| View previous topic :: View next topic |
| Author |
Message |
FirechilD
Tux's lil' helper
Joined: 21 Oct 2003
Posts: 120
Location: Germany - NRW
|
 Posted: Fri Jul 02, 2004 3:06 pm Post subject: |
 |
|
its working now 
thx
_________________
The worst foe lies within the self... |
|
| Back to top |
|
 |
zaiyon
Apprentice
Joined: 19 May 2004
Posts: 219
Location: Germany
|
| Posted: Fri Jul 02, 2004 3:52 pm Post subject: |
|
|
| module unloading support and vmware are working perfect now, the new love feels great, thx guys! |
|
| Back to top |
|
|
HydroSan
l33t
Joined: 04 Mar 2004
Posts: 764
Location: The Kremlin (aka Canada)
|
| Posted: Fri Jul 02, 2004 11:06 pm Post subject: |
|
|
I'm getting crappy LAN rates with my TULIP-esque card with this Love. It works fine on Redeeman, but I can't get over 60KB/s on my own LAN with this release!  WTF. Every other computer seems fine.
_________________
I was a Gangster for Capitalism, by Major General Smedley Butler.
Server status: Currently down, being replaced with fresh install - 20% completed. |
|
| Back to top |
|
|
Dolio
l33t
Joined: 17 Jun 2002
Posts: 650
|
| Posted: Fri Jul 02, 2004 11:53 pm Post subject: |
|
|
The slow network performance is known, and according to the LKML, was fixed recently, so you'll probably be fine once love moves to mm6.
Or maybe a patch against mm5 will come out before then. I haven't seen one yet, though.
_________________
They don't have a good bathroom to do coke in. |
|
| Back to top |
|
|
evermind
Guru
Joined: 10 Jan 2004
Posts: 322
|
| Posted: Sat Jul 03, 2004 1:06 am Post subject: |
|
|
I´ve made this diff and for me it works so far - no more slow adsl-connection - but maybe it works not for you
EDIT: as mentioned by jazz use this switch for the patch to apply cleanly
| Code: |
diff -urN linux-2.6.7/net/ipv4/tcp_input.c linux-2.6.7-mm5/net/ipv4/tcp_input.c
--- linux-2.6.7/net/ipv4/tcp_input.c 2004-07-03 01:16:36.435822192 +0200
+++ linux-2.6.7-mm5/net/ipv4/tcp_input.c 2004-07-02 21:58:18.637153312 +0200
@@ -259,7 +259,7 @@
/* Check #1 */
if (tp->rcv_ssthresh < tp->window_clamp &&
(int)tp->rcv_ssthresh < tcp_space(sk) &&
- !tcp_prot.memory_pressure) {
+ !tcp_memory_pressure) {
int incr;
/* Check #2. Increase window, if skb with such overhead
@@ -349,7 +349,7 @@
if (ofo_win) {
if (sk->sk_rcvbuf < sysctl_tcp_rmem[2] &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
- !tcp_prot.memory_pressure &&
+ !tcp_memory_pressure &&
atomic_read(&tcp_memory_allocated) < sysctl_tcp_mem[0])
sk->sk_rcvbuf = min(atomic_read(&sk->sk_rmem_alloc),
sysctl_tcp_rmem[2]);
@@ -3764,7 +3764,7 @@
if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
tcp_clamp_window(sk, tp);
- else if (tcp_prot.memory_pressure)
+ else if (tcp_memory_pressure)
tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss);
tcp_collapse_ofo_queue(sk);
@@ -3844,7 +3844,7 @@
