| View previous topic :: View next topic |
| Author |
Message |
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
 Posted: Fri Jun 25, 2004 7:00 pm Post subject: plextor cdburner fails to mount |
 |
|
I just upgraded my kernel to 2.6.6-love2. Now my cd burner fails to mount anything. But my dvd drive works great, with no problems. I booted back into my old kernel(2.6.5-love2), and again, no luck there.
it works in windows fine, i just rebooted into it, poped the same cd in, and it showed up, so i don't think its my drive.
What gives? |
|
| Back to top |
|
 |
Duck-Billed Platypus
Guru
Joined: 30 Jun 2003
Posts: 576
Location: Los Angeles, California, United States of America
|
| Posted: Fri Jun 25, 2004 7:05 pm Post subject: |
|
|
Mount or burn? They're different...
Make sure you enabled CD support in your kernel, and the corresponding filesystems (iso9660, etc).
Maybe show your fstab?..
_________________
Dentists are evil. |
|
| Back to top |
|
|
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
| Posted: Fri Jun 25, 2004 7:18 pm Post subject: |
|
|
just mount.
| Code: |
fstab
/dev/hda5 /boot ext2 noauto,noatime 1 1
/dev/hdb2 /windows vfat users,rw,uid=kyle 0 0
/dev/hda6 / reiserfs noatime 0 0
/dev/hdb1 /data vfat users,rw,uid=kyle 0 0
/dev/hda7 none swap sw 0 0
/dev/hdd /mnt/dvd auto ro 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
/dev/hda1 /mnt/windows vfat users,uid=kyle 0 0
/dev/sda1 /mnt/camera auto users,uid=kyle 0 0
|
[/code] |
|
| Back to top |
|
|
Duck-Billed Platypus
Guru
Joined: 30 Jun 2003
Posts: 576
Location: Los Angeles, California, United States of America
|
| Posted: Fri Jun 25, 2004 7:20 pm Post subject: |
|
|
That's odd... Try
and see if anything comes up.
_________________
Dentists are evil. |
|
| Back to top |
|
|
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
| Posted: Fri Jun 25, 2004 7:32 pm Post subject: |
|
|
i get output. but its the wrong drive.
| Code: |
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
hdc: ATAPI 40X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
mines a 52x drive.
|
|
|
| Back to top |
|
|
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
| Posted: Fri Jun 25, 2004 8:00 pm Post subject: |
|
|
i stared playing with it more, and it still won't mount correctly. But when i push the eject button, it says
| Code: |
Input/Ouput error
block on /dev/hdc is write-protected, mounting read-only
|
then i can't control c it, but if i exit out of the eterm, then i can eject the cd. |
|
| Back to top |
|
|
Duck-Billed Platypus
Guru
Joined: 30 Jun 2003
Posts: 576
Location: Los Angeles, California, United States of America
|
| Posted: Fri Jun 25, 2004 8:03 pm Post subject: |
|
|
Okay... Just post your whole dmesg. Maybe there's something in there...
Let me get this straight. You have 2 optical drives--1 CD-RW drive and one DVD drive. Are you sure that hdd is the DVD drive and not the CD-RW drive?
Also, setting the fs type for your CD-RW drive as auto and not iso9660 might help..
_________________
Dentists are evil. |
|
| Back to top |
|
|
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
| Posted: Fri Jun 25, 2004 8:30 pm Post subject: |
|
|
| Code: |
bash-2.05b$ dmesg
rrupt pin A of device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00FMA0, ATA DISK drive
hdb: Maxtor 6Y060L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdb: max request size: 128KiB
hdb: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target1/lun0: p1 p2
hdc: ATAPI 40X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
libata version 1.02 loaded.
ohci1394: $Rev: 1203 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d5800000-d58007ff] Max Packet=[2048]
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d3000000-d30007ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd 0000:00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:09.2: irq 10, pci mem e0861000
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:09.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:09.0: irq 11, io base 0000d800
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:09.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:09.1: irq 11, io base 0000d400
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:11.2: irq 10, io base 0000a400
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:11.3: irq 10, io base 0000a000
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Creative EMU10K1 PCI Audio Driver, version 0.20a, 22:43:13 Jun 21 2004
emu10k1: Audigy rev 3 model 0x5a found, IO at 0xb400-0xb41f, IRQ 5
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Advanced Linux Sound Architecture Driver Version 1.0.4 (Tue Mar 30 08:19:30 2004 UTC).
