asus/Nvidia"
boardname "FX 5200"
#Option "RenderAccel" "False"
#Option "NvAgp" "0"
#VideoRam 32768
# Insert Clocks lines here if appropriate
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "1"
# Option "RenderAccel" "on"
# Option "ConnectedMonitor" "DFP, DFP"
# Option "TwinView"
# Option "SecondMonitorHorizSync" "30-70"
# Option "SecondMonitorVertRefresh" "50-120"
# Option "MetaModes" "1600x1200, 1024x768 @1024x768;1600x1200,NULL"
# Option "TwinViewOrientation" "RightOf"
EndSection
Section "Device"
Identifier "asusV9520_2"
Driver "nvidia"
# Option "CursorShadow" "on"
# Option "CursorShadowAlpha" "32"
# Option "CursorShadowXOffset" "3"
# Option "CursorShadowYOffset" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "asusV9520"
Monitor "dell2001fp"
DefaultDepth 24
Option "TwinView" "on"
Option "ConnectedMonitor" "DFP, DFP"
Option "SecondMonitorHorizSync" "30-70"
Option "SecondMonitorVertRefresh" "50-120"
Option "MetaModes" "1600x1200, 1024x768 @1024x768;1600x1200,NULL"
Option "TwinViewOrientation" "RightOf"
Subsection "Display"
Depth 24
Modes "1600x1200" "800x600" "1024x768" "1280x1024" "640x480"
ViewPort 0 0
Virtual 1600 1200
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "asusV9520_2"
Monitor "diamondPoint"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "800x600"# "1280x1024" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "DontZap" "0"
Option "DontZoom" "0"
Option "DontVTSwitch" "0"
Option "HandleSpecialKeys" "Always"
EndSection
|
_________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Thu Apr 01, 2004 4:58 pm Post subject: |
|
|
change this:
Code: | Option "ConnectedMonitor" "DFP, DFP" |
to that:
Code: | Option "ConnectedMonitor" "CRT, CRT" |
DFP = Default Flat Panel (or similar)
CRT = Cathod Ray Tube (monitor) _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 5:32 pm Post subject: |
|
|
I will try that when I get home. I do have dual dvi output on my card. One of the outputs actually goes to a flat panel monitor through dvi the other output goes to a crt monitor through a dvi_to_crt adaptor. So i'm not sure if it will work. _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Thu Apr 01, 2004 5:43 pm Post subject: |
|
|
the mode "CRT" always works,
all in all these are possible:
DFP, CRT, TV _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Thu Apr 01, 2004 8:14 pm Post subject: |
|
|
I tried "CRT, CRT" then "DFP, CRT" and then "CRT, DFP" and none of them worked. I received the following error:
Code: |
Using vt 7
(WW) asusV9520_2: More than one matching Device section found: 8Q¬;
(EE) NVIDIA(0): Failed to read mapping of display devices to CRTCs
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
|
If i commented out the option the display on my flat panel(primary) would work but it would be real big and the secondary monitor would go into power standby. _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Sat Apr 03, 2004 8:05 pm Post subject: |
|
|
I can get KDE to pick up the two monitors now. I followed the example in
Code: | /usr/doc/nvidia-glx-1.0.4496/XF86Config.sample.gz |
I can get the primary monitor to work when twin view is enabled, and the secondary is still out of sync. But now if I only try to do a single monitor like before, the secondary display kicks in.
Is it just that I don't have the horizontal and vertical settings right for the second monitor.