if (tp->packets_out < tp->snd_cwnd &&
!(sk->sk_userlocks & SOCK_SNDBUF_LOCK) &&
- !tcp_prot.memory_pressure &&
+ !tcp_memory_pressure &&
atomic_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
int sndmem = max_t(u32, tp->mss_clamp, tp->mss_cache) +
MAX_TCP_HEADER + 16 + sizeof(struct sk_buff),
diff -urN linux-2.6.7/net/ipv4/tcp_output.c linux-2.6.7-mm5/net/ipv4/tcp_output.c
--- linux-2.6.7/net/ipv4/tcp_output.c 2004-07-03 01:16:36.449820064 +0200
+++ linux-2.6.7-mm5/net/ipv4/tcp_output.c 2004-07-02 21:58:18.670148296 +0200
@@ -672,7 +672,7 @@
if (free_space < full_space/2) {
tp->ack.quick = 0;
- if (tcp_prot.memory_pressure)
+ if (tcp_memory_pressure)
tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U*tp->advmss);
if (free_space < mss)
diff -urN linux-2.6.7/net/ipv4/tcp_timer.c linux-2.6.7-mm5/net/ipv4/tcp_timer.c
--- linux-2.6.7/net/ipv4/tcp_timer.c 2004-07-03 01:16:36.451819760 +0200
+++ linux-2.6.7-mm5/net/ipv4/tcp_timer.c 2004-07-02 21:58:18.674147688 +0200
@@ -257,7 +257,7 @@
TCP_CHECK_TIMER(sk);
out:
- if (tcp_prot.memory_pressure)
+ if (tcp_memory_pressure)
sk_stream_mem_reclaim(sk);
out_unlock:
bh_unlock_sock(sk);
|
Last edited by evermind on Sat Jul 03, 2004 10:56 am; edited 1 time in total |
|
| Back to top |
|
|
Vagabond
Apprentice
Joined: 19 Jan 2003
Posts: 192
|
| Posted: Sat Jul 03, 2004 1:23 am Post subject: |
|
|
| Code: | drivers/char/lirc/lirc_i2c.c: In function `add_to_buf_pcf8574':
drivers/char/lirc/lirc_i2c.c:137: error: structure has no member named `c'
drivers/char/lirc/lirc_i2c.c: In function `add_to_buf_haup':
drivers/char/lirc/lirc_i2c.c:170: error: structure has no member named `c'
drivers/char/lirc/lirc_i2c.c: In function `add_to_buf_pixelview':
drivers/char/lirc/lirc_i2c.c:203: error: structure has no member named `c'
drivers/char/lirc/lirc_i2c.c:212: error: invalid type argument of `unary *'
drivers/char/lirc/lirc_i2c.c:212: error: `b' undeclared (first use in this function)
drivers/char/lirc/lirc_i2c.c:212: error: (Each undeclared identifier is reported only once
drivers/char/lirc/lirc_i2c.c:212: error: for each function it appears in.)
drivers/char/lirc/lirc_i2c.c: In function `add_to_buf_pv951':
drivers/char/lirc/lirc_i2c.c:223: error: structure has no member named `c'
drivers/char/lirc/lirc_i2c.c: In function `add_to_buf_knc1':
drivers/char/lirc/lirc_i2c.c:248: error: structure has no member named `c'
|
It seems to me that the "c"s should be "client" and I dunno what to do about line 212..
Vag |
|
| Back to top |
|
|
Jazz
Guru
Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia
|
| Posted: Sat Jul 03, 2004 9:44 am Post subject: |
|
|
Ok if someone tries to apply that patch directly u may get all the hunks failed.. its due to some whitespace problem..
So while patching use the command and it'll work..
I got this from EvilDarkArchon from the irc.. 
