| View previous topic :: View next topic |
| Author |
Message |
phraktle
n00b
Joined: 21 Apr 2002
Posts: 11
|
 Posted: Tue May 07, 2002 1:24 pm Post subject: 2.4.19-gentoo-r3 kernel problems |
 |
|
after installing the new gentoo kernel (2.4.19-gentoo-r3) with preemtption enabled i get lots of kernel msgs, like below:
| Code: |
rc[13] exited with preempt_count 9
mount[18] exited with preempt_count 4
rc[17] exited with preempt_count 7
cat[19] exited with preempt_count 3
mount[24] exited with preempt_count 1
devfsd[26] exited with preempt_count 481
mount[31] exited with preempt_count 2
ls[56] exited with preempt_count 13
depscan.sh[55] exited with preempt_count 3
ls[278] exited with preempt_count 1
|
any ideas what causes this, and how can i fix it?
i've seen a post by Robert Love ( http://www.geocrawler.com/mail/msg.php3?msg_id=8266691&list=35 ) - according to him the latest XFS drivers would fix this - but aren't those the one's applied to the latest gentoo kernel?
thx  |
|
| Back to top |
|
 |
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Tue May 07, 2002 3:20 pm Post subject: |
|
|
I have different errors during compile time:
setup.c: In function `setup_arch':
setup.c:1071: `acpi_mp_config' undeclared (first use in this function)
setup.c:1071: (Each undeclared identifier is reported only once
setup.c:1071: for each function it appears in.)
make[1]: *** [setup.o] Error 1
make[1]: Leaving directory `/usr/src/linux-2.4.19-gentoo-r3/arch/i386/kernel'
make: *** [_dir_arch/i386/kernel] Error 2 |
|
| Back to top |
|
|
AutoBot
l33t
Joined: 22 Apr 2002
Posts: 968
Location: Usually Out
|
| Posted: Tue May 07, 2002 3:36 pm Post subject: |
|
|
If you take a look in your /usr/src directory you will probably find more that one kernel source, also you linux symlink is probably pointing to your old kernel. What I would do in unmerge all the kerenels you have and then go remove the directorys and symlink in /usr/src/linux then re-emerge gentoo-sources.
_________________
This message self destructed a long time ago. |
|
| Back to top |
|
|
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Tue May 07, 2002 4:00 pm Post subject: |
|
|
Same exact thing. I have nothing else in my /usr/src dir...
root@manic src # ls -al
drwxr-xr-x 5 root root 4096 May 7 11:47 .
drwxr-xr-x 15 root root 4096 Apr 23 15:06 ..
-rw-r--r-- 1 root root 0 Apr 23 15:06 .keep
lrwxrwxrwx 1 root root 24 May 7 11:47 linux -> ./linux-2.4.19-gentoo-r3
drwxr-xr-x 15 root root 4096 May 7 12:01 linux-2.4.19-gentoo-r3
root@manic src # |
|
| Back to top |
|
|
rphillips
Retired Dev
Joined: 18 Apr 2002
Posts: 92
|
| Posted: Tue May 07, 2002 5:00 pm Post subject: |
|
|
It probably deals with the options that you selected when running make menuconfig.
I had to enable ACPI to get the kernel to actually compile, but I have not got it to actually boot yet. |
|
| Back to top |
|
|
Guest
|
| Posted: Tue May 07, 2002 5:30 pm Post subject: |
|
|
| rphillips wrote: | It probably deals with the options that you selected when running make menuconfig.
I had to enable ACPI to get the kernel to actually compile, but I have not got it to actually boot yet. |
Nuts. I already have it disabled... |
|
| Back to top |
|
|
phraktle
n00b
Joined: 21 Apr 2002
Posts: 11
|
| Posted: Tue May 07, 2002 6:03 pm Post subject: even better... |
|
|
um, i guess i'll downgrade my kernel...
i've seen this a couple of times now, and i don't think it means anything good
| Code: |
Delalloc page c1321da0 removed from inode
kernel BUG at filemap.c:130!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01286c0>] Tainted: P
EFLAGS: 00010286
eax: 0000002a ebx: c24e4000 ecx: ffffffd3 edx: c24e4000
esi: c1321da0 edi: 00000000 ebp: 00000000 esp: c24e5cfc
ds: 0018 es: 0018 ss: 0018
Process a.out (pid: 4350, stackpage=c24e5000)
Stack: c0291b00 c1321da0 c24e4000 00000000 c0128754 c1321da0 c1321da0 c012890f
c1321da0 c1321da0 c0128a86 c1321da0 00000000 c24e5d68 00000000 ce6e37b4
c24e4000 00000000 00000001 c24e5d68 00000000 ce6e37b4 c0128b1b 00000000
Call Trace: [<c0128754>] [<c012890f>] [<c0128a86>] [<c0128b1b>] [<c01d89da>]
[<c01dbacb>] [<c01b85ff>] [<c01cf121>] [<c01de8cf>] [<c014e9cc>] [<c0137669>]
[<c01de72d>] [<c0144544>] [<c01384ab>] [<c0138817>] [<c01088ab>]
Code: 0f 0b 82 00 da 1a 29 c0 83 c4 08 8b 46 18 a8 10 74 08 0f 0b
<3>a.out[4350] exited with preempt_count 2
|
|
|
| Back to top |
|
|
AutoBot
l33t
Joined: 22 Apr 2002
Posts: 968
Location: Usually Out
|
| Posted: Tue May 07, 2002 10:03 pm Post subject: |
|
|
Hum I had that same error and did what I posted above to fix it, you could just download the regular sources and patch them with xfs if needed.
