| View previous topic :: View next topic |
| Author |
Message |
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
 Posted: Tue May 18, 2004 8:03 pm Post subject: warning al boot relativo all'audio |
 |
|
Salve a tutti,
dove esser riuscito a installare gentoo (dopo molti sforzi sob  ) e ad installare l'audio con successo (kernel 2.6.5 sfruttando gli alsa driver interni) vorrei chiedervi riguardo questo warning che si presenta 3/4 volte durante il boot,
la stringa l'ho presa da log di sistema:
May 18 21:23:33 localhost modprobe: WARNING: Error inserting snd (/lib/modules/2.6.5-gentoo-r1/kernel/sound/core/snd.ko): Inp$May 18 21:23:33 localhost PCI: Found IRQ 5 for device 0000:00:12.0
l'audio funziona correttamente, almno xmms + mp3 funzionano!
ps: la scheda è una Terratec PCI che monta ESS SOLO1 1969
ciao a tutti! |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31467
Location: here
|
| Posted: Tue May 18, 2004 8:38 pm Post subject: |
|
|
Guarda se nel dmesg se dice qulcosa di piu'
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
| Posted: Tue May 18, 2004 8:43 pm Post subject: |
|
|
lo posto 
Linux version 2.6.5-gentoo-r1 (root@livecd) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 SMP Mon May 17 14:59:18 Local time zone mus t be set--see zic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Gentoo ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 751.875 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 254324k/262080k available (2746k kernel code, 7056k reserved, 1042k data , 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1478.65 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 732.02 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 751.0582 MHz.
..... host bus clock speed is 100.0211 MHz.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Activating ISA DMA hang workarounds.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:00:0f.0
eth0: RealTek RTL8139 at 0xd800, 00:40:f4:89:68:07, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC AC28400R, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2 004 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/proje cts/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 184k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
unable to register native major device number 116
unable to register timer device (-16)
can't register device seq
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
PCI: Found IRQ 5 for device 0000:00:12.0
unable to register OSS PCM device 0:0
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
spurious 8259A interrupt: IRQ7.
penso ci sia anche un problemino con agpgart che non so pero' a che serva..  |
|
| Back to top |
|
|
n3mo
l33t
Joined: 28 Mar 2004
Posts: 657
Location: In a Cruel World
|
| Posted: Tue May 18, 2004 9:18 pm Post subject: |
|
|
agpgart module description
This is a basic Linux kernel module and test program for supporting the
(extra) data transfer features of agp cards. It was originally written
as part of the utah-glx accelerated MesaGL driver project, but now is
used for agp access in general under linux. Jeff Hartmann
<jhartmann@valinux.com> is the primary maintainer. |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Thu May 20, 2004 10:46 am Post subject: Re: warning al boot relativo all'audio |
|
|
| chaosgate wrote: | May 18 21:23:33 localhost modprobe: WARNING: Error inserting snd (/lib/modules/2.6.5-gentoo-r1/kernel/sound/core/snd.ko): Inp$May 18 21:23:33 localhost PCI: Found IRQ 5 for device 0000:00:12.0
|
Hai qualche problema con gli IRQ.
ACPI non é in grado di gestirteli eprché il tuo BIOS é vecchio quindi disabilitalo (non serve ai fini dell'errore ma riduce il numero di problemi elencati dal dmesg). Dopo prova a cercare (nella doc di alsa) come settare manualmente l'irq.
L'agpgart... o il drm é configurato male oppure il tuo sistema non lo supporta
...leggendo bene il log ci sono anche altri problemi ma vediamo una cosa alla volta
_________________
Ciao da me! |
|
| Back to top |
|
|
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
| Posted: Fri May 21, 2004 7:29 am Post subject: |
|
|
ho tolto il supporto nel kernel a AGPGART e ho torlto anche il supporto ACPI, per gli IRQ non ho ancora fatto nulla, perchè devo capire ancora come settarli... riposto il mio dmsg:
| Code: |
Linux version 2.6.5-gentoo-r1 (root@livecd) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 SMP Mon May 17 14:59:18 Local time zone must be set--see zic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Gentoo ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 751.887 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 254324k/262080k available (2746k kernel code, 7056k reserved, 1042k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1478.65 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 732.02 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 751.0605 MHz.