Bye,
Jazz
_________________
In 2010, M$ Windows will be a quantum processing emulation layer for a 128-bit mod of a 64-bit hack of a 32-bit patch to a 16-bit GUI for an 8-bit operating system written for a 4-bit processor from a 2-bit company that can't stand 1 bit of competition. |
|
| Back to top |
|
|
lude
Retired Dev
Joined: 18 Apr 2002
Posts: 114
Location: New York, NY
|
| Posted: Sat Jul 03, 2004 2:46 pm Post subject: |
|
|
| This one broke mptscsih for me. Anyone else? |
|
| Back to top |
|
|
goulash
n00b
Joined: 23 Apr 2004
Posts: 47
Location: Perth, Western Australia
|
| Posted: Sat Jul 03, 2004 4:28 pm Post subject: |
|
|
| cheers for another good love, no problems here on two machines that have it running |
|
| Back to top |
|
|
lude
Retired Dev
Joined: 18 Apr 2002
Posts: 114
Location: New York, NY
|
| Posted: Sat Jul 03, 2004 4:59 pm Post subject: |
|
|
| lude wrote: | | This one broke mptscsih for me. Anyone else? |
Not only that, apparently somewhere between the rc2-mm stuff and 2.6.7-mm4, network code got botched up good. I used to see about 35 megabit from pair.com, now I'm seeing like about 2.
Strangeness... |
|
| Back to top |
|
|
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Sat Jul 03, 2004 5:11 pm Post subject: |
|
|
| Anybody else noticed vim is segfaulting with this release? |
|
| Back to top |
|
|
RoYzter
n00b
Joined: 09 Jan 2004
Posts: 33
|
| Posted: Sat Jul 03, 2004 5:22 pm Post subject: |
|
|
i have problems with usb-storage. i cannot access my external harddisk and keep getting the following in /var/log/messages (debug messages for usb-storage enabled):
| Code: |
Jul 3 19:01:39 cassiopeia ohci_hcd 0000:00:03.0: remote wakeup
Jul 3 19:01:39 cassiopeia usb 1-1: new full speed USB device using address 2
Jul 3 19:01:39 cassiopeia Initializing USB Mass Storage driver...
Jul 3 19:01:39 cassiopeia usb-storage: USB Mass Storage device detected
Jul 3 19:01:39 cassiopeia usb-storage: altsetting is 0, id_index is 93
Jul 3 19:01:39 cassiopeia usb-storage: -- associate_dev
Jul 3 19:01:39 cassiopeia usb-storage: Transport: Bulk
Jul 3 19:01:39 cassiopeia usb-storage: Protocol: Transparent SCSI
Jul 3 19:01:39 cassiopeia usb-storage: Endpoints: In: 0xcd042c14 Out: 0xcd042c00 Int: 0x00000000 (Period 0)
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jul 3 19:01:39 cassiopeia usb-storage: GetMaxLUN command result is 1, data is 0
Jul 3 19:01:39 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:39 cassiopeia scsi0 : SCSI emulation for USB Mass Storage devices
Jul 3 19:01:39 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:39 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:39 cassiopeia usb-storage: Command INQUIRY (6 bytes)
Jul 3 19:01:39 cassiopeia usb-storage: 12 00 00 00 24 00
Jul 3 19:01:39 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 31/31
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk command transfer result=0
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 36/36
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk data transfer result 0x0
Jul 3 19:01:39 cassiopeia usb-storage: Attempting to get CSW...
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 13/13
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk status result = 0
Jul 3 19:01:39 cassiopeia usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Jul 3 19:01:39 cassiopeia usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
Jul 3 19:01:39 cassiopeia usb-storage: scsi cmd done, result=0x0
Jul 3 19:01:39 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:39 cassiopeia Vendor: ST320082 Model: 2A Rev: 3.01
Jul 3 19:01:39 cassiopeia Type: Direct-Access ANSI SCSI revision: 02
Jul 3 19:01:39 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:39 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:39 cassiopeia usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul 3 19:01:39 cassiopeia usb-storage: 00 00 00 00 00 00
Jul 3 19:01:39 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 31/31
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk command transfer result=0
Jul 3 19:01:39 cassiopeia usb-storage: Attempting to get CSW...
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 13/13
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk status result = 0
Jul 3 19:01:39 cassiopeia usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
Jul 3 19:01:39 cassiopeia usb-storage: scsi cmd done, result=0x0
Jul 3 19:01:39 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:39 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:39 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:39 cassiopeia usb-storage: Command READ_CAPACITY (10 bytes)
Jul 3 19:01:39 cassiopeia usb-storage: 25 00 00 00 00 00 00 00 00 00
Jul 3 19:01:39 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 31/31
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk command transfer result=0
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 8/8
Jul 3 19:01:39 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:39 cassiopeia usb-storage: Bulk data transfer result 0x0
Jul 3 19:01:39 cassiopeia usb-storage: Attempting to get CSW...