_________________
This message self destructed a long time ago. |
|
| Back to top |
|
|
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Wed May 08, 2002 2:29 am Post subject: Same thing |
|
|
I have the new kernel sources downloaded and get the same errors, even on a different system:
gcc -D__KERNEL__ -I/usr/src/linux-2.4.19-gentoo-r3/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i686 -nostdinc -I /usr/lib/gcc-lib/i686-pc-linux-gnu/2.95.3/include -DKBUILD_BASENAME=setup -c -o setup.o setup.c
setup.c: In function `setup_arch':
setup.c:1071: `acpi_mp_config' undeclared (first use in this function)
setup.c:1071: (Each undeclared identifier is reported only once
setup.c:1071: for each function it appears in.)
make[1]: *** [setup.o] Error 1
make[1]: Leaving directory `/usr/src/linux-2.4.19-gentoo-r3/arch/i386/kernel'
make: *** [_dir_arch/i386/kernel] Error 2 |
|
| Back to top |
|
|
LinuxDude
n00b
Joined: 27 Apr 2002
Posts: 57
|
| Posted: Wed May 08, 2002 3:30 am Post subject: |
|
|
| i had problems compiling this kernel too.. but finally i unmereged and deleted all the src and modules of the kernel and emerged them again. I then reconfigured the kernel (with preemptive, no xfs) and it works like a dream... this is the best kernel yet! |
|
| Back to top |
|
|
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Wed May 08, 2002 3:36 am Post subject: |
|
|
| LinuxDude wrote: | | i had problems compiling this kernel too.. but finally i unmereged and deleted all the src and modules of the kernel and emerged them again. I then reconfigured the kernel (with preemptive, no xfs) and it works like a dream... this is the best kernel yet! |
I finally got it working, but I had to enable acpi before it would work... But now my promise ATA100 card does not work. It boots fine with the old linux-2.4.19-r1 kernel, but not with any of the gentoo (r1 or r3 sources). I get the following error:
PDC20268: IDE controller on PCI bus 00 dev 40
PCI: Could not assign IRQ 17 to device 00:08.0
The boot then stops and will not display the drives on the card... |
|
| Back to top |
|
|
Da Masta
n00b
Joined: 28 Apr 2002
Posts: 3
|
| Posted: Tue May 21, 2002 1:57 am Post subject: None of these issues/solutions address the original post! |
|
|
The preemption notices have begun to really peeve me off too and to date, I have found no solution to fix a compiled kernel. If you wish to recompile your kernel, there is a way to get rid of them:
emerge gentoo-sources
cd /usr/src/linux/kernel/
nano exit.c
# Now edit exit.c... search for the words "exited with preempt_count"
# It should come up with a printk() function call.
# Delete the entire statement starting with "if" and ending with "preempt_get_count());"
# Now compile the kernel...
make config
make dep bzImage modules modules_install install
This, as I've mentioned, is only a source-level solution. If anyone can tell me how to disable these messages (or relegate them to syslog) on a compiled kernel, I'd very much appreciate it. |
|
| Back to top |
|
|
ronmon
Veteran
Joined: 15 Apr 2002
Posts: 1043
Location: Key West, FL
|
| Posted: Tue May 21, 2002 10:50 pm Post subject: |
|
|
I had been unable to build a bootable kernel from that source. It always hung on my SCSI card, a DC390U3W that runs every drive in my box, but I could boot Gentoo from my Slackware kernel.
So I just unpacked a vanilla 2.4.18, patched it up a bit (2.4.19-pre8, mjc, i2c, lm_sensors2) and haven't had any problems at all. |
|
| Back to top |
|
|
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Wed May 22, 2002 11:53 am Post subject: |
|
|
| Hell, I even have a stock 2.5.17 kernel working, but I can't get the gentoo sources running... |
|
| Back to top |
|
|
AutoBot
l33t
Joined: 22 Apr 2002
Posts: 968
Location: Usually Out
|
| Posted: Wed May 22, 2002 5:55 pm Post subject: |
|
|
| mellofone wrote: | | Hell, I even have a stock 2.5.17 kernel working, but I can't get the gentoo sources running... |
Have you tried this also:
_________________
This message self destructed a long time ago. |
|
| Back to top |
|
|
mellofone
Apprentice
Joined: 13 Apr 2002
Posts: 287
|
| Posted: Wed May 22, 2002 6:08 pm Post subject: |
|
|
| Quote: | Have you tried this also:
|
What exactly does it do? |
|
| Back to top |
|
|
brain
Apprentice
Joined: 16 May 2002
Posts: 229
Location: Farmington Hills, MI
|
| Posted: Wed May 22, 2002 6:58 pm Post subject: |
|
|
| mellofone wrote: | | Quote: | Have you tried this also:
|
What exactly does it do? |
The 'mrproper' resets your kernel sources back to "clean" state (i.e. unconfigured).
_________________
--brain |
|
| Back to top |
|
|
|
Kernel & Hardware