can't register device seq
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: journal-1153: found in header: first_unflushed_offset 6514, last_flushed_trans_id 259365
ReiserFS: hda6: journal-1206: Starting replay from offset 1113968487700850, trans_id 0
ReiserFS: hda6: journal-1299: Setting newest_mount_id to 92
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800000716dc]
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 164k freed
ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c0081005bdb]
Adding 1004020k swap on /dev/hda7. Priority:-1 extents:1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
Debug: sleeping function called from invalid context at mm/slab.c:1969
in_atomic():1, irqs_disabled():0
[<c0114b40>] __might_sleep+0xb0/0xe0
[<c01391ec>] kmem_cache_alloc+0x6c/0x70
[<c0148334>] __get_vm_area+0x24/0x100
[<c0148442>] get_vm_area+0x32/0x40
[<c011276c>] __ioremap+0xbc/0x110
[<c01127eb>] ioremap_nocache+0x2b/0xb0
[<e0b8b18e>] os_map_kernel_space+0x68/0x6c [nvidia]
[<e0b9d787>] __nvsym00568+0x1f/0x2c [nvidia]
[<e0b9f8a6>] __nvsym00775+0x6e/0xe0 [nvidia]
[<e0b9f936>] __nvsym00781+0x1e/0x190 [nvidia]
[<e0b888f1>] nv_kern_ioctl+0x386/0x397 [nvidia]
[<e0ba13bc>] rm_init_adapter+0xc/0x10 [nvidia]
[<e0b87ec9>] nv_kern_open+0xf3/0x228 [nvidia]
[<e0b87dd6>] nv_kern_open+0x0/0x228 [nvidia]
[<c0156fa0>] chrdev_open+0xb0/0x1c0
[<c014d160>] dentry_open+0x110/0x170
[<c014d042>] filp_open+0x62/0x70
[<c014d43b>] sys_open+0x5b/0x90
[<c0104107>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at mm/slab.c:1969
in_atomic():1, irqs_disabled():0
[<c0114b40>] __might_sleep+0xb0/0xe0
[<c01391ec>] kmem_cache_alloc+0x6c/0x70
[<c0148334>] __get_vm_area+0x24/0x100
[<c0148442>] get_vm_area+0x32/0x40
[<c011276c>] __ioremap+0xbc/0x110
[<c01127eb>] ioremap_nocache+0x2b/0xb0
[<e0b8b18e>] os_map_kernel_space+0x68/0x6c [nvidia]
[<e0b9d787>] __nvsym00568+0x1f/0x2c [nvidia]
[<e0b9f8a6>] __nvsym00775+0x6e/0xe0 [nvidia]
[<e0b9f936>] __nvsym00781+0x1e/0x190 [nvidia]
[<e0b888f1>] nv_kern_ioctl+0x386/0x397 [nvidia]
[<e0ba13bc>] rm_init_adapter+0xc/0x10 [nvidia]
[<e0b87ec9>] nv_kern_open+0xf3/0x228 [nvidia]
[<e0b87dd6>] nv_kern_open+0x0/0x228 [nvidia]
[<c0156fa0>] chrdev_open+0xb0/0x1c0
[<c014d160>] dentry_open+0x110/0x170
[<c014d042>] filp_open+0x62/0x70
[<c014d43b>] sys_open+0x5b/0x90
[<c0104107>] syscall_call+0x7/0xb
0: NVRM: AGPGART: unable to retrieve symbol table
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
hdc: tray open
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: tray open
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: tray open
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 2
hdc: tray open
end_request: I/O error, dev hdc, sector 12
Buffer I/O error on device hdc, logical block 3
hdc: tray open
end_request: I/O error, dev hdc, sector 16
Buffer I/O error on device hdc, logical block 4
hdc: tray open
end_request: I/O error, dev hdc, sector 20
Buffer I/O error on device hdc, logical block 5
hdc: tray open
end_request: I/O error, dev hdc, sector 24
Buffer I/O error on device hdc, logical block 6
hdc: tray open
end_request: I/O error, dev hdc, sector 28
Buffer I/O error on device hdc, logical block 7
hdc: tray open
end_request: I/O error, dev hdc, sector 32
Buffer I/O error on device hdc, logical block 8
hdc: tray open
end_request: I/O error, dev hdc, sector 36
Buffer I/O error on device hdc, logical block 9
hdc: tray open
end_request: I/O error, dev hdc, sector 40
Buffer I/O error on device hdc, logical block 10
hdc: tray open
