Lawless l33t
Joined: 03 Nov 2003 Posts: 638 Location: Germany
|
Posted: Thu Jul 22, 2004 3:24 pm Post subject: Fax receive - problem |
|
|
Hiho,
I see there must be a very small number of efax users - but perhaps anyone can help me.
I'm running efax with a 56k modem - sending is ok but receiving does not exactly do what it should.
When there is an incoming fax efax receives it correctly but at the end of every page it answers with a recption error so that the caller resends it.
However every transmitted page is fully correct.
So why this error command at the end of every page?
I give you a little debug output
Code: |
efax: Thu Jul 15 14:51:00 2004 activity detected
efax: 51:00 waiting 120.0 s
efax: 51:00 .667 [<CR><LF>RING<CR><LF>]
efax: 51:00 waiting 120.0 s
efax: 51:08 .793 [<CR><LF>+FCO<CR><LF>]
efax: 51:13 .868 [<CR><LF>+FTI:" ******"<CR><LF>]
efax: 51:13 .881 [<CR><LF>+FCS:0,5,0,2,0,0,0,1<CR><LF>]
efax: 51:13 .908 [<CR><LF>OK<CR><LF>]
efax: 51:13 response "OK"
efax: 51:13 fax call answered
efax: 51:13 remote ID -> " ******"
efax: 51:13 session 98lpi 14.4kbps 8.5"/215mm any 1D - - 5ms
efax: 51:14 command "+FDR"
efax: 51:14 waiting 60.0 s
efax: 51:15 .983 [<CR><LF>CONNECT<CR><LF>]
efax: 51:15 response "CONNECT"
efax: 51:28 received 1133 lines, 0 errors
efax: 51:28 waiting 16.0 s
efax: 51:28 .428 [<CR><LF>+FPS:1,473,0,0,0<CR><LF>]
efax: 51:29 .647 [<CR><LF>+FET:2<CR><LF>]
efax: 51:29 .652 [<CR><LF>OK<CR><LF>]
efax: 51:29 response "OK"
efax: 51:29 Warning: reception errors
efax: 51:29 command "+FPS=2"
efax: 51:29 waiting 3.0 s
efax: 51:29 .690 [<CR><LF>OK<CR><LF>]
efax: 51:29 response "OK"
efax: 51:29 wrote Jul15-14.02.13.001 as 1728x1133 pixel 204x98 dpi TIFF page (17552 bytes)
efax: 51:29 command "+FDR"
efax: 51:29 waiting 60.0 s
efax: 51:32 .796 [<CR><LF>+FHS:00<CR><LF>]
efax: 51:32 .813 [<CR><LF>OK<CR><LF>]
efax: 51:32 response "OK"
efax: 51:32 wrote Jul15-14.02.13.002 as 1728x0 pixel 204x98 dpi TIFF page (10 bytes)
efax: 51:32 removed Jul15-14.02.13.002
efax: 51:32 read value 0 from "00"
efax: 51:32 command "Q0V1"
efax: 51:32 waiting 2.0 s
efax: 51:32 .960 [<CR><LF>OK<CR><LF>]
efax: 51:32 response "OK"
efax: 51:33 command "Z"
efax: 51:33 waiting 5.0 s
efax: 51:33 .180 [<CR><LF>OK<CR><LF>]
efax: 51:33 response "OK"
efax: 51:33 done, returning 0 (success)
|
This output gets repeated for every retry of the callers fax machine.
What can I do?
Tried hylafax but got it never to run. This is just a single user fax for a few faxes per month. Hylafax was too big and too complicated to me... _________________ Kernel panic: I have no root and I want to scream |
|