fctk
Veteran
Joined: 28 Jan 2004
Posts: 1424
Location: Milan, Italy, EU
|
 Posted: Sat Jun 12, 2004 6:38 pm Post subject: [howto] gigabyte ga-7vrx + sensors |
 |
|
hi everybody,
i'd want to share my happiness... after a whole afternoon spent in experimenting with sensors now they WORKS!!! 
some infos before:
motherboard: Gigabyte GA-7vrx (rev 2.0)
kernel: 2.6.5-rc1 (gentoo-dev-sources)
i followed this guide: https://forums.gentoo.org/viewtopic.php?t=101573
some tips:
1) i had to compile the following modules:
- i2c support [i2c-core]
- i2c device interface [i2c-dev]
- isa bus support [i2c-viapro]
- ite it87xx [it87]
- lm90 [lm90]
2) with kernel 2.6.5rc1 or better you have to use lm-sensors 2.8.6!!! (see here: http://www2.lm-sensors.nu/~lm78/kernel26.html)
the output of sensor command is this:
| Code: | fctk@sedna fctk $ sensors
lm90-i2c-1-4c
Adapter: SMBus Via Pro adapter at 0400
M/B Temp: +39°C (low = +0°C, high = +70°C)
CPU Temp: +26.6°C (low = +0.0°C, high = +70.0°C)
M/B Crit: +85°C (hyst = +75°C)
CPU Crit: +80°C (hyst = +70°C)
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.72 V (min = +4.08 V, max = +4.08 V) ALARM
VCore 2: +1.23 V (min = +1.28 V, max = +1.68 V) ALARM
+3.3V: +6.52 V (min = +5.56 V, max = +7.54 V)
+5V: +4.84 V (min = +4.49 V, max = +5.48 V)
+12V: +12.08 V (min = +9.84 V, max = +13.92 V)
-12V: -9.11 V (min = -22.99 V, max = -17.08 V) ALARM
-5V: -4.85 V (min = -9.14 V, max = -7.75 V) ALARM
Stdby: +4.91 V (min = +4.49 V, max = +5.48 V)
VBat: +0.00 V
fan1: 2481 RPM (min = 703 RPM, div = 8)
fan2: 0 RPM (min = 703 RPM, div = 8) ALARM
fan3: 0 RPM (min = 2812 RPM, div = 2) ALARM
M/B Temp: +40°C (low = +127°C, high = +127°C) sensor = thermistor
CPU Temp: -55°C (low = +127°C, high = +127°C) sensor = thermistor
Temp3: +82°C (low = +127°C, high = +127°C) sensor = diode |
hope it is helpful... |
|
Kernel & Hardware