Jul 3 19:01:39 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jul 3 19:01:39 cassiopeia usb-storage: Status code 0; transferred 13/13
Jul 3 19:01:40 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:40 cassiopeia usb-storage: Bulk status result = 0
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x0
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI device sda: 390721969 512-byte hdwr sectors (200050 MB)
Jul 3 19:01:40 cassiopeia sda: assuming drive cache: write through
Jul 3 19:01:40 cassiopeia /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x4 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code 0; transferred 31/31
Jul 3 19:01:40 cassiopeia usb-storage: -- transfer complete
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=0
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Jul 3 19:01:40 cassiopeia usb-storage: Status code -110; transferred 64/4096
Jul 3 19:01:40 cassiopeia usb-storage: -- timeout or NAK
Jul 3 19:01:40 cassiopeia usb-storage: Bulk data transfer result 0x4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -110
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x5 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -110; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- timeout or NAK
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -110
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x6 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -110; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- timeout or NAK
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -110
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x7 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -110; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- timeout or NAK
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -110
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x8 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -110; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- timeout or NAK
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
Jul 3 19:01:40 cassiopeia usb 1-1: USB disconnect, address 2
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -108
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 0
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 0
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 01 00 00 07 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x9 L 3584 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 1
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 1
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 02 00 00 06 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xa L 3072 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 2
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 2
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 03 00 00 05 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xb L 2560 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 3
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 3
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 04 00 00 04 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xc L 2048 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 4
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 4
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 05 00 00 03 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xd L 1536 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 5
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 5
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 06 00 00 02 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xe L 1024 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 6
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 6
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 07 00 00 01 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0xf L 512 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 7
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 7
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x10 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x11 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x12 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x13 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 00 00 00 08 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x14 L 4096 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 0
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 0
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 01 00 00 07 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x15 L 3584 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 1
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 1
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 02 00 00 06 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x16 L 3072 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 2
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 2
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 03 00 00 05 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x17 L 2560 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 3
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 3
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 04 00 00 04 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x18 L 2048 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 4
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 4
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 05 00 00 03 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x19 L 1536 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 5
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 5
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 06 00 00 02 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x1a L 1024 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 6
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 6
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Command READ_10 (10 bytes)
Jul 3 19:01:40 cassiopeia usb-storage: 28 00 00 00 00 07 00 00 01 00
Jul 3 19:01:40 cassiopeia usb-storage: Bulk Command S 0x43425355 T 0x1b L 512 F 128 Trg 0 LUN 0 CL 10
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 3 19:01:40 cassiopeia usb-storage: Status code -19; transferred 0/31
Jul 3 19:01:40 cassiopeia usb-storage: -- unknown error
Jul 3 19:01:40 cassiopeia usb-storage: Bulk command transfer result=4
Jul 3 19:01:40 cassiopeia usb-storage: -- transport indicates error, resetting
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_Bulk_reset called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 3 19:01:40 cassiopeia usb-storage: Soft reset failed: -19
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x70000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia SCSI error : <0 0 0 0> return code = 0x70000
Jul 3 19:01:40 cassiopeia end_request: I/O error, dev sda, sector 7
Jul 3 19:01:40 cassiopeia Buffer I/O error on device sda, logical block 7
Jul 3 19:01:40 cassiopeia unable to read partition table
Jul 3 19:01:40 cassiopeia Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jul 3 19:01:40 cassiopeia Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (1:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (2:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (3:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (4:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (5:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (6:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia usb-storage: queuecommand called
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: Bad target number (7:0)
Jul 3 19:01:40 cassiopeia usb-storage: scsi cmd done, result=0x40000
Jul 3 19:01:40 cassiopeia usb-storage: *** thread sleeping.