end_request: I/O error, dev hdc, sector 44
Buffer I/O error on device hdc, logical block 11
hdc: tray open
end_request: I/O error, dev hdc, sector 48
Buffer I/O error on device hdc, logical block 12
hdc: tray open
end_request: I/O error, dev hdc, sector 52
Buffer I/O error on device hdc, logical block 13
hdc: tray open
end_request: I/O error, dev hdc, sector 56
Buffer I/O error on device hdc, logical block 14
hdc: tray open
end_request: I/O error, dev hdc, sector 60
Buffer I/O error on device hdc, logical block 15
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
hdc: tray open
end_request: I/O error, dev hdc, sector 68
Buffer I/O error on device hdc, logical block 17
hdc: tray open
end_request: I/O error, dev hdc, sector 72
Buffer I/O error on device hdc, logical block 18
hdc: tray open
end_request: I/O error, dev hdc, sector 76
Buffer I/O error on device hdc, logical block 19
hdc: tray open
end_request: I/O error, dev hdc, sector 80
Buffer I/O error on device hdc, logical block 20
hdc: tray open
end_request: I/O error, dev hdc, sector 84
Buffer I/O error on device hdc, logical block 21
hdc: tray open
end_request: I/O error, dev hdc, sector 88
Buffer I/O error on device hdc, logical block 22
hdc: tray open
end_request: I/O error, dev hdc, sector 92
Buffer I/O error on device hdc, logical block 23
hdc: tray open
end_request: I/O error, dev hdc, sector 96
Buffer I/O error on device hdc, logical block 24
hdc: tray open
end_request: I/O error, dev hdc, sector 100
Buffer I/O error on device hdc, logical block 25
hdc: tray open
end_request: I/O error, dev hdc, sector 104
Buffer I/O error on device hdc, logical block 26
hdc: tray open
end_request: I/O error, dev hdc, sector 108
Buffer I/O error on device hdc, logical block 27
hdc: tray open
end_request: I/O error, dev hdc, sector 112
Buffer I/O error on device hdc, logical block 28
hdc: tray open
end_request: I/O error, dev hdc, sector 116
Buffer I/O error on device hdc, logical block 29
hdc: tray open
end_request: I/O error, dev hdc, sector 120
Buffer I/O error on device hdc, logical block 30
hdc: tray open
end_request: I/O error, dev hdc, sector 124
Buffer I/O error on device hdc, logical block 31
hdc: tray open
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: tray open
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
hdc: tray open
end_request: I/O error, dev hdc, sector 68
Buffer I/O error on device hdc, logical block 17
cdrom: hdc: mrw address space DMA selected
hdc: tray open
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: tray open
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: tray open
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 2
hdc: tray open
end_request: I/O error, dev hdc, sector 12
Buffer I/O error on device hdc, logical block 3
hdc: tray open
end_request: I/O error, dev hdc, sector 16
Buffer I/O error on device hdc, logical block 4
hdc: tray open
end_request: I/O error, dev hdc, sector 20
Buffer I/O error on device hdc, logical block 5
hdc: tray open
end_request: I/O error, dev hdc, sector 24
Buffer I/O error on device hdc, logical block 6
hdc: tray open
end_request: I/O error, dev hdc, sector 28
Buffer I/O error on device hdc, logical block 7
hdc: tray open
end_request: I/O error, dev hdc, sector 32
Buffer I/O error on device hdc, logical block 8
hdc: tray open
end_request: I/O error, dev hdc, sector 36
Buffer I/O error on device hdc, logical block 9
hdc: tray open
end_request: I/O error, dev hdc, sector 40
Buffer I/O error on device hdc, logical block 10
hdc: tray open
