LynZ
Apprentice
Joined: 05 Jan 2004
Posts: 220
Location: MIPT
|
 Posted: Sat Jun 05, 2004 3:13 pm Post subject: Got problems with my maxtor 6y160p0 >> |
 |
|
kernel log:
| Code: |
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y160P0, ATA DISK drive
hda: IRQ probe failed (0xecb8) {!!}
hdb: IRQ probe failed (0xecb8) {!!}
hdb: IRQ probe failed (0xecb8) {!!}
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TEAC CD-W552E, ATAPI CD/DVD-ROM drive
|
after that, during the intensive disk usage fte system hangs up and doesn't responce.....
Any ideas, what an it be&
ABIT NF7-SL(v2.0) mainboard
kernel 2.6.5-gentoo-r1[/code]
_________________
Athlon64 (Venice) 3200+ @ ABIT KN8 ULTRA
1 Gb DDR 400
ASUS GeForce 6200 64Mb PCI-X
2 x Samsung SpinPoint P80 80 Gb
SB Live! 5.1 Player
Sven IMHOO MT 5.1 |
|
Kernel & Hardware