Jul 3 19:01:40 cassiopeia USB Mass Storage device found at 2
Jul 3 19:01:40 cassiopeia usbcore: registered new driver usb-storage
Jul 3 19:01:40 cassiopeia USB Mass Storage support registered.
Jul 3 19:01:40 cassiopeia usb-storage: storage_disconnect() called
Jul 3 19:01:40 cassiopeia usb-storage: usb_stor_stop_transport called
Jul 3 19:01:40 cassiopeia usb-storage: -- usb_stor_release_resources
Jul 3 19:01:40 cassiopeia usb-storage: -- sending exit command to thread
Jul 3 19:01:40 cassiopeia usb-storage: *** thread awakened.
Jul 3 19:01:40 cassiopeia usb-storage: -- exit command received
Jul 3 19:01:40 cassiopeia usb-storage: -- dissociate_dev
|
this snippet is repeated endlessly until i disconnect the drive. apart from that, the kernel runs fine. other kernels (2.6.5-love4, 2.6.6 gentoo development-sources) run fine.
anybody experiencing the same problems? or knows how to fix this?
thx |
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Sat Jul 03, 2004 5:46 pm Post subject: |
|
|
Works Perfect for me now.. what is it about the internet connection speed? I cant feel any diffrens? Thanx Love guys  I love you
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
Chaosite
Guru
Joined: 13 Dec 2003
Posts: 540
Location: Right over here.
|
| Posted: Sat Jul 03, 2004 7:12 pm Post subject: |
|
|
| lude wrote: | | lude wrote: | | This one broke mptscsih for me. Anyone else? |
Not only that, apparently somewhere between the rc2-mm stuff and 2.6.7-mm4, network code got botched up good. I used to see about 35 megabit from pair.com, now I'm seeing like about 2.
Strangeness... |
All you needed to do was look up, dude... 
Theres a (working) patch backported from -bk15 that fixes the network problem.
Also, what is "mptscsih"?
- Chaosite |
|
| Back to top |
|
|
evermind
Guru
Joined: 10 Jan 2004
Posts: 322
|
| Posted: Sat Jul 03, 2004 7:15 pm Post subject: |
|
|
| lude wrote: | | This one broke mptscsih for me. Anyone else? |
what breaks what for you? this love release or the posted patch above to solve the network issue |
|
| Back to top |
|
|
Pink
Veteran
Joined: 24 Jul 2003
Posts: 1062
|
| Posted: Sat Jul 03, 2004 8:28 pm Post subject: |
|
|
| Chaosite wrote: | All you needed to do was look up, dude...
Theres a (working) patch backported from -bk15 that fixes the network problem.
Also, what is "mptscsih"?
- Chaosite |
All you needed to do was look on google, dude...
Theres a (thousand) pages that explains and fixes the mptscish knowledge problem
 |
|
| Back to top |
|
|
Raniz
l33t
Joined: 13 Sep 2003
Posts: 967
Location: Varberg, Sweden
|
| Posted: Sat Jul 03, 2004 8:49 pm Post subject: |
|
|
| I still haven't got a working framebuffer... Any ideas as how to solve it? |
|
| Back to top |
|
|
Jowilly
Guru
Joined: 22 Jun 2002
Posts: 319
|
| Posted: Sat Jul 03, 2004 11:30 pm Post subject: sata breaks |
|
|
On boot sata hangs.
It detects the sata drives, but hangs 2 lines later when displaying the partitions on sda.
love-2.6.7-rc3 works fine.
This is the output with love-2.6.7-rc3 (the output with love-2.6.7 is the same but hangs when detecting the partitions on sda)
| Quote: | scsi1 : sata_promise
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
|
|
|
| Back to top |
|
|
phlashback
Tux's lil' helper
Joined: 27 Jul 2002
Posts: 142
Location: Normal
|
| Posted: Sun Jul 04, 2004 1:04 am Post subject: |
|
|
I am happy to report that I am up and runing with this version using 4k stack thanks to nvidia for updating there driver.