end_request: I/O error, dev hdc, sector 44
Buffer I/O error on device hdc, logical block 11
hdc: tray open
end_request: I/O error, dev hdc, sector 48
Buffer I/O error on device hdc, logical block 12
hdc: tray open
end_request: I/O error, dev hdc, sector 52
Buffer I/O error on device hdc, logical block 13
hdc: tray open
end_request: I/O error, dev hdc, sector 56
Buffer I/O error on device hdc, logical block 14
hdc: tray open
end_request: I/O error, dev hdc, sector 60
Buffer I/O error on device hdc, logical block 15
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
hdc: tray open
end_request: I/O error, dev hdc, sector 68
Buffer I/O error on device hdc, logical block 17
hdc: tray open
end_request: I/O error, dev hdc, sector 72
Buffer I/O error on device hdc, logical block 18
hdc: tray open
end_request: I/O error, dev hdc, sector 76
Buffer I/O error on device hdc, logical block 19
hdc: tray open
end_request: I/O error, dev hdc, sector 80
Buffer I/O error on device hdc, logical block 20
hdc: tray open
end_request: I/O error, dev hdc, sector 84
Buffer I/O error on device hdc, logical block 21
hdc: tray open
end_request: I/O error, dev hdc, sector 88
Buffer I/O error on device hdc, logical block 22
hdc: tray open
end_request: I/O error, dev hdc, sector 92
Buffer I/O error on device hdc, logical block 23
hdc: tray open
end_request: I/O error, dev hdc, sector 96
Buffer I/O error on device hdc, logical block 24
hdc: tray open
end_request: I/O error, dev hdc, sector 100
Buffer I/O error on device hdc, logical block 25
hdc: tray open
end_request: I/O error, dev hdc, sector 104
Buffer I/O error on device hdc, logical block 26
hdc: tray open
end_request: I/O error, dev hdc, sector 108
Buffer I/O error on device hdc, logical block 27
hdc: tray open
end_request: I/O error, dev hdc, sector 112
Buffer I/O error on device hdc, logical block 28
hdc: tray open
end_request: I/O error, dev hdc, sector 116
Buffer I/O error on device hdc, logical block 29
hdc: tray open
end_request: I/O error, dev hdc, sector 120
Buffer I/O error on device hdc, logical block 30
hdc: tray open
end_request: I/O error, dev hdc, sector 124
Buffer I/O error on device hdc, logical block 31
hdc: tray open
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: tray open
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: tray open
end_request: I/O error, dev hdc, sector 64
Buffer I/O error on device hdc, logical block 16
hdc: tray open
end_request: I/O error, dev hdc, sector 68
Buffer I/O error on device hdc, logical block 17
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
|
|
|
| Back to top |
|
|
thejanitor
n00b
Joined: 10 Apr 2004
Posts: 10
|
| Posted: Fri Jun 25, 2004 8:36 pm Post subject: |
|
|
i got a little more stuff, i tried what you said, by changing the file system to ise 9660, and that gave me this:
| Code: |
mount: block device /dev/hdc is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdc, or too many mounted file systems
|
i had to wait about 5 min for that to pop up. |
|
| Back to top |
|
|
Duck-Billed Platypus
Guru
Joined: 30 Jun 2003
Posts: 576
Location: Los Angeles, California, United States of America
|
| Posted: Fri Jun 25, 2004 8:57 pm Post subject: |
|
|
No, I meant taking out the iso9660 and put in auto, like this
| Code: | | /dev/cdroms/cdrom0 /mnt/cdrom auto noauto,ro 0 0 |
Using /dev/hdc instead of /dev/cdroms/cdrom0 might help, too.
I don't think the 40x should matter much.
_________________
Dentists are evil. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
