| View previous topic :: View next topic |
| Author |
Message |
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
 Posted: Thu Jun 17, 2004 8:17 am Post subject: [INSTAL] Touchpad Acer Aspire 1623[RISOLTO] |
 |
|
Ciao
Ho un problema con il touchpad del mio portatile (dovrebbe essere un Synaptics)
non riesco a farlo funzionare o meglio neanche a rilevarlo...
uso i gentoo-dev-sources-2.6.5-r1 all'avvio ho una sfilza di errori come detto in un'altro post
| Code: | | atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). |
infatti dopo il boot se do un cat /proc/bus/input/devices ottengo:
| Code: | I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=event0 kbd
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
|
cioè la tastiera...
ho ricompilato il kernel piu' volte ma il risultato è sempre lo stesso, so che il touchpad funziona dato che con il livecd di knoppix, che pero' usa un kernel della serie 2.4.x, viene configurato adeguatamente...
Sono quasi certo di commettere qualche errore nella compilazione del kernel..ma non riesco veramente a venirne a capo...
Qualcuno sa dirmi se ha mai avuto un problema analogo???
help me!
grazie
_________________
"...There are two sort of lies, lies and benchmarks..."
Last edited by X-Drum on Wed Jun 23, 2004 8:58 pm; edited 1 time in total |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30990
Location: here
|
| Posted: Thu Jun 17, 2004 8:29 am Post subject: |
|
|
Hai nel kernel il supporto Device Drivers ---> Input device support --->
| Code: | [*] Mice
<*> PS/2 mouse |
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Thu Jun 17, 2004 8:43 am Post subject: |
|
|
si lo avevo messo e la situazione era rimasta immutata...
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Fri Jun 18, 2004 7:38 am Post subject: |
|
|
ho ricompilato il kernel passando ai love-sources-2.6.6-r4 la situazione è migliorata per molte atre cose ma per qunto riguardo il touchpad sono sempre fermo li....
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
codadilupo
Advocate
Joined: 05 Aug 2003
Posts: 3135
|
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Sat Jun 19, 2004 12:00 pm Post subject: |
|
|
grazie per il link coda! 
nulla da fare ho provato a fare quello che hai riportato nell howto ma la situazione rimane immutata....
guardando in event vedo solo la tastiera e l`eventuale mouse usb se lo metto su...
mooolto triste.... 
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
zUgLiO
l33t
Joined: 12 Aug 2003
Posts: 754
Location: Ferrara (Italy)
|
| Posted: Sat Jun 19, 2004 12:18 pm Post subject: |
|
|
| X-Drum wrote: | l`eventuale mouse usb se lo metto su...
|
Come se lo metti su?!?!? Devi metterlo su!! 
_________________
voglio poi dire che il tempo mi avrà fatto abituare,
ma io non trovo nemmeno brutta la stiva buia di questa nave
|
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Sat Jun 19, 2004 1:56 pm Post subject: |
|
|
| zUgLiO wrote: |
Come se lo metti su?!?!? Devi metterlo su!! |
eccert che lo metto su!!!! uso praticamente sempre quello
è fighissimo! devo risolvere il problema del touchpad cmq è una questione di principio! 
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
motaboy
Developer
Joined: 15 Dec 2003
Posts: 1483
|
| Posted: Sat Jun 19, 2004 2:21 pm Post subject: |
|
|
Potresti postare cosa dice dmesg?
_________________
... |
|
| Back to top |
|
|
federico
Advocate
Joined: 18 Feb 2003
Posts: 3272
Location: Italy, Milano
|
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Sun Jun 20, 2004 2:42 pm Post subject: |
|
|
@federico = a questo punto tutto è possibile, mi sta facendo diventare scemo sto touchpad....appena posso provero' quel famoso patch
@motaboy = ok ecco il mio dmesg sorry per la lunghezza:
| Code: | 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hda6 video=radeonfb:ywrap,mtrr vga=0x317
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 3200.914 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 512524k/523712k available (4115k kernel code, 10404k reserved, 1262k data, 244k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6340.60 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
per-CPU timeslice cutoff: 1462.85 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6389.76 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Total of 2 processors activated (12730.36 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3199.0575 MHz.