They should be Horizontal:30-70kHz(Auto) and vertical:50-120Hz(auto) per the specs. Here is what I have for my config now:
Code: |
Section "Device"
Identifier "asusV9520 twinview"
Driver "nvidia"
vendorname "Asus/Nvidia"
boardname "FX 5200"
#Option "RenderAccel" "False"
#Option "NvAgp" "0"
#VideoRam 32768
# Insert Clocks lines here if appropriate
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "1"
# Option "RenderAccel" "on"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-70"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1600x1200, 1024x768 @1024x768;1600x1200,NULL"
Option "ConnectedMonitor" "DFP, DFP"
EndSection
Section "Device"
Identifier "asusV9520"
Driver "nvidia"
vendorname "Asus/Nvidia"
boardname "FX 5200"
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "1"
EndSection
Section "Screen"
Identifier "Screen Single"
Device "asusV9520"
Monitor "dell2001fp"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1600x1200" "1024x768" "800x600" "1280x1024" "640x480"
ViewPort 0 0
Virtual 1600 1200
EndSubsection
EndSection
Section "Screen"
Identifier "Screen twinview"
Device "asusV9520 twinview"
Monitor "dell2001fp"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1600x1200" "1024x768" "800x600" "1280x1024" "640x480"
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "singleview"
Screen "Screen Single"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "DontZap" "0"
Option "DontZoom" "0"
Option "DontVTSwitch" "0"
Option "HandleSpecialKeys" "Always"
EndSection
Section "ServerLayout"
Identifier "twinview"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "Screen twinview"
Option "DontZap" "0"
Option "DontZoom" "0"
Option "DontVTSwitch" "0"
Option "HandleSpecialKeys" "Always"
EndSection
|
Also why would the secondary monitor go if I just do a singleview layout? _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Sat Apr 03, 2004 8:22 pm Post subject: |
|
|
maybe it is because the parts I just commented in the following code,
which I do not have inserted in my XF86Config:
Code: | Section "Screen"
Identifier "Screen Single"
Device "asusV9520"
Monitor "dell2001fp"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1600x1200" "1024x768" "800x600" "1280x1024" "640x480"
## ViewPort 0 0
## Virtual 1600 1200
EndSubsection
EndSection
|
_________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
DigitalDan Tux's lil' helper
Joined: 18 Nov 2002 Posts: 113 Location: Chicago
|
Posted: Sun Apr 04, 2004 12:24 am Post subject: |
|
|
nah it didn't work, still the same problem.
BTW: I really appreciate your help. _________________ gentoo baby, its the only way! |
|
Back to top |
|
|
sethleon Guru
Joined: 14 Dec 2003 Posts: 398 Location: Germany
|
Posted: Sun Apr 04, 2004 8:42 am Post subject: |
|
|
Good to know that my help is appreciated.
OK, my XF86Config works, so I just post,
what I would comment (in your XF86Config):
Code: | Section "Device"
Identifier "asusV9520 twinview"
Driver "nvidia"
vendorname "Asus/Nvidia"
boardname "FX 5200"
Option "RenderAccel" "1"
Option "NvAGP" "3"
VideoRam 32768
# Insert Clocks lines here if appropriate
## just comment this for now ##
# Option "CursorShadow" "on"
# Option "CursorShadowAlpha" "32"
# Option "CursorShadowXOffset" "3"
# Option "CursorShadowYOffset" "1"
### I noticed your twinview + options ## they belong to SCREEN ##
EndSection
Section "Device"
Identifier "asusV9520"
Driver "nvidia"
Option "NvAGP" "3"
## add this above
# vendorname "Asus/Nvidia"
# boardname "FX 5200"
# Option "CursorShadow" "on"
# Option "CursorShadowAlpha" "32"
# Option "CursorShadowXOffset" "3"
# Option "CursorShadowYOffset" "1"
EndSection
Section "Screen"
Identifier "Screen Single"
Device "asusV9520"
Monitor "dell2001fp"
DefaultDepth 24
Option "TwinView" "on"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1024x768, 1024x768"
# just leave out now too much modes, hmm ... I thought the resolutions must be the same #
# Option "MetaModes" "1600x1200, 1024x768 @1024x768;1600x1200,NULL"
Option "ConnectedMonitor" "DFP, DFP"
Subsection "Display"
Depth 24
# try leaving out too much again ##
Modes "1024x768"
# ViewPort 0 0
# Virtual 1600 1200
EndSubsection
EndSection
Section "Screen"
Identifier "Screen twinview"
Device "asusV9520 twinview"
Monitor "dell2001fp"
DefaultDepth 24
Subsection "Display"
Depth 24
# leave out too much again (for now)
Modes "1024x768"
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Dual Screen" #!!!
Screen 0 "Screen Single" 0 0
Screen 1 "Screen twinview" RightOf "Screen Single"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
# Option "DontZap" "0"
# Option "DontZoom" "0"
# Option "DontVTSwitch" "0"
# Option "HandleSpecialKeys" "Always"
EndSection
# try leaving out double sections
#Section "ServerLayout"
# Identifier "twinview"
# InputDevice "Keyboard1" "CoreKeyboard"
# InputDevice "Mouse1" "CorePointer"
# Screen "Screen twinview"
# Option "DontZap" "0"
# Option "DontZoom" "0"
# Option "DontVTSwitch" "0"
# Option "HandleSpecialKeys" "Always"
#
#EndSection
|
here is my summary:
you have two ServerLayout Sections and some stuff that
I have at another position (e.g. TwinView + options),
maybe that why, because you have set incorrect many options,
he said "too much matching sections".
Please Post your latest Monitor Sections as well,
maybe there are some mistakes, too. _________________ Mess with the best, die like the rest. |
|
Back to top |
|
|
|