..... host bus clock speed is 100.0213 MHz.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Activating ISA DMA hang workarounds.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:00:0f.0
eth0: RealTek RTL8139 at 0xd800, 00:40:f4:89:68:07, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC AC28400R, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 184k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
unable to register native major device number 116
unable to register timer device (-16)
can't register device seq
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
PCI: Found IRQ 5 for device 0000:00:12.0
unable to register OSS PCM device 0:0
spurious 8259A interrupt: IRQ7.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Losing too many ticks!
TSC cannot be used as a timesource. <4>Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
|
|
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Fri May 21, 2004 9:37 am Post subject: |
|
|
| chaosgate wrote: | Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
ALSA device list:
No soundcards found.
|
Mi sa che hai messo il supporto Alsa ma non hai compilato nessun driver.
| Quote: |
unable to register native major device number 116
unable to register timer device (-16)
can't register device seq
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
unable to register native major device number 116
|
Probabilmente hai la linea:
| Code: |
alias char-major-116 snd
|
nel file modules.conf ma non essendo compilato alsa non va
| Quote: |
PCI: Found IRQ 5 for device 0000:00:12.0
unable to register OSS PCM device 0:0
spurious 8259A interrupt: IRQ7.
|
O hai cercato di compilare Alsa e OSS insieme oppure é sempre qualcosa che deriva dal modules.conf
| Quote: |
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Losing too many ticks!
TSC cannot be used as a timesource. <4>Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now |
Questo no so. Sembra un problema legato alla tua versione di X11.
Adesso la domanda:
Hai compilato Alsa? Se si come?
_________________
Ciao da me! |
|
| Back to top |
|
|
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
| Posted: Fri May 21, 2004 9:40 am Post subject: |
|
|
| ho messo il supporto come modulo nel kernel (2.6.5r1) ....provo a impostarlo built-in |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Fri May 21, 2004 9:41 am Post subject: |
|
|
| chaosgate wrote: | | ho messo il supporto come modulo nel kernel (2.6.5r1) ....provo a impostarlo built-in |
Oltre a mettere il supporto alsa hai messo anche quello relativo al tuo chip?
_________________
Ciao da me! |
|
| Back to top |
|
|
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
| Posted: Fri May 21, 2004 10:18 am Post subject: |
|
|
si, certo:
ho ricompilato il kernel includendo (non come modulo) il supporto alsa, ma cosi0 non mi va l'aduio ;(( prima come modulo funzionava..
ecco cmq dmesg dopo la compilazione con alsa e il mio device "incluso"
| Code: |
Linux version 2.6.5-gentoo-r1 (root@livecd) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 SMP Mon May 17 14:59:18 Local time zone must be set--see zic
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Gentoo ro root=303
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 752.026 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 254324k/262080k available (2746k kernel code, 7056k reserved, 1042k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1478.65 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.05 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 751.0588 MHz.
..... host bus clock speed is 100.0211 MHz.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Activating ISA DMA hang workarounds.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:00:0f.0
eth0: RealTek RTL8139 at 0xd800, 00:40:f4:89:68:07, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC AC28400R, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 184k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
spurious 8259A interrupt: IRQ7.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. |
|
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Fri May 21, 2004 10:28 am Post subject: |
|
|
| chaosgate wrote: |
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
ALSA device list:
No soundcards found.
|
Sei sicuro delle tue selezioni?
Puoi postare l'output di lspci e *tutte* le opzioni relative al sonoro che stai compilando?
_________________
Ciao da me! |
|
| Back to top |
|
|
chaosgate
n00b
Joined: 14 Mar 2004
Posts: 37
|
| Posted: Fri May 21, 2004 10:30 am Post subject: |
|
|
nulla, se non metto il supporto come modulo non , ne vuol sapere di andare...  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