In the process of this I found that (on my system atleast) 4k stacks and preempt are verry broken when used to gether, during boot my modules would dump all over, and eventually hang. 8k stacks and preempt worked fine tho.
At any rate thax OneofOne, andother fine job 
_________________
The terrible thing about hell is that when you're there you can't even tell as you move through this life you love so you could be there and not even know |
|
| Back to top |
|
|
Jazz
Guru
Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia
|
| Posted: Sun Jul 04, 2004 6:54 am Post subject: |
|
|
Lol, 4k stacks and preeempt dont work for me too.. i was getting these kernel page fault message while trying to anything heavy.. finally i thought it might be worth a try to disable the 4k stacks, and what do ya know..
The bugger was the problem all is good now..
Bye,
Jazz
_________________
In 2010, M$ Windows will be a quantum processing emulation layer for a 128-bit mod of a 64-bit hack of a 32-bit patch to a 16-bit GUI for an 8-bit operating system written for a 4-bit processor from a 2-bit company that can't stand 1 bit of competition. |
|
| Back to top |
|
|
teedog
Apprentice
Joined: 09 Mar 2004
Posts: 211
|
| Posted: Sun Jul 04, 2004 8:21 am Post subject: |
|
|
| evermind wrote: | I´ve made this diff and for me it works so far - no more slow adsl-connection - but maybe it works not for you
EDIT: as mentioned by jazz use this switch for the patch to apply cleanly
|
Very newbie-ish question:
How exactly do I apply this patch? Do I copy and paste the above code into a file and then run "patch -p1 -l filename"? Does the file have to be placed in a particular location?
Thanks in advance. |
|
| Back to top |
|
|
Pink
Veteran
Joined: 24 Jul 2003
Posts: 1062
|
| Posted: Sun Jul 04, 2004 8:42 am Post subject: |
|
|
| teedog wrote: |
Very newbie-ish question:
How exactly do I apply this patch? Do I copy and paste the above code into a file and then run "patch -p1 -l filename"? Does the file have to be placed in a particular location?
Thanks in advance. |
more or less right.
Copy the code to a file (net.patch for example)
then cd to the kernel source (/usr/src/2.6.7-love5 for example)
then to apply the patch: | Code: | | patch -p1 -l < /path/to/net.patch |
That's it - watch the output, in case you get any rejects and the like, if it went smoothly, recompile the kernel, mount /boot, copy the new bzImage over, reboot and bask in the glory of full network speed.
If you are trying a new patch, you may also want to try the option --dry-run, like this: | Code: | | patch -p1 -l --dry-run < /path/to/net.patch |
This works a bit like the -p option in emerge, it will not actually apply the patch but will give the output as if it did.
If you are happy with the output, remove the --dry-run option and apply it for real.
HTH |
|
| Back to top |
|
|
teedog
Apprentice
Joined: 09 Mar 2004
Posts: 211
|
| Posted: Sun Jul 04, 2004 9:16 am Post subject: |
|
|
| Thanks, PickledOnion, for your detailed response. |
|
| Back to top |
|
|
Bornio
Tux's lil' helper
Joined: 16 Dec 2002
Posts: 129
|
| Posted: Sun Jul 04, 2004 9:21 am Post subject: |
|
|
Hello,
I noticed that in this version the SCSI Advansys drivers are missing yet the driver files are there!
Is this a love-sources problem? Or Vanilla/MM problem?
Please get the AdvanSys SCSI drivers back.
Thank you. |
|
| Back to top |
|
|
squeegy
Guru
Joined: 13 Mar 2004
Posts: 321
Location: Cincinnati, OH
|
| Posted: Sun Jul 04, 2004 1:42 pm Post subject: |
|
|
FYI if anyone has broken lm-sensors, I fixed it by reversing bk-acpi.patch as mentioned by Andrew Morton, in the release notes of mm5.
If any devices seem to be mysteriously missing, this might help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Unsupported Software
