| View previous topic :: View next topic |
| Author |
Message |
cogitate
n00b
Joined: 05 Dec 2003
Posts: 46
Location: Ontario, Canada
|
 Posted: Mon Jun 07, 2004 2:03 am Post subject: tvtime video - no audio |
 |
|
I'm running an ATI TV Wonder Pro using the cx8800 modules. I've got video working except for a strange colour shift that i have yet to find out how to fix (everything is green), and more importantly there is no sound at all. I've got the card hooked up to a stereo for testing and I get no sound.
lspci says the following:
| Quote: | 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
0000:00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78 )
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
|
Notice that it detects the card wrong, although the picture is still coming up
running tvtime from console gives the following:
| Quote: | Running tvtime 0.9.12.
rtctimer: Cannot open /dev/rtc: Permission denied
rtctimer: Cannot open /dev/misc/rtc: Permission denied
Enhanced Real Time Clock support in your kernel is necessary for
smooth video. We strongly recommend that you load the 'rtc' kernel
module before starting tvtime, and make sure that your user has
access to the device file (/dev/rtc or /dev/misc/rtc). See our
support page at http://tvtime.net/ for more information.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/cogitate/.tvtime/tvtime.xml
Thank you for using tvtime.
|
Real time clock is owned and grouped by root so my little user has no access, I don't get this warning if running tvtime as root.
The card has an audio out jack which I've plugged into the audio in on the sound card, but it didn't work either, besides a stereo is easier for testing purposes.
Thanks for any help. |
|
| Back to top |
|
 |
scoon
l33t
Joined: 23 Aug 2003
Posts: 747
Location: Philadelphia, PA
|
| Posted: Mon Jun 07, 2004 12:01 pm Post subject: Re: tvtime video - no audio |
|
|
| cogitate wrote: | I'm running an ATI TV Wonder Pro using the cx8800 modules. I've got video working except for a strange colour shift that i have yet to find out how to fix (everything is green), and more importantly there is no sound at all. I've got the card hooked up to a stereo for testing and I get no sound.
lspci says the following:
| Quote: | 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
0000:00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78 )
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
|
Notice that it detects the card wrong, although the picture is still coming up
running tvtime from console gives the following:
| Quote: | Running tvtime 0.9.12.
rtctimer: Cannot open /dev/rtc: Permission denied
rtctimer: Cannot open /dev/misc/rtc: Permission denied
Enhanced Real Time Clock support in your kernel is necessary for
smooth video. We strongly recommend that you load the 'rtc' kernel
module before starting tvtime, and make sure that your user has
access to the device file (/dev/rtc or /dev/misc/rtc). See our
support page at http://tvtime.net/ for more information.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/cogitate/.tvtime/tvtime.xml
Thank you for using tvtime.
|
Real time clock is owned and grouped by root so my little user has no access, I don't get this warning if running tvtime as root.
The card has an audio out jack which I've plugged into the audio in on the sound card, but it didn't work either, besides a stereo is easier for testing purposes.
Thanks for any help. |
Hey there,
First I would get that rtc error taken care of first. It is easy and I remember that the tvtime docs are pretty clear about it. Next You need to make certain that the plug you are connecting to gets un-muted with alsa. It will take some fiddling around with mixer volumes but you will get it. Currently, I am running tv-time (for ps2) and have sound working just fine. It did take a little of try&error before I figured out what the correct mixer setting needed to be.
scoon
_________________
Hope this helps........ |
|
| Back to top |
|
|
Valen
Apprentice
Joined: 18 Aug 2002
Posts: 197
Location: Toronto, Ontario, Canada
|
| Posted: Tue Jun 08, 2004 5:56 am Post subject: |
|
|
I got my audio working by manually patching the cx8800 module, here is my diff of cx88-cards.c. From the cx88-0.0.4 dir run patch < (path to diff) and if everything goes well you should be able to do the usual make; make install and get a nice module.
The diff file:
| Code: |
--- cx88-0.0.4/cx88-cards.c 2004-04-19 09:31:41.000000000 -0400
+++ /usr/src/cx88-0.0.4/cx88-cards.c 2004-06-07 18:29:44.000000000 -0400
@@ -99,6 +99,10 @@
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
+ .gpio0 = 0x000003ff,
+ .gpio1 = 0x000000ff,
+ .gpio2 = 0x000000ff,
+ .gpio3 = 0x00000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
|
A couple of notes: the audio thread was running properly, I just wasn't getting any sound. You should see this in the output of dmesg: | Code: | | cx8800[0]: AUD_STATUS: 0xfff4 [stereo/pilot c1] ctl=BTSC_AUTO_STEREO |
.
Since I also have a TV Wonder Pro I expect these values will work for you, however, if you have a windows installation you can determine the correct values for gpio0-3 by using RegSpy, activating your TV tuner and dumping the values it sees.
Credit: This message for the RegSpy idea, and that thread in general for other assistance. |
|
| Back to top |
|
|
cogitate
n00b
Joined: 05 Dec 2003
Posts: 46
Location: Ontario, Canada
|
| Posted: Tue Jun 08, 2004 11:15 pm Post subject: |
|
|
I haven't got a Windows box for this card, so I can't use RegSpy unfortunately. I also don't have the AUD_STATUS line that you mentioned. dmesg follows
| Quote: | ) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #16 Tue Jun 8 16:37:24 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa140
ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_P6 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 video=vesafb:ywrap,mttr vga=0x31A
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2757.637 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 515440k/524224k available (2317k kernel code, 7992k reserved, 1021k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5390.33 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2755.0604 MHz.