..... host bus clock speed is 199.0973 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0: online
domain 0: span 03
groups: 01 02
CPU1: online
domain 0: span 03
groups: 02 01
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 40k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd778, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 3)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:13[A] -> 2-19 -> IRQ 19 level low
00:00:14[A] -> 2-16 -> IRQ 16 level low
00:00:14[B] -> 2-17 -> IRQ 17 level low
00:00:14[C] -> 2-18 -> IRQ 18 level low
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 0FF 0F 0 0 0 0 0 1 1 51
06 0FF 0F 0 0 0 0 0 1 1 59
07 0FF 0F 0 0 0 0 0 1 1 61
08 0FF 0F 0 0 0 0 0 1 1 69
09 0FF 0F 0 0 0 0 0 1 1 71
0a 0FF 0F 0 0 0 0 0 1 1 79
0b 0FF 0F 0 0 0 0 0 1 1 81
0c 0FF 0F 0 0 0 0 0 1 1 89
0d 0FF 0F 0 0 0 0 0 1 1 91
0e 0FF 0F 0 0 0 0 0 1 1 99
0f 0FF 0F 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 B9
11 003 03 1 1 0 1 0 1 1 C1
12 003 03 1 1 0 1 0 1 1 C9
13 003 03 1 1 0 1 0 1 1 B1
14 000 00 1 0 0 0 0 0 0 00
15 0FF 0F 0 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.4
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
radeonfb: Invalid ROM signature 303 should be 0xaa55
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=391.00 Mhz, System=202.00 MHz
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon NP SDR SGRAM 64 MB
vesafb: abort, cannot reserve video memory at 0xe0000000
vesafb: framebuffer at 0xe0000000, mapped to 0xe1833000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5781
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb1: VESA VGA frame buffer device
Machine check exception polling timer started.
Starting balanced_irq
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.11 [Flags: R/W].
udf: registering filesystem
SGI XFS with large block numbers, no debug enabled
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRC] (58 C)
ACPI: Thermal Zone [THRS] (48 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N060ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Slimtype DVDRW SDW-431S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.4 (Tue Mar 30 08:19:30 2004 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Software Suspend has malfunctioning SMP support. Disabled :(
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 244k freed
Adding 393552k swap on /dev/hda5. Priority:-1 extents:1
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xa000, 00:0a:e4:54:a8:8b, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP9100/M chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xdc000000
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: irq 19, pci mem e1d17000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: irq 19, pci mem e1d19000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: irq 19, pci mem e1d1b000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:13.1: remote wakeup
ohci1394: $Rev: 1203 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d8206000-d82067ff] Max Packet=[2048]
PCI: Enabling device 0000:02:04.0 (0000 -> 0002)
Yenta: CardBus bridge found at 0000:02:04.0 [1025:0052]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01001022, devctl 0x64
usb 2-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Qtronix Corp USB MOUSE] on usb-0000:00:13.1-1
Yenta: ISA IRQ mask 0x0eb8, PCI irq 16
Socket status: 30000006
PCI: Enabling device 0000:02:04.1 (0000 -> 0002)
Yenta: CardBus bridge found at 0000:02:04.1 [1025:0052]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x01001022, devctl 0x64
Yenta: ISA IRQ mask 0x0eb8, PCI irq 16
Socket status: 30000006
USB Universal Host Controller Interface driver v2.2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[17103793000ae404]
ip1394: $Rev: 1198 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
|
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
motaboy
Developer
Joined: 15 Dec 2003
Posts: 1483
|
| Posted: Sun Jun 20, 2004 6:30 pm Post subject: |
|
|
Dal dmesg non lo vede proprio. (mamma mia è un dual xeon... in un portatile?!?!? aaaargh....)
Se hai caricato psmouse (o se è builtin) e non lo vede allora credo proprio che devi dare un occhiata a quello che ti dice federico.
_________________
... |
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Sun Jun 20, 2004 8:18 pm Post subject: |
|
|
@motaboy: è un Pentium4 con HT quindi ho messo su il supporto SMP nel kernel è una potenza!
esattamente il kernel non lo rileva affatto sembra proprio che mi ritrovo un touchpad come quello di fede (che ringrazio per la segnalazione  )
provero' a patchare il kernel ho su i love-sources-r4 al momento (che mi chiede quando è se verrano inclusi in portage)
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
X-Drum
Advocate
Joined: 24 Aug 2003
Posts: 2517
Location: ('Modica','Trieste','Ferrara') Italy
|
| Posted: Wed Jun 23, 2004 9:56 pm Post subject: |
|
|
in pratica ho risolto scorporando dal kernel il driver e compilandolo come modulo...(come aveva fatto coda in pratica)
il fatto è molto strano adesso il touchpad viene rilevato correttamente come synaptics,ma per ottenere questo risultato devo caricare il kernel a mano o per mezzo dello script local, infatti /et/modules.autoload fallisce in questo....
cmq restano ancora piccoli problemi con la configurazione sotto Xorg:
ho provato un paio di opzioni ma dopo un po di tempo o se cambio console virtuale il mouse smette di funzionare (solo sotto X ) che protocollo mi consigliate di usare? avete mai avuto problemi simili?
_________________
"...There are two sort of lies, lies and benchmarks..." |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
