| View previous topic :: View next topic |
| Author |
Message |
pacifist
n00b
Joined: 05 Jun 2004
Posts: 2
|
 Posted: Sat Jun 05, 2004 12:39 am Post subject: help up net |
 |
|
Не получается поднять сеть? сетевуха RT8139
пишу , modprobe 8139too
| Code: | /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: insmod /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o failed
/lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: insmod 8139too failed
|
modprobe 8139cp выдает тоже самое ? что можно сделать? если можно то поподробнее. |
|
| Back to top |
|
 |
GreenDragon
Guru
Joined: 31 Jul 2003
Posts: 319
|
| Posted: Sat Jun 05, 2004 6:46 am Post subject: Re: help up net |
|
|
| pacifist wrote: | Не получается поднять сеть? сетевуха RT8139
пишу , modprobe 8139too
| Code: | /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: insmod /lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o failed
/lib/modules/2.4.20-gentoo-r6/kernel/drivers/net/8139too.o: insmod 8139too failed
|
modprobe 8139cp выдает тоже самое ? что можно сделать? если можно то поподробнее. |
Говорит, что не может найти устройство - возможно проблема с самой картой (железом)
Посмотри вывод dmesg на предмет своей карты |
|
| Back to top |
|
|
pacifist
n00b
Joined: 05 Jun 2004
Posts: 2
|
| Posted: Sat Jun 05, 2004 9:10 am Post subject: |
|
|
| Code: | Linux version 2.4.20-gentoo-r6 (root@cdimage) (gcc version 3.2.3 20030422 (Gento o Linux 1.4 3.2.3-r1, propolice)) #1 Fri May 21 22:08:05 Local time zone must be set--see zic manu
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000fa340
ACPI: RSDT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0030
ACPI: DSDT (v001 SiS 735 00000.00256) @ 0x00000000
ACPI: BIOS passes blacklist
Kernel command line: BOOT_IMAGE=gk_linux root=346 root=/dev/hdb6 init=/lunuxrc
Initializing CPU#0
Detected 1004.293 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1998.84 BogoMIPS
Memory: 511968k/524224k available (1504k kernel code, 9692k reserved, -1820k dat a, 100k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by ptb@it.uc3m.es
proc config counted 3398 bytes in names
proc config counted 379 bytes in value handles
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off '
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS735
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hdb: C/H/S=0/0/0 from BIOS ignored
hda: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
hdb: IC35L040AVER07-0, ATA DISK drive
hdc: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
hdd: probing with STATUS(0x00) instead of ALTSTATUS(0x7f)
hdd: probing with STATUS(0x00) instead of ALTSTATUS(0x7f)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c01734a4, I/O limit 4095Mb (mask 0xffffffff)
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
hda: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target1/lun0: [PTBL] [5005/255/63] p1 p2 < p5 p6 p7 p8 >
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
pktcdvd: v0.0.2p 03/03/2002 Jens Axboe (axboe@suse.de)
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simo n@ncm.com)
Creative EMU10K1 PCI Audio Driver, version 0.20, 22:12:59 May 21 2004
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 580k freed
VFS: Mounted root (ext2 filesystem).
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-ohci.c: USB OHCI at membase 0xe082d000, IRQ 10
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe082f000, IRQ 5
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 100k freed
hub.c: new USB device 00:02.3-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal
hub.c: new USB device 00:02.2-1, assigned address 2
input0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb2:2.0
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003
devfs_register(audio): could not append to parent, err: -17
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
|
Сетевуха в винде пашет |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Russian
