alberto
n00b
Joined: 18 May 2004
Posts: 26
|
 Posted: Fri May 21, 2004 10:47 am Post subject: Sensori ed Abit na7 |
 |
|
Ho provato ad installare lmsensors su kernel 2.6.5-gentoo-r1 e abit na7 che monta un nforce 2.
Installo lm-sensors-2.8.6.ebuild poiche' il sito lo raccomanda con Kernels 2.6.5-rc1 e posteriori.
Come consiglia il sito ho configurato' cosi il mio kernel
| Quote: |
* Code maturity level options
o [*] Prompt for development and/or incomplete code/drivers
* Bus options (PCI, PCMCIA, EISA, MCA, ISA)
o [*] PCI support
o [*] ISA support (not needed anymore since 2.6.2-rc1)
* Device Drivers
o I2C Support
+ <M> I2C Support
+ <M> I2C device interface
+ I2C Algorithms
# <M> (configure all of them as modules)
+ I2C Hardware Bus support
# <M> (configure all of them as modules)
+ I2C Hardware Sensors Chip support
# <M> (configure all of them as modules)
|
Ho installato i moduli e installato il kernel e riavviato.
Dato
| Code: |
modprobe i2c-nforce2
modprobe i2c-is
modprobe eeprom
modprobe w83781d
sensors-detect
|
Risposto sia con le risposte di default che con alcune variazioni.
Ho fatto partire lmsensonsors com
| Code: |
/etc/init.d/lm_sensors start
|
e poi ho dato
e questa e' la risposta che mi da
| Code: |
bash-2.05b# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +0.01 V (min = +0.01 V, max = +0.01 V)
VCore 2: +0.01 V (min = +0.01 V, max = +0.01 V)
+3.3V: +0.01 V (min = +0.01 V, max = +0.01 V)
+5V: +0.01 V (min = +0.01 V, max = +0.01 V)
+12V: +0.02 V (min = +0.02 V, max = +0.02 V)
-12V: -14.88 V (min = -14.88 V, max = -14.88 V)
-5V: -7.69 V (min = -7.69 V, max = -7.69 V)
V5SB: +0.01 V (min = +0.01 V, max = +0.01 V)
VBat: +0.01 V (min = +0.01 V, max = +0.01 V)
fan1: -1 RPM (min = -1 RPM, div = 1)
fan2: -1 RPM (min = -1 RPM, div = 1)
fan3: -1 RPM (min = -1 RPM, div = 1)
temp1: +0 C (high = +0 C, hyst = +0 C) sensor = thermistor
temp2: +0.0 C (high = +0 C, hyst = +0 C) sensor = thermistor
temp3: +0.0 C (high = +0 C, hyst = +0 C) sensor = thermistor
vid: +2.050 V
alarms:
beep_enable:
Sound alarm disabled
eeprom-i2c-0-52
Adapter: SMBus nForce2 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-0-50
Adapter: SMBus nForce2 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
|
Dove sbaglio?
Ciao
Alberto. |
|
Forum italiano (Italian)