..... host bus clock speed is 196.0828 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 99k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:01[A] -> 2-16 -> IRQ 16 level low
00:00:01[B] -> 2-17 -> IRQ 17 level low
00:00:11[C] -> 2-22 -> IRQ 22 level low
00:00:09[B] -> 2-18 -> IRQ 18 level low
00:00:09[C] -> 2-19 -> IRQ 19 level low
00:00:10[A] -> 2-21 -> IRQ 21 level low
00:00:12[A] -> 2-23 -> IRQ 23 level low
00:00:0f[A] -> 2-20 -> IRQ 20 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 C1
13 001 01 1 1 0 1 0 1 1 C9
14 001 01 1 1 0 1 0 1 1 E1
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 B9
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
vesafb: framebuffer at 0xc0000000, mapped to 0xe0807000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: protected mode interface info at c000:5794
vesafb: pmi: set display start = c00c5828, set palette = c00c5874
vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6553
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
radeonfb: cannot reserve FB region
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
Console: switching to colour frame buffer device 160x64
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA PT800 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0b.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xd400. Vers LK1.1.19
eth0: Dropping NETIF_F_SG since no checksum feature.
0000:00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19
via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth2: VIA VT6102 Rhine-II at 0xdfffbc00, 00:0b:6a:42:ec:34, IRQ 23.
eth2: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.3 loaded
cx8800[0]: found at 0000:00:09.0, rev: 5, irq: 17, latency: 32, mmio: 0xde000000
cx8800[0]: subsystem: 1002:00f8, board: ATI TV Wonder Pro [card=4,autodetected]
cx8800[0]: i2c register ok
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
cx8800[0]: set_audio_standard_BTSC (status: unknown)
tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
tuner: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant)) by cx8800[0]
cx8800[0]: i2c attach [client=Philips 4 in 1 (ATI TV Wonder Pro/Conexant)]
tda9887: chip found @ 0x86
cx8800[0]: i2c attach [client=tda9887]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 20
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLP LM10, ATA DISK drive
hdb: FUJITSU MPE3064AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITA CR-587, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 19746720 sectors (10110 MB) w/418KiB Cache, CHS=20896/15/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=13410/15/63
/dev/ide/host0/bus0/target1/lun0: p1
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 1.02 loaded.
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 21, pci mem e2835d00
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. USB
uhci_hcd 0000:00:10.0: irq 21, io base 0000c000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. USB (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0000c400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. USB (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0000c800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. USB (#4)
uhci_hcd 0000:00:10.3: irq 21, io base 0000cc00
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
i2c /dev entries driver
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 0000:00:11.5 to 64
ac97_codec: AC97 codec, id: CMI97 (CMedia)
AC97 codec does not have proper volume support.
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xBC00, IRQ 22
cmpci: version $Revision: 5.64 $ time 16:35:35 Jun 8 2004
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth2: Setting full-duplex based on MII #1 link partner capability of 45e1.
mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
|
I've played with every audio setting I can find, but still no luck. I didn't try the diff above because I couldn't find the audio status line other than | Quote: | | cx8800[0]: set_audio_standard_BTSC (status: unknown) |
I've noticed that when I'm using tvtime, if I change the volume, the LINE alsa control changes as well; so I can only assume that it is the right setting. Having everything on 100% gives no results.
After starting tvtime, dmesg is filled with this
| Quote: | cx8800[0]: set_audio_standard_BTSC (status: unknown)
cx8800[0]: AUD_STATUS: mono / no pilot [status=0xfea2,ctl=0x1003,vol=0x40]
cx8800[0]: set_audio_standard_BTSC (status: unknown)
cx8800[0]: AUD_STATUS: mono / no pilot [status=0xfea2,ctl=0x1003,vol=0x40]
cx8800[0]: AUD_STATUS: mono / no pilot [status=0xfda2,ctl=0x1003,vol=0x40]
cx8800[0]: AUD_STATUS: mono / no pilot [status=0xfda2,ctl=0x1003,vol=0x40]
cx8800[0]: AUD_STATUS: mono / no pilot [status=0xfda2,ctl=0x1003,vol=0x40] |
The last line is simply repeated, /var/log/debug is filled with the same thing. |
|
| Back to top |
|
|
Valen
Apprentice
Joined: 18 Aug 2002
Posts: 197
Location: Toronto, Ontario, Canada
|
| Posted: Wed Jun 09, 2004 1:25 am Post subject: |
|
|
Have you tried switching the audio source in tvtime to stereo -- that might cause it to go to the proper mode. Another possibility is that mono/no pilot is a proper mode and you can just patch the module and load it.
Unfortunately I'm not really an expert in this area. I was just lucky/persistant enough to get the right combination, and I was hoping to share my good fortune. |
|
| Back to top |
|
|
cogitate
n00b
Joined: 05 Dec 2003
Posts: 46
Location: Ontario, Canada
|
| Posted: Wed Jun 09, 2004 12:39 pm Post subject: |
|
|
I have tried changing the preferred audio mode under tvtime's input configuration, still nothing. There are three things in there
none of which work for me. dmesg always fills with the same information no matter which mode I choose. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